提出一种基于光固化法的隐形牙齿矫治器的制作技术。
A technology of the concealed teeth correcting equipment is developed.
冀东油田废水池地处环境敏感区域，对其废污泥采用固化法进行处理。
Considering the waste sludge pools in Jidong oil field are located inthe environment sensitive region, solidification method is applied to dispose the sludge.
若将此处理法同其它方法相结合，如坑内密封法、固化法等相结合会得到更满意的环保效果。
If combining the method with others, like the method of sealing it in the pit and solidification, better environmental protection result will be achieved.
固化法是将污染土壤同凝固剂或者粘合剂混合，固化为颗粒或块状，对于重金属污染的土壤效果好。
The solidification method is to mix the polluted soil with coagulant or adhesive to solidify it into particles or pieces and therefore efficient for the soil polluted by heavy metals.
该文较系统研究并比较了包括真空冷冻干燥法、水浴固化法和喷雾干燥法在内的几种固体蜂蜜制备工艺。
In this paper, several kinds of technology including vacuum freeze drying, water-bath solidifying, spray drying, and their condition were studied to prepare for solid honey.
深层搅拌法是以水泥作固化剂，通过专用的深层搅拌机械，在地基深部就地将土和水泥搅拌而成加固体；
The soil and cement are mixed into a solidified body in the deep level of the foundation by special purposed deep mixer with cement as the solidifying agent.
含有加捻纤维束的复合材料由于固化而产生的热残余应力问题，可以用能量法获得解答。
The problem of residual thermal stresses in the composites containing twisted fiber bundles due to curing can be solved in energy method.
用动力学扭辫分析(tba)法研究了水溶性丙烯酸酯树脂与六甲氧基甲基三聚氰胺的固化反应。
The curing reaction of waterborne acrylic resin with HMMM has been studied by using the torsional braid analysis (TBA).
酶电极法血糖仪是采用酶的固化技术以及电检测的方法研制而成的。
The enzyme electrode based blood glucose meter is developed by the technology of immobilizing enzyme on pole and detecting resultant electrical current.
利用外推法，确定了参考固化工艺温度。
The referenced curing processing temperature were calculated by Extrapolation.
本文以差热扫描量热法（DSC）分别研究了脲醛（UF）胶、聚异氰酸酯（PMDI）胶以及它们的混合液的加热固化过程。
The curing processes of urea-formaldehyde(UF) resin, polydiphenylmethane diisocyanate (PMDI) and their mixtures were examined respectively by differential scanning calorimetry (DSC).
采用凝胶转化率曲线法和表干时间法，从MI的结构和浓度、活性稀释剂、助剂和树脂等方面对MI引发的光固化进行了研究。
The effects of MI structure and concentration, reactive diluents, additives and resins on photo curing initiated by MI were studied by the gel conversion and photo-curing rate.
利用红外光谱、差示扫描量热法分析技术对改性树脂的结构及固化反应过程进行了研究。
The structure and curing of the modified phenol resin were investigated by means of IR spectra and DSC methods.
运用示差扫描量热(dsc)法研究了邻苯二甲酸二烯丙基酯(DAP)树脂的固化反应历程。
Curing reactions of diallyl phthalate (DAP) resin were studied by differential scanning calorimetry (DSC).
若使用旋涂法，就是在金属膜的上面旋涂一层UV树脂并用UV固化。
If the spin coating method is used, a UV-resin is spun on top of the metal film and cured by UV-exposure.
本文以凝胶化理论为依据，应用扭辫分析和红外光谱分析法，讨论了氨基醇酸树脂固化过程中氨基树脂的自交联行为。
The self-curing of amino resin during the curing process of amino-alkyd resin has been studied based on gelation theory by using the IR and torsion braid analysis.
合成了不饱和聚酯多元醇，进而采用化学共混法合成了室温固化的聚氨酯聚苯乙烯共混物。
The room temperature curing polyurethane-polystyrene blends were synthesized with a synthesized unsaturated polyester-polyol by chemical blending method.
本文介绍了介电分析法在热固性树脂及以其为基体的涂料和纤维增强复合材料固化研究中的应用。
The paper reviewed the use of dielectric analysis to study the curing process of thermosetting matrix system including organic coatings and composites.
应用扭辫分析法跟踪固化过程，讨论了影响氨基醇酸树脂力学性能的因素。
The curing process was followed by torsion-braid analysis. The factors affecting the mechanical properties of amino-alkyd resin have been discussed.
采用二步法，研制成重防腐粉末涂料用的环氧树脂及固化剂，其主要性能指标达到国外同类产品水平。
By use of two-step process, an epoxy resin and hardener for heavy duty powder coatings have been developed, the main technical specifications reached the similar standard of products abroad.
采用非等温差示扫描量热法(dsc)研究了一种长侧链取代液晶环氧单体与甲基六氢苯酐的固化反应历程，考察了体系的固化反应动力学特征。
A liquid crystalline epoxy monomer with long lateral substituent was cured with anhydride and the cure kinetics was investigated by non-isothermal DSC technique.
该涂层可采用浸渍法和涂刷法获得，并且坯体在涂覆涂层前，需清洁然后采用热水固化处理。
The coating is easily applied by dipping or brushing and cleans up prior to curing with warm water.
实验结果表明，用DSC法可较准确地预示未固化推进剂的燃速，并成功预示了某配方的基础燃速。
The results of tests show that the burning rates of uncured propellants can be predicated exactly with DSC method and the base burning rate of some formulation is predicated successfully.
同时将产物用于紫外光固化涂料配方，并用动态红外光谱法观察了产物的紫外光固化行为。
By ir spectra, the UV curing kinetics were also studied. With the product, after UV light irradiation, paint obtained has perfect characteristic.
用红外光谱法研究了四种热固性酚醛树脂在固化过程中的化学变化。
The chemical change of four resole type phenol-formaldehyde resins in curing process was studied by infra-red spectroscopy.
DS C曲线显示该树脂的固化能与熔融法得到的基体树脂有所不同。该树脂固化后有良好的热稳定性。
The curing property of the resin was found to be a little different from that made by melting copolymerization according to the DSC curve, and the cured resins had good heat stability.
为研究硫醇烯光固化组成物的反应机理，选用安息香双甲醚、安息香乙醚、安息香正丁醚、二苯甲酮和噻吨酮为光敏剂，用红外光谱法研究了硫醇烯的光化学反应动力学。
The kinetics of thiol-ene reaction is studied by Fourier Transform Infrared when benzoin dimethyl ether, benzoin ethyl ether, benzoin butyl ether, benzophenone and ITX were used as photosensitizer.
文中采用差示扫描量热法(dsc)对api胶粘剂的固化机理进行了研究。
The adhesion mechanism between Aqueous Polymer Isocyanate (API) adhesive and bamboo was studied by means of Dynamic Mechanical Analysis (DSC).
文中采用差示扫描量热法(dsc)对api胶粘剂的固化机理进行了研究。
The adhesion mechanism between Aqueous Polymer Isocyanate (API) adhesive and bamboo was studied by means of Dynamic Mechanical Analysis (DSC).
应用推荐