集成基准电压源可简化设计。
An integrated voltage reference eases design considerations.
基准电压源是模拟电路中的一个重要单元。
Voltage reference is one of the most important cells in analog circuit.
完整解决方案：基准电压源和采样保持器。
设计了一种高准确度无电阻的带隙基准电压源。
A high accuracy band-gap reference voltage without resistor is designed.
基准电压源是集成电路系统中一个非常重要的构成单元。
设计了一种具有良好稳定性和高精度的带隙基准电压源电路。
A bandgap voltage reference circuit with good stability and high accuracy is designed in this pa - per.
提出了一种新颖的带有软启动的高精密CMOS带隙基准电压源。
This paper proposes a novel high precision CMOS bandgap voltage reference which with a soft-start up circuit.
在基准电压源的设计中，如何实现高精度、低温度系数是一大难点。
Voltage Reference in the design, how to achieve high-precision, low temperature coefficient is a major difficulty.
提出了一种新型的低电压、低功耗、工作在亚阈值区的基准电压源。
A new low-voltage low-power CMOS voltage reference operating in subthreshold region is presented.
设计高性能的基准电压源和比较器是模拟电路工程师一直努力的目标。
To design voltage reference and comparator with high performance is a long-term pursuit of analogy IC designers.
也可以选用外部基准电压源，以满足应用的直流精度与温度漂移要求。
An external reference can also be chosen to suit the dc accuracy and temperature drift requirements of the application.
将此电压与基准电压源(REF)进行比较，得到了被放大的误差电压。
After this voltage was compared with REF, we can get the magnified error voltage.
运用带隙基准的原理，提出了一种带启动电路的低功耗带隙基准电压源电路。
A low power CMOS bandgap voltage reference source with a start-up circuit is presented based on the bandgap voltage theory.
设计构成可复用的与通用数字电路工艺兼容的高稳定度基准电压源具有重要意义。
Therefore, it is significant to develop a voltage reference circuitry that is compatible with digital CMOS technology and can be integrated into a system on a chip (SOC).
基于精密基准电压源lm199的解剖，对其恒温电路作了全面的计算机辅助分析。
An overall computer-assisted analysis of the temperature control circuit for the precision reference voltage source LM199 has been made.
基准电压源根据传统带隙基准温度补偿原理，设计了一级温度补偿的片上带隙基准源。
The design of a linear temperature compensation voltage bandgap reference is based on the traditional bandgap.
片内可编程基准电压源和基准电压缓冲放大器经过配置，可获得最高的精度和灵活性。
The on-chip programmable reference and reference buffer amplifier are configured for maximum accuracy and flexibility.
该器件内置一个精密低噪声、低漂移内部带隙基准电压源，也可采用外部差分基准电压。
The device contains a precision low noise, low drift internal band gap reference and can also accept an external differential reference.
本文分别对系统中各个模块做了介绍，特别介绍了带隙基准电压源和看门狗这两个重点模块。
To reduce the cost, the CMOS process was adopted. This paper introduces each module, especially bandgap and watchdog.
这是一款完整的单芯片adc，内置片内高性能、低噪声采样保持放大器和可编程基准电压源。
It is a complete, monolithic ADC with an on-chip, high performance, low noise sample-and-hold amplifier and programmable voltage reference.
设计了基准电压源和电压微调电路，为adc提供参考电压和电流，而且能进行一定范围内的微调。
Design a bandgap voltage reference circuit and a voltage-modifying circuit to provide precise voltage and current reference for the referred ADC.
通过对电压源传统设计中关于速度、噪声、工作温度范围方面的研究，设计了一种带隙基准电压源。
We have provided improvements on speed, noise, temperature operating range issues compared with traditional bandgap reference design.
提出了一种新颖的利用负反馈环路以及RC滤波器提高电源抑制比的高精密CMOS带隙基准电压源。
In this paper, a novel high precision CMOS bandgap voltage reference which USES a negative back circuit and a rc filter to enhance the PSRR is proposed.
数模转换器、模拟集成滤波器、基准电压源和高驱动能力运放等电路是通信系统中不可缺少的基本电路。
Digital to analog converter, analog integrated filter, bandgap reference and high drive capability operational amplifier are indispensability basic circuit of communication system.
用此工具可方便精确地分析计算基准电压源设计中的温度特性及电源电压抑制比等参数，大大提高设计效率。
The temperature characteristic, Voltage control rate and other parameters can accurately be analyzed, and design efficiency can greatly be raised by using the tool.
可程控基准电压源不仅要满足传统基准电压源的所有性能指标要求，其输出电压还可通过外部数字信号来精确设定。
Except for traditional circuit requirements, programmable voltage reference requires that its voltage can be preset and regulated accurately through external digital signals.
基于带隙基准的基本原理，设计了一种高精度、高电源抑制比(PSRR)、低温度系数(TC)的带隙基准电压源。
Based on the basic principle of bandgap reference, design a high precision, high power supply rejection ratio (PSRR) and low temperature coefficient (TC) bandgap voltage reference.
偏置电流源电路的设计：利用带隙基准电压源提供的，通过运算放大器为系统其他的模块提供一个与温度无关的稳定的电流偏置。
The current bias design: Taking advantage of the bandgap reference voltage, the temperature independent current bias for the system is designed by an operation amplifier.
它内置一个16位高速采样adc、一个内部转换时钟、一个内部基准电压源(和缓冲)、纠错电路，以及串行和并行系统接口端口。
It contains a high speed 16-bit sampling ADC, an internal conversion clock, an internal reference (and buffer), error correction circuits, and both serial and parallel system interface ports.
它内置一个16位高速采样adc、一个内部转换时钟、一个内部基准电压源(和缓冲)、纠错电路，以及串行和并行系统接口端口。
It contains a high speed 16-bit sampling ADC, an internal conversion clock, an internal reference (and buffer), error correction circuits, and both serial and parallel system interface ports.
应用推荐