一种用灯黑浸染的塑性材料。
这是一个非常强大的和耐用的塑性材料。
织物粘接剂或热塑性材料的中间层连接。
The fabrics are connected by bonding agents or by means of intermediate layers of thermoplastic materials.
使用这种方法,形成中空物体的热塑性材料。
This method is used to form hollow objects out of thermoplastic materials.
有机玻璃是一种具有形状记忆性的热塑性材料。
PMMA is one kind of hot plastic material with shape memory faculty.
为简单起见,将两相介质视为理想刚塑性材料。
For simplicity the two phase media is regarded as ideal plastic.
这个特性将热塑性材料与热硬化性材料区分开。
This property differentiates thermoplastic materials from thermosetting ones.
可是在塑性材料加工时,造成表面光洁度和刀具寿命低。
However, in case of ductile materials they cause poor surface finish and low tool life.
由于需要对凹槽进行硬化,所以需要指定塑性材料和回火。
Due to work hardening in the groove area, ductile materials and tempers should be specified.
本文讨论了塑性流动理论中的理想刚塑性材料的动力学问题。
We discuss the dynamics problems of ideal rigid-plastic material in the flow theory of plasticity in this paper.
该主体至少部分由塑性材料或纤维增强塑料(FRP)制成。
The body is at least partially made of a plastic material or a fiber reinforced plastic (FRP).
包覆拉深工艺是一种适合于低塑性材料拉深成形的工艺方法。
Based on experiments, a novel forming technology was presented, named as "packed-layer drawing".
利用新的含微孔材料模型对塑性材料局部剪切失稳进行了分析。
By means of a new void - containing material model, analysis of shear localization for plastic materials is carried out.
一直以来,聚丙烯都是无数应用领域中热塑性材料的选择之一。
Polypropylene continues to be the thermoplastic of choice for countless applications.
对弹塑性材料裂纹扩展阻力曲线是惟一的,与裂纹初始长度无关。
The material resistance curve is unique and independent on crack initial lengths.
注射成型的基本概念是使热塑性材料在受热时熔融,冷却时硬化。
The basic concept of injection molding revolves around the ability of a thermoplastic material to be softened by heat and to Harden when cooled.
根据后桥壳液压胀形的特点,选择刚塑性材料模型进行模拟分析。
According to the characteristic of hydroforming for rear axle housing, rigid-plastic material model is elected as tube blank material model process simulation analysis.
采用上限方法,给出了多孔粘塑性材料正交流动法则存在的条件。
And, taking terms of an upper bounded approach, the existence condition for a normal flow regulation is obtained for the voided viscoplastic material.
采用液压传动,本系列机床适用于塑性材料的冲裁、拉伸和压制工艺。
Adopts hydraulic drive, this series machine is suitable for the plastic material of blanking, drawing and pressing process.
“乙烯基”是一种塑性材料,它不像其他的塑料,可以很容易地被回收。
Vinyl is a plastic material, which unlike other plastics, can easily be recycled.
通过锡铅超塑性材料的挤压实验,探讨了超塑态挤压变形力的计算问题。
By way of experimental study, This paper approached the problem o calculating extrusion force of the superplastic tin-lead alloy.
采用大变形刚塑性有限元法模拟超塑性材料轴对称锥形模约束胀形过程。
The constrained superplastic bulging process is investigated by a large rigid-plastic finite element method.
红外光谱分析表明聚合较为完全,聚合物不存在支链结构,为热塑性材料。
The infrared spectrum analysis showed that the polymerization reaction was complete, and the polymer was a kind of thermoplastic material without branched chains.
绕组线的封装。第4部分:试验方法。第1节:由热塑性材料制成的绕线轴。
Packaging of windings wires . part 4 : methods of test . section 1 : delivery sppols made from thermplastic material.
该方法不仅适用于理想弹塑性材料,而且适用于常规的具有硬化趋势的材料。
The method was not only suitable for ideal elastic plastic materials, but suitable for the normal materials with hardness trend.
目前研究塑性材料流动的方法主要有钢球跟踪技术、微观图像法及标签法等。
The main methods used to study materials flow including steel ball as tracers, metallographic and insert marker methods.
采用塑性变形理论和刚粘塑性材料模型研究了直流电阻对焊接头的塑性变形。
The joint deformation of DC upset butt welding was studied by using theory of plastic deformation and rigid-viscosity plastic material model.
本文的试验结果可作为其它类型超塑性材料超塑成形后力学性能分析的参考。
There is much in this articles results that we can use for reference to other type superplastic materials mechanical properties analysis after superplastic forming.
热固性材料与热塑性材料的竞争会导致热固性材料性能的进一步提高与完善。
The competition between thermoplastic and thermoset composites will on-ly make the thermosets better.
用有限元方法对平面应力条件下弹塑性材料的裂纹尖端应力应变场进行了计算。
The crack tip stress-strain field of elastic-plastic materials are analysed by finite element method in the plane stress condition.
应用推荐