文章介绍了两种CMOS带隙基准电路。
Two types of CMOS bandgap reference circuits are presented in this paper.
另外设计了启动电路以确保基准电路能正常工作。
The start-up circuit was design for the bandgap voltage reference circuit working normally.
将建议方案用于ITC’02基准电路典型芯核的测试链平衡划分。
The proposed technique is applied to the typical cores of ITC'02 SoC benchmarks.
这种新型电压基准电路适用于锂电池保护芯片，提供检测基准电压。
The novel voltage reference source was applied to a Li-ion battery protection IC to provide various detection voltages.
介绍了一种低压电流模带隙电压基准电路，并提出了一种新颖的启动电路结构。
A low voltage current mode bandgap voltage reference circuit with a novel start-up circuit is designed.
针对基准电路的实验结果表明，本文方法能够明显的减少电路产生的动态功耗。
Experimental results on a number of benchmarks show that the proposed approach can significantly reduce the dynamic power consumption of circuits.
设计了一种用于新型非制冷irfpa读出电路的低温漂的低压带隙基准电路。
A low voltage bandgap reference for a novel uncooled IRFPA readout circuit is presented.
在ITC'02基准电路上的实验结果验证了基于对平衡测试调度算法的有效性。
Experimental results for two ITC '02 SOC benchmark show that the pair balance-based test scheduling achieves less test time compared to the previous approaches.
实验IS CAS89基准电路显示的可接受的时间内，该算法可以应用到电路的合理尺寸。
Experiments on ISCAS89 benchmark circuit show that the proposed technique can be applied to circuits of reasonable sizes within acceptable time.
针对基准电路的实验结果表明，该方法在优化互连功耗方面与现有方法相比具有明显的优越性。
Experimental results on a number of benchmarks demonstrates the superiority in reducing the interconnect power compared with the existing methods.
因此介绍了一种采用自偏置低压共源共栅电流源的带隙基准电路结构，用两个电阻代替了偏置电路。
This paper introduces a low supply voltage band -gap reference circuit which used a self-bias cascode current mirror.
针对IS CAS- 89基准电路硬故障集的实验结果表明，该方法是一种非常高效的压缩方法。
Experimental results for the hard fault set of the ISCAS-89 benchmark circuits show that the proposed method is a very efficient compression method.
从分析典型的能隙基准电路的一般原理入手，重点讨论了一种输出可调节的CMOS能隙基准电路的设计。
Starting from analyzing the general principle of typical bandgap reference circuit, the design of a CMOS bandgap reference circuit with adjustable output is discussed.
该方法在布线资源中随机产生均匀分布的开路故障，并绕开障碍物布线互连，不依赖于CAD算法和基准电路。
Uniform stochastic open faults are produced in the routing resource, and we route interconnections around obstacles. This method does not depend on CAD tools and benchmark circuits.
针对ISCAS-89基准电路硬故障集的实验结果表明，所建议方案的压缩效果优于混合码，是一种高效的压缩方法。
Experimental results for the hard fault set of the ISCAS-89 benchmark circuits show that the proposed method, which is superiority to hybrid coding, is an efficient compression method.
由于AD 7520中没有基准电路，所以在查阅了大量资料的基础上，正向设计了一款带隙基准源，并与AD 7520集成在一起。
Since there is not the referenced voltage circuit, we have read a lot of information and designed a kind of bandgap source integrated with AD7520.
固定频率源可以在在通讯系统和雷达系统中作为本机振荡器，也可以作为数字电路的基准时钟信号，因此得到了广泛的应用。
Single frequency source is usually used as local oscillator in communication system and radar system, also as a reference clock in digital circuits, so it is a extensive-applied technique.
该带隙电压基准源电路中的深度负反馈运算放大器为低失调、高增益的折叠型共源共栅运算放大器。
A deep negative feedback operation amplifier used in band gap reference is a common source and gate folded cascade operation amplifier with a lower offset voltage and a higher gain.
提出了一种能够自产生基准电压和偏置电流，并且锁定阈值电压和迟滞量稳定的新型欠压锁定电路。
A novel under-voltage lockout circuit is proposed which could generate reference voltage and bias current itself, and could stabilize lockout threshold voltage and hysteresis quality.
阐述了AD 7710的模拟电压输入、基准电压输入以及与微处理器的数字接口电路。
The circuit of analog input, reference input and the serial digital interface with microcomputer of AD7710 is presented.
介绍了在电阻式传感器测量电路中采用多基准源进行实时自校正的技术。
The technology of real time auto-correction by using multiple reference sources in measuring circuit in resistance transducer is introduced.
设计了一种具有良好稳定性和高精度的带隙基准电压源电路。
A bandgap voltage reference circuit with good stability and high accuracy is designed in this pa - per.
基于精密基准电压源lm199的解剖，对其恒温电路作了全面的计算机辅助分析。
An overall computer-assisted analysis of the temperature control circuit for the precision reference voltage source LM199 has been made.
设计构成可复用的与通用数字电路工艺兼容的高稳定度基准电压源具有重要意义。
Therefore, it is significant to develop a voltage reference circuitry that is compatible with digital CMOS technology and can be integrated into a system on a chip (SOC).
并对勃鲁宁电桥、动态基准（或取样—保持）电路以及HW-1型冲床安全保护器的主要性能作了分析。
Analyses are also presented of the Blumlain bridge, dynamic criterion circuit and main characteristics of press protector type HW-1.
基准电压产生电路为带隙电路的扩展，节省了资源并得到了高稳定度的基准电压。
The voltage reference generator was the expansion of the bandgap circuit for saving the resources.
带隙基准电压源之所以是模拟电路中重要的模块，是因为它能够提供近似恒定的参考电压，这个电压不随温度，电源电压，工艺的变化而变化。
Bandgap reference voltages are important analog circuit blocks. It can provide a nearly constant reference voltage which is stabilized over process, power supply and temperature variation.
提出了一种新型的指数曲率补偿带隙基准源电路。
A novel exponential curvature-compensated bandgap reference circuit is presented.
对激光基准信标仪中所采用的液体摆角传感器的结构进行设计，分析其工作原理、放大电路。
The construction of the liquid angular sensor in the laser beacon is designed, the work principle and magnify circuit are analysed.
本文研究了一种采用数字化技术，实现与电网电压同步的基准正弦电路的原理，给出了电路关键参数的设计原则。
A reference sinusoidal circuit based on digital technique and synchronous with the line voltage is investigated. The design principle of the key circuit parameters is given.
应用推荐