介绍了一种简易手工卷圆模。
A kind of simple manual rolling circularity die was introduced.
对可调抱圆模的调节计算及使用方法作了示例和说明，并将调节后的调节值列表备查。
Thirdly, examples and descriptions are given for the adjusting calculations and operating methods for the adjustable rounding moulds. A table of adjusting figures after adjustment is attached also.
把面团放到烤模，用手把面团向四处均匀摊开，形成3厘米高度圆模即可。用叉子在底部叉出小孔。
Spread the dough evenly on the bottom of the spring form and gently press against the sides of pan, about 3cm at height. Prick the bottom with a fork.
第二个是蓬佐错觉，志愿者可以看见在一条隧道的图像上有两个大小一模一样的圆。
In a second optical illusion, the Ponzo illusion, the volunteers were shown two identically sized circles superimposed onto the image of a tunnel.
采用模匹配方法分析了月形波导和加片圆波导的截止频率。
The Lunar waveguides and vained circular waveguides are analyzed by using the mode matching method.
根据具体情况随时可以快速调换相应的凸模和圆凹模，及转盘的快速定位，类似于数控转塔冲床，来达到加工产品多品种的要求。
We could quickly change punch and round concave at anytime production required, the quick location of turntable like nc revolving tower type press machine, it could produce many kinds of productions.
针对具有整圆内侧倒扣特征的注塑件，设计了一种新颖的注塑模内缩机构。
A novel internal core pulling mechanism of injection mould is designed for the part with internal full circle undercut.
并利用时域最小二乘法和复模圆法对实验数据进行了三维的模态参数和振型分析。
Modal parameters and vibration type were obtained by the method of least squares time domain, complex modal analysis and the experimental data.
介绍一种卷圆工艺和模具，并对模具弯曲成形过程进行了分析，指出该方法可以用于级进模上成形。
It has been recommended a technology and die of bending ring with analysis of its forming process, using in that of bending ring in progressive forming die.
在工作过程中，冲头与凹模切口的半径定位，确保形成所需的圆形，而不至于在圆边产生“缺口”。
The radius of the punch and die cutting edges is laid out to produce the desired circular shape without nicking into the circle as the work proceeds.
模造纸：（1）用纸模手工抄造的纸。（2）用圆网造纸机所造的纸。
Mould-made paper: (1) Paper made by hand in a mould. (2) Paper made on a cylinder machine.
许多高功率微波源产生的微波模式都是圆波导轴对称模，因此研究轴对称模式的天线辐射技术具有重要意义。
It is important to study the antenna that can directly radiate cylindrically symmetric modes, which are generated by many high power microwave sources.
在滚锻时，圆的或是扁平的棒料放在模辊之间缩小横截面增加长度制成诸如轮轴、板簧之类的零件。
Roll forgings. In roll forging, a bar stock, round or flat is placed between die rollers which reduces the cross-section and increases the length to form parts such as axles, leaf springs etc.
冷镦圆头凹模是冷镦螺栓生产过程中的关键模具。
Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.
讨论了单模光纤的偏振模色散PMD，包括PMD与单模光纤的几何尺寸及应力的非圆对称的关系；模间耦合的影响。
The PMD in singlemode fiber, including the relationships between PMD and the circular asymmetries of geometry and stress in fiber, the influence of mode coupling on PMD, are discussed.
分开制作好的黏土面具另外翻模用石膏灌注出石膏的面具头像，之后再用黏土在石膏面具头像上雕塑出头顶圆盔。
The mask was done separately, so the mask was then molded and cast. I then had a cast in plaster of the mask and on top of that I sculpted the helmet in clay.
对类似厚材料小半径卷圆零件的多工位级进模设计有一定的参考价值。
There was some reference value to similar parts with big thickness and litter bending radius.
系列圆压模切产品遍布全国，并远销东南亚及欧美市场。
The serial cylinder die-cutting products are sold all over the country, Southeast Asia and Occident.
基于耦合模理论，提出一种判别圆双折射光纤的简易方法。
Based on the coupled-mode theory, a simple method to distinguish circular-birefringence fibers is presented.
本公司一如既往的为广大新老客户提供信赖的圆压模切产品。
The corporation will provide reliable cylinder die-cutting products as ever.
介绍了一种无飞边、多腔、圆截面橡胶密封圈压模的设计方法及制造技术，采用这种方法设计制造的模具结构简单、可靠，生产的产品质量良好。
The design technique and manufacture technology for a kind of multi-cavity, no-burr and round-section rubber sealing ring with multi-cavity and no-burr were introduced.
介绍了一种无飞边、多腔、圆截面橡胶密封圈压模的设计方法及制造技术，采用这种方法设计制造的模具结构简单、可靠，生产的产品质量良好。
The design technique and manufacture technology for a kind of multi-cavity, no-burr and round-section rubber sealing ring with multi-cavity and no-burr were introduced.
应用推荐