其中，船体曲面模型是根据型线设计而生成。
The whole ship model is generated according to linear design.
船舶型线设计在船舶设计中居于十分重要的地位。
Ship lines design has been playing the important role in ship design.
在建立WPC船的数学模型之后，研究具体的适合于WPC船的型线设计方法。
Research its concrete hull lines design methods after establishing WPC mathematical model.
因此对双螺杆泵转子型线设计及加工技术研究具有重要的理论意义和工程实用价值。
Therefore, research the profile design and processing technology of twin-screw rotor has important theoretical significance and practical value.
重点介绍了计算活塞裙部型线方程，给出了从图纸到中凸靠模板曲线板型线设计的方法。
The paper mainly introduces the calculating equation for piston skirt molded lines, the drawing of piston, and the design for convexity mother plate molded lines.
不仅为配气凸轮型线设计提供了新的途径，还可广泛用于其它凸轮型线设计，经对实例的计算比较，效果显著。
This paper not only provides a new method for the valve cam design, but also a method which can be app-lied to other cam designs. Computation of practical examples…
文章认为在船尾型线设计中若不考虑横剖线的UV度、各水线去流角大小等对船体振动的不利影响，很可能会导致艉部水流异常；
This paper posits that the flow at stern will be unusual if designing stern lines without considering of U or V of body lines and exit angle of water lines;
为了抵御这次的大事件，工程师们画出了一条额外的警戒线，把所有的物体都放入这个容器型建筑中(之前介绍过)，当初设计的时候它就能容纳所有的物体。
To mitigate such an event, engineers designed an extra line of defense by putting everything into the containment structure (see above), that is designed to contain everything inside the structure.
在分析了M型T形节延时线的延时特性基础上，对其设计方法、工艺要求等做了较详细介绍。
Having analysed the delay characteristics of m type t shape node lines, its design method and technical requirements are detailedly introduced.
阐述综合试验船的设计要求、船型选择、型线优化设计、船模试验研究及实船航行试验。
The design requirements, shipform selection, lines optimal design and model test research, and full scale navigating trial of a test boat with multipurpose are presented.
通过采用合理的铸造工艺，确保了其叶片型线尺寸精度、转轮表面质量及铸件内部的致密度满足了设计要求。
By adopting appropriate foundry techniques, the accuracy of dimension and shape were ensured. The surface quality and internal density of runner meet the requirements of design.
型面轮廓：与水平线相比表面的实际轮廓线；实际设计的外圈，内圈或滚子的轮廓线。
PROFILE: The true picture of a surface in relation to a horizontal line; a contour of a designated surface of a cup, cone, or roller.
重点针对配气凸轮传统设计方法的缺陷，提出一种用解析函数法与数值法相结合设计凸轮型线的新方法。
Aimed at the deficiencies of traditional design method for valve train CAM, a new method for designing CAM profile with analysis functions and numerical synthesis is proposed.
为凸轮型线、摇臂形状和整个配气机构的设计改进提供了重要依据。
The important basis on design improvement for cam profile, rocker form and valve train have been provided.
结合已设计出的45～76焊管生产线中的六辊矫直机，阐明了矫直辊辊型设计的一种方法。
The paper, combined with the 45~76 straightening machine designed, provides a theoretical method for designing the straightening roll camber.
通过对加工出的转子型线进行检测和分析，表明转子型线的优化设计是成功的，达到了设计要求。
Examining and analyzing of the finished rotor profiles show that the optimized design has been succeeded and reached the designing requirement.
建立了七次多项式动力凸轮型线的优化设计数学模型；
The mathematical model of optimizing design for hepta polynomial dynamic cam was established.
介绍了螺旋焊管成型器内压辊斜置小辊线接触辊型的设计方法（经验公式设计法）。
The article introduces the design methods of contact roller of internal press roller of forming machine of SSAW pipe mill(experience formula design).
为不断完善转子型线参数，实现罗茨泵系列化设计、生产，满足敏捷制造技术需要奠定基础。
Establishing the foundation to improve the rotor shape parameter dramatically, realizing the Roots pump series design and production, sufficing the condition of the agile manufacturing technology.
提出一种新型肘形进水流道，具有型线简单，容易设计和施工方便等优点。
A new type elbow inlet conduit was proposed, with the features of simple in shape, easy to design and convenient for construction.
研究人员在对型线类型设计和优化的研究中，缺乏简洁有效的模式，往往简化为单目标优化问题，而且采用传统的方法与手段。
Many researchers usually simplify it as a single optimization problem using traditional methods for lack of the concise and effective mode.
以离心压缩机扩压器叶栅为例，在两个给定设计工况下采用所提出的方法求解其最佳叶片型线。
A diffuser cascade of a centrifugal compressor was chosen to be designed with the proposed approach, with its two operating points specified, and its blade profile to be optimized.
本文介绍一种计算机辅助设计的新的系列化罗茨泵转子型线。
This paper introduces a new series of rotor form line of CAD system.
进行配气凸轮型线的改进设计及其主要影响因素的探讨，并提出了优化设计方案。
By carrying out CAM profiles design and some mostly impacting factors are discussed, then some optimal design schemes are put forward.
当您设计这种类型的塑料模具，型线的设计必须根据马克斯轮廓曲线。
When you design this type of plastics mold, parting line must be designed according the Max silhouette curves.
也可不用任何解析计算，随意地设计出理论上可行的型线。
Workable cycloids can be designed at will and without analytic computation.
为了实现射频传输线的薄衬底结构，根据共面波导的设计思想，设计了腔体式共面波导型射频微机械开关。
In order to realize thin dielectric structure of the transmission line and combined the principle of the design of CPW, a cavity structure has also been studied.
根据这三条准则，可设计出叶轮较佳几何参数和型线。
The optimized geometry and profile of the inducer and impeller can be found by designing in accordance with there criteria.
介绍了峡口水利水电枢纽工程技施设计阶段坝基开挖线、拱坝坝型和拱坝体型优化设计成果。
The optimization design results of the dam base excavation outline and the type and body shape of the arch dam of the Xiakou Hydraulic Project are introduced.
介绍了峡口水利水电枢纽工程技施设计阶段坝基开挖线、拱坝坝型和拱坝体型优化设计成果。
The optimization design results of the dam base excavation outline and the type and body shape of the arch dam of the Xiakou Hydraulic Project are introduced.
应用推荐