带有10-32个螺纹的螺纹接线柱被固定在管状加热元件上，确保正极接触，用于最大安培载荷能力。
Threaded post terminals with 10-32 threads are securely fastened to the tubular heating element, assuring positive electrical contact for maximum amperage carrying capacity.
在相同垂直载荷和水平载荷情况下，分析基牙牙周膜厚度不同时固定桥的应力分布。
Stress distribution of fixed bridge loaded with the same vertical and horizontal forces was analyzed during different thickness of periodontal membranes around abutments.
支撑体，用于支撑体的固定装置，具有所述支撑体的用于处理幅材的设备，在该设备中形成一延伸夹持部并控制该夹持部中的载荷的方法。
Support body, holding device therefor, apparatus with such body for treatment of a web, methods of forming an extended nip in the apparatus and controlling load in the nip.
因此，如何准确计算发动机固定装置的载荷，对飞机的设计乃至其飞行安全都有着重要意义。
Therefore, correct calculation of the load on engine mount is full of great significance in aircraft design and flight safety.
脊柱内固定装置所承受载荷的测量已有10例患者。
Loads on internal spinal fixation devices have been measured in 10 patients.
在相同垂直载荷和水平载荷情况下，分析固定桥基牙牙周膜厚度不同时牙周膜内的应力分布。
Stress distribution of periodontal membrane loaded with the same vertical and horizontal forces was analyzed during different thickness of periodontal membranes around abutments.
分别在垂直载荷和斜向载荷下观察下颌第一磨牙磨牙半切术后不同固定修复设计对牙周支持组织应力分布情况。
The stress distribution of the reserved root with different prosthodontic design after hemisection therapy under the vertical loading and obliquely loading was observed.
在单循环载荷时，三组固定方式在内固定失效的最大载荷及线性固定钢度无显著性差异。
No significant differences between the three fixation groups were observed in the parameters maximum load to failure and linear fixation stiffness with monocyclic loading.
本研究从固定式三油楔动压滑动轴承动态工作状况分析入手，分析了固定三油楔动压滑动轴承的原理以及变载荷工况下的受力状态；
The thesis come from the analysis of stationary type tri-oil wedge dynamic-pressure sliding bearing dynamic working condition, analyse its elements and stress in variable-load operating mode.
在相同轴向压缩载荷作用下，AFC组椎弓根钉受力移位较内固定组明显减小。
Under the same axial compression load, the dislocation of the pedicle screw in AFC group was apparently less than that in fixation group.
最后由加权积分法给出均布载荷作用下周边固定和周边不动简支圆板的解析数值结果。
The analytical numerical results for circular plates of clamped and immovable simply supported edges, under uniform distributed load, are presented by using the method of weighted residuals.
从应力分布情况来看，前后联合内固定方式更加符合载荷分布原则。
From stress distribution, the anterior combined with posterior approach was corresponding with the principle of load-sharing.
用电测法对外周边固定、内周自由、受均布载荷的环板进行实验应力分析。
Expcrimental stress analysis by electrical measuring method was carried on the ring plate with fixed outer perimeter, free inter perimeter and received even load.
夹板固定是以固定带、夹板、纸压垫、牵引等装置所组成的局部外固定力学系统，固定带的约束力是夹板固定骨折的动力来源和外载荷。
Splint fixation is an external fixation system, composed of retainer, splint, paper pad and traction. Pressure under retainer is the power source of splint fixation in treatment of fractures.
给出了以自由界面的运载火箭模态参数和自由界面或固定界面有效载荷模态参数构成的耦合频响函数表达式。利用耦台频响函数可以进行不同有效载荷的界面加速度响应之间的转换。
The expressions of coupling FRFs which are formed by the modal parameters of launch vehicle with free interface and of payload with free interface or fixed interface are given.
根据国际汽联的标准8853/98，安全带的每个固定点必须能够承受14.7千牛顿的载荷，大约相当于1，470公斤的重量。
According to the FIA standard 8853/98, every fastening point of the belts must be able to withstand a load of 14.7 kilonewtons, the equivalent of roughly 1,470 kilograms.
根据国际汽联的标准8853/98，安全带的每个固定点必须能够承受14.7千牛顿的载荷，大约相当于1，470公斤的重量。
According to the FIA standard 8853/98, every fastening point of the belts must be able to withstand a load of 14.7 kilonewtons, the equivalent of roughly 1,470 kilograms.
应用推荐