结果表明:多重固溶时效热处理可以显著提高合金的塑性和断裂韧度,而对强度的影响不大。
The results showed that multiple solution and aging treatment had a significant effect on increasing plastic property and fracture toughness, although had little effect on strength.
这也从分形理论的角度证明了在超塑性固相焊接头的形成过程中,焊接面各微区的焊合状态是非均匀性的。
It is proved by fractal theory that the welded state of every micro zone at welded surface is uneven in the formation process of isothermal superplastic solid-state welding joint.
综述了近年来热固、热塑性聚合物反应加工过程中的化学流变学模拟进展。
In this paper, the advances in chemorheological modeling of reactive processing for thermoplastics and thermosets were reviewed.
采用适当固溶温度处理,该二合金晶粒度适中,可获得强度、塑性和抗热疲劳性能较好的配合。
By proper solution treatment the grain size of alloys was moderate, thus a good combination of strength, plasticity and the resistance to thermal fatigue was obtained.
它们是热塑性涂料,当它和氨基树脂结合时,也可达到热固涂料的某些特性。
These are thermoplastic coatings, but may approach the performance of thermosetting coatings by the incorporation of amino resins.
本文将奇异函数法应用于结构的塑性极限分析,简化计算某些固支环形板的极限荷载。
In this paper, the method of singularity function is applied to the structural plastic limit analysis, and simplified the calculation of limit loads of some annular plates of fixed supports.
而粗大的晶粒及连续的晶界容易产生应力集中,因此合金经固溶时效后具有较低的塑性和冲击值。
However, large grain size and continuous grain boundaries combine to produce stress concentrations, thus lowering the plasticity and impact value of alloy after solution and aging treatment.
处于最佳分散状态的白色颜料分散液是一种假塑性流体,分散液粘度和剪切速率及分散液固含量三者关系可用函数式表达。
The pigment in this state exists as a pseudo-plastic fluid, whose viscosity, shear rate and solid contents can be related through a functional expression.
随固溶时间缩短, 不锈钢的强度、硬度提高,塑性增加;
The strength, hardness and plastic increase with the decrease of solid solution time.
为适合小井眼、小间隙井的固井要求,研究了复合塑性降滤失剂PT—2体系。
To meet the requirements of well cementing fors mall borehole and small annular space, the composite plastic fluid loss additive PT-2 was studied.
结果表明,随着S含量的增加,导致固液两相区、温度范围和偏析程度明显加大,引起合金的热塑性降低。
The results showed that the solid liquid phase zone, temperature interval and segregation degree may be obviously enlarged with increasing s content so as to reduce the hot plasticity of the alloy.
固溶后合金的强度较低,但塑性最好;
The alloy has lower intensity after solution treatment, but the plastic is best.
后续再结晶处理可以在保持固溶态合金强度的同时大幅度提高其塑性。
The plasticity can be enhanced by post recrystallization, keeping the strength of solid-solution state at the same time.
戴安娜MB-2660是一种塑料涂料用的固含100%的热塑性丙稀酸树脂,例如可以用ABS,PS和PVC底材上。
DIANAL MB-2660 is a thermoplastic acrylic resin for use in plastic coatings, for example ABS, PS and PVC.
实验表明:半固态浆料模锻成形的变形方式是不同的,不同的固相率下其固液两相的塑性流动机制也是不同的;
The experiment showed that the mode of deformation and the plastic flow mechanism of solid and liquid phase under different solid phase ratio were different;
运用双剪统一屈服准则,对线性荷载的两种不同分布形式作用下的固支圆板进行了弹塑性分析,分别得出了相应的统一解形式。
A unified solution of plastic limit of simply supported circular plates subjected to border uniform distributed loading is presented based on the Twin Shear unified Yield Criterion.
该合金在固溶处理后塑性良好,易于辗压及加工成型各种形状复杂的零件;
The alloys in plastic after solution treatment good, easy Rolling and Processing of the various parts of complex shape;
在黑油模型和弹塑性有限元程序的基础上,编制了计算低渗透油藏流-固耦合渗流的计算软件。
The calculation program of oil seepage is designed on the basis of black oil model. The calculation program deformation is designed according to the elastoplastic FEM program.
塑料制品压制成型分为热固材料的成型和热塑性材料的成型。
Press forming of plastic products can be classified into thermosetting material forming and thermoplastic material forming. For example, bakelite of electric appliance industry.
叶片表面的再结晶在叶片使用之前就已存在,是由于固溶热处理前叶片的表面存在塑性变形,在固溶热处理过程中形成的。
Owing to the plastic deformation on the blade surface, recrystallization formed on the solid solution heat treatment. Before blade application, recrystallization zone existed already on its two sid…
叶片表面的再结晶在叶片使用之前就已存在,是由于固溶热处理前叶片的表面存在塑性变形,在固溶热处理过程中形成的。
Owing to the plastic deformation on the blade surface, recrystallization formed on the solid solution heat treatment. Before blade application, recrystallization zone existed already on its two sid…
应用推荐