它们在固化过程中收缩较大或体积减少较多。
They also undergo a high shrinkage or reduction in volume during solidification.
研究了硅灰石硅溶胶浆体的固化过程及机理。
The process and mechanism of solidification of wollastonite silica sol slurry are studied.
讲述了钢固化过程中的，显微偏析现象模型。
Simple Model of Microsegregat on during Solidification of Steels. pdf. pdf.
对固化过程和固化物性能的影响因素作了考察。
The effects of some factors on the properties and curing course were studied.
MDI的类别对产物的固化过程有重要的影响。
结果表明：两种情况下，稠油固化过程基本相同。
The results show that the heavy oil curing process is basically the same in both cases.
所以本文重点研究了涂料在固化过程中氧阻聚的抑制。
So the restraining of the oxygen inhibition in the solidifying process was investigated in detail in this paper.
固化过程是操纵根据类型的烟草，和想要的颜色的叶子。
The curing process is manipulated based upon the type of tobacco, and the desired color of the leaf.
建立了胶合板的材料模型，以研究热压固化过程中材料性能的改变。
Material model of plywood is established to study change of material property in hot-pressing consolidation process.
在固化过程发生相分离，两相的玻璃化转变温度主要取决于固化条件。
Phase separation occurs during cure processes. The glass transition temperatures depend mainly upon the cure conditions.
研究了空气湿度对双组分聚氨酯灌封胶固化过程内部产生气泡的影响。
The effect of air-humidity on bubble of the cured two-component polyurethane was studied.
应用扭辫分析法跟踪固化过程，讨论了影响氨基醇酸树脂力学性能的因素。
The curing process was followed by torsion-braid analysis. The factors affecting the mechanical properties of amino-alkyd resin have been discussed.
大体积混凝土在固化过程释放的水化热会产生较大的温度变化和收缩作用。
Releasing steam heat from the mass concrete structures while solidifying leads to produce the temperature change and contraction.
SEM 分析表明，固化过程中析出了橡胶相并均匀分散在环氧树脂基体中。
SEM micrographs present the phase separation, and the rubber particles precipitate and distribute well in epoxy matrix.
为了达到一个快速固化过程，直接将微波能量作用于需要进行光学粘合的地方。
To achieve a fast curing process, we deposit microwave energy to the spot where optical bonding is desired.
为避免盐渍土在固化过程中可能发生的体积变形危害，研究其自生体积稳定性。
The autogenous volumetric stability of solidified saline soils was investigated to prevent damage to roads caused by volume changes of the road foundations.
以生物可降解的形状记忆聚合物为原料，经成型固化过程得到所需规格的缝合线。
Taking a biodegradable shape memory polymer as the raw material, the suture with required specification is obtained through molding and curing process.
实验表明，该监测系统能够准确地反映监测点处树脂流动前锋的到达及其固化过程。
The experiments indicate that the monitoring system can precisely reflect the resin flow front arrival and curing course of resin on the inspecting spot.
对于给定的层状平面结构，将粘接层的固化过程用于模拟粘接层界面强度的变化过程。
For a given layered planar structure, we use the solidifying process of the adhesive layer to simulate the change process of interface strength of the adhesive joint.
为了确定快速成型中树脂固化线条的理论模型，对扫描动作和固化过程进行了详细分析。
To determine the theoretical model of curing resin line in rapid prototyping, the scanning motion and curing process are particularly analyzed.
文中应用总放热系数等效考虑了CFRP压力容器固化过程中热压釜辐射与对流边界条件。
General heat release coefficient is used to equivalently consider autoclave radiation and convection of boundary condition during curing process for CFRP pressure vessel.
研究影响热固化过程的因素（分子量、炔基含量、羟甲基含量）和典型树脂的固化动力学。
The effects of molecular weights, ethynyl contents and methylol contents on thermal cure and cure kinetics of typical propargyl resins are also reviewed.
对环氧乙烯基酯树脂的分类、合成和固化作了叙述，并与普通不饱和聚酯固化过程进行了比较。
In this lecture, classification, synthesis and curing of epoxy vinyl ester were related and the curing behavior of this resin was compared with that of common unsaturated polyester resin.
结果表明热固性酚醛树脂的固化过程，首先是羟甲基发生缩合反应，缩合反应形成醚键是主要的。
It was shown that the curing process of resoles, at first, proceeded by condensation reaction of methylol groups, and the formation of dimethylene ether linkage was predominant.
球粉汞齐的性能，诸如固化过程中的尺寸变化，压缩强度，流变及蠕变等均达到美国牙医协会技术指标。
The properties of the amalgams of spherical powders, such as dimension change during hardening, compressive strength, flow and creep meet the specification No.
三更环保：光固化工艺地板干燥固化过程采用各种射线照射，通过高温来干燥漆面，可能产生有害物质；
More green: Paint of floorings that use UV craft is dried by radial light. It will have injurants because of high temperature drying craft.
从热力学、传质动力学、相分离机制和固化过程几方面综述了浸入凝胶过程中聚合物膜形成机理的研究现状。
The mechanism for membrane formation by immersion precipitation processes was reviewed based on the thermodynamics, mass transfer dynamics, mechanism of phase separation and gelation process.
采用低毒的N羟甲基丙烯酰胺体系凝胶注模成型氧化铝陶瓷，研究了该体系下浓悬浮体的制备及固化过程。
The alumina ceramics is gel-mould cast with low toxic N methylolacrylamide system. This paper reports the investigation on the preparation of alumina suspension and its solidification process.
讨论了预聚温度、 催化剂等对大分子单体制备的影响，且对大分子单体与苯乙烯共聚的固化过程进行了探讨。
The influence of several factors on the preparation of the macromer was studied. In addition, the curing behavior of the macromer with styrene was al…
树脂传递模塑工艺的固化过程数值模拟有助于化学反应、材料结构与性能的控制，具有重要的科学意义和工程价值。
The numerical simulation of curing processes in resin transfer molding is helpful to control the chemical reaction, material structures and properties.
应用推荐