圆弧齿轮是一种高承载能力的动力传动齿轮。
The circular arc gear is one kind of high bearing capacity power drive gear.
并对双圆弧齿轮的成形过程提出了自己的见解。
The forming process of the double -circular -arc gear is put forward in this article.
介绍了圆弧齿轮M值的测量方法和数值计算公式。
A measuring method and calculation on value m of circular tooth gear are introduced.
模型的建立为解决双圆弧齿轮动载荷问题提供了依据。
Mostly conforming to the actual gearing and loading conditions, the model sets a basis for solving the dynamic problems of double-arc gears.
计算分析结果为双圆弧齿轮的设计和使用提供了理论依据。
The results provided theoretical basis for the design and application of double-arc gear.
非渐开线展成滚刀还可加工圆弧齿轮﹑摆线齿轮和链轮等。
The involute generative hob can also manufacture of arc gear, cycloid gear and sprocket, etc.
本文讨论了法向圆弧齿轮在有中心距偏差及切深偏差时的啮合。
This paper deals with the engagement of gears with circular arc profile in normal plane at the presence of errors on center distance and depth of cut.
本设计的理论基础是有关圆弧齿轮的机械原理和机械设计的知识。
The knowledge of the machine design that concerning the arc wheel gear is the theories foundation of our design.
二级分流式双圆弧齿轮减速箱结构参数对其振动特性有一定的影响。
The structure parameters have some relation with the vibration behaviors for the reducing box with two stage split flow Novikov gear of with double circular arc tooth profiles.
本文以CC B型齿轮泵为例，分析了圆弧齿轮泵的低噪声等特性。
Taking type CCB gear pumps, this paper analyzed such characteristics of the circular tooth gear pump as low noise.
在此基础上，本文给出了双圆弧齿轮传动的小振动、低噪声设计准则。
On this basis, a design criterion of small vibration and low noise for the dual circular-arc gears is given out in this paper.
然而，我国对硬齿面双圆弧齿轮传动承载能力及可靠性的研究尚属起步。
However, research on loading capacity and reliability of this kind gear is still at initial stage.
叙述了准端面双圆弧齿轮的形成原理，推导了这种齿轮的通用齿面方程。
Theory of quasi-circular-arc gear's shaping is discussed in this paper, and its common tooth-surface equation is developed.
并根据相关文献给出ZY - 1型双圆弧齿轮基本齿廓的详细参数取值表。
And in accordance with the relevant literature, the detailed parameters table of the ZY-1 type double-circular-arc gear basic tooth profile is given.
介绍并推导双圆弧齿轮在安装误差影响下接触迹间载荷分配的计算公式和方法。
The load assignment formula and the method of the double circular arc gear under the wiring error influence between the contact mark was introduced and inferred.
双圆弧弧齿锥齿轮是将点啮合制圆弧齿轮传动形式运用到锥齿轮上的成功例子。
Its basic gear tooth profile is double circular arc spiral bevel gear tooth profile.
该模型为双圆弧齿轮的三维数字化设计、有限元分析、虚拟制造等奠定了基础。
The model establishes the base for the 3D digital design, analysis of the finity unit, dummy manufacture of the double-circular-arc gear.
本文用回归分析法求得了GB12759—91型双圆弧齿轮的齿腰应力的计算公式。
A formula is given to calculate the stress in tooth middle of GB12759-91 double circular-arc gear via regression analysis in this paper.
计算结果表明，准端面圆弧齿轮基本上是沿齿高方向等强度分布，优于法面圆弧齿轮。
Computing result indicates that quasi transverse circular arc gear is basically equal on strength distributing along tooth depth direction and it is superior to normal plane circular arc gear.
对比渐开线齿轮泵，单圆弧齿轮泵的瞬时排量与齿轮角速度成正比，且稳定，无脉动。
Comparing with involute gear pump, the instant displacement is in direct proportion to the angular velocity of the gear and stable without pulsation.
试图用尽可能快的速度、单、懂、行的方法设计出技术经济效果最佳的双圆弧齿轮传动。
It tryes to design double arc gear transmission of the best technology and economy effect making the best of speed, simpleness and understandability and feasible method.
双圆弧齿轮减速器中心距和传动比分配的确定，直接影响减速器承载能力、重量和体积。
The selection of center distance and gear ratio distribution for a reducer with double-circular-arc gear will have a direct effect on its size, weight and loading capacity.
为此，郑州机械研究所针对低速重载齿轮传动领域设计了ZY-1型硬齿面双圆弧齿轮齿形。
Aiming at heavy duty and low speed gear transmission, Zheng Zhou Research Institute of Mechanical Engineering puts forwards ZY-1 case- hardened double-circular-arc gear.
并且证明，法面双圆弧齿轮的每一段端面齿廓都是对应椭圆曲线段在相对运动中的包络曲线。
Moreover, the extreme shape of the normal double circle gearing proves to be the involved curve of the corresponding ellipse.
本文详细地推导出加工双圆弧齿轮的砂轮截面廓形的计算表达式、并研制了通用的计算程序。
The expression of the axis section profile of grinding wheel used to machine double-circular-arc gear is derived in detail. And the general calculator program is developed.
试图用尽可能快的速度、简单、易懂、可行的方法设计出技术经济效果最佳的双圆弧齿轮传动。
It tryes to design double arc gear transmission of the best technology and economy effect making the best of speed, simpleness and understandability and feasible method.
圆弧齿轮传动是一种轴向共轭、点啮合制的齿轮传动，运动的传递依靠接触迹沿轴向移动实现。
The circular arc gear drive is one kind of axial conjugate gear drive which meshes in points. The movement transmission depends contact mark along the end motion to realize.
通过本文工作，得出中心距误差对准端面双圆弧齿轮敏感性小于其对法面双圆弧齿轮的敏感性。
Through this work, the paper conclusion has confirmed the theory which sensitivity of center-distance tolerance on the Quasi-transverse-circular-arc gear less than normal circular gear.
双圆弧齿轮齿端修形是减小啮入冲击、降低传动噪声、避免齿端崩角、提高使用寿命的有效措施。
The tooth end relief is an effective process for double circular arc gear to lighten the shock, lower the meshing noise, and prevent the tooth end from breakage, so as to prolong the service life.
双圆弧齿轮齿端修形是减小啮入冲击、降低传动噪声、避免齿端崩角、提高使用寿命的有效措施。
The tooth end relief is an effective process for double circular arc gear to lighten the shock, lower the meshing noise, and prevent the tooth end from breakage, so as to prolong the service life.
应用推荐