本课题用ANSYS软件对某大型氧化反应器流固耦合进行了有限元应力分析计算。
In this thesis, stress analysis and calculation for a large oxidized reactor considering are made by using ANSYS FEM code.
通过对结构与理想流体耦合问题的分析，利用有限元方法对流固耦合系统动力响应进行了研究。
Through analysis of the coupling problem between structure and ideal liquid, some researches were done on the dynamic responses of solid liquid coupling system using FEM.
针对饱和土固结问题，利用可变形多孔介质中流体渗流的流固耦合有限元数值模型，对该问题进行了数值模拟。
The soil consolidation can be simulated by using a finite element numerical model of fluid-solid coupling of fluid seepage in a deformable porous medium.
应用原子参数人工神经网络方法研究了过渡元素二元合金相图中的有限固溶度问题。
Limited solid solubility of transition elements in binary alloy phase diagram is studied by (using) atomic parameters and artificial neural network.
分别采用有限差分法和有限元法对流固耦合流体渗流数学模型与岩石变形数学模型进行了求解。
The mathematical model of fluid percolation and rock deformation of fluid-solid coupling is solved with the finite difference method and the finite element method respectively.
利用电导实验技术，在线跟踪观察吸附质在固-液吸附二元体系中的行为。
The behavior of adsorbate in solid-liquid adsorption system was observed on-line, by the experimental technology of conduction.
尝试用有限元分析的方法模拟TLD中流体与结构的耦合作用，并验证了由此方法建立起来的流固耦合模型的可靠性；
Finite element method is used to carry on numerical simulation of fluid-structure interaction for the system of TLD, and a verification of the reliability of fluid-structure coupled mode is made.
结果：在老年组，神经元固缩、核糖体解聚、胞浆内出现大量脂滴及脂褐素颗粒、染色质凝聚。
Results: For the neuron, we can find pyknosis of neuron, depolymerization of ribosome, accumulation of lipid droplets and lipofuscin, condensation of chromatin.
液体压强矩阵方程和压电硅片振动有限元方程耦合，得到一个包含微泵进出口扩散管的液-固耦合系统振动方程。
The fluid pressure equation is combined with vibration equation of silicon diaphragm to construct liquid-solid coupling system equations for a micropump.
利用有限元模拟试验建立了加工误差、铣削力、固持工艺参数之间的关系模型，并对固持工艺参数进行优化分析。
A finite element model that reflects the relations among machining errors, machining forces and clamping parameters was built, and the clamping parameters were optimized.
建立了考虑槽身和槽内水体流固耦合的渡槽薄壁结构梁段有限元动力分析模型。
The seismic response analysis model of thin wall space aqueduct with fluid-structure coupling is established.
利用改进的准正规模型，根据热力学理论获得了决定二元液-固相平衡的曲线方程。
Using the revised quasiregular model, we obtained the equations of the liquid-solid phase equilibrium curves of a binary system according to thermodynamic theory.
本文给出了流固偶合运动（包括物体散射辐射及偶合运动）的边界元法理论和应用。
This paper presents a boundary element method for coupled motion analysis of fluid and solid.
该系列溶解度数据的测定为溶剂法分离回收混合二元酸的工业化生产提供了基础数据，也为相关固液相平衡研究奠定了基础。
These datas lay a foundation for the separation and recovery of mixed dibasic acids by solvent method and related solid-liquid phase equilibrium research.
对南京奥体中心中央大平台梁柱固接即形成框架的情况建立有限元模型，分析其在温度及收缩作用下的内力分布情况。
The finite element model of Nanjing Olympic Center is created, and the distribution of internal force under temperature and shrinkage load is analyzed.
在理论分析的基础上，编制了有限元程序，并对固支梁进行了验算。
Based on the theoretical analysis, the finite element analysis program is developed and examined through the analysis of a fixed beam.
针对气动喷嘴阵列喷气再现线面触觉问题，建立手指皮肤和喷嘴的流固耦合有限元模型。
In view of the line and surface tactility displayed by the pneumatic nozzle array, a fluid-structure coupled finite element model of the finger skin and nozzle was established.
编制了流体有限元自动生成程序，使得流固耦合问题从建立模型到分析能够利用计算机自动实现。
The structure-liquid coupling vibration problem can be solved automatically by the auto-generating liquid finite element program.
基于变密度拓扑优化方法和声-结构耦合系统有限元模型，对四角固支箱体模拟的飞机座舱进行了减振降噪分析。
The structural topology optimization method—variable density method is used to optimize the topology of an acoustic_box for interior sound pressure reduction.
应用热弹塑性有限元法对液力变矩器点固焊过程夹持力和焊接变形进行全面分析，定量得出了焊接预留间隙，为夹具设计提供了依据。
According to the analysis results, pre-welding gap was gained quantitatively, which can be regarded as warrants and references for the design of welding clamps.
在固液反应球磨过程中，三元合金产物的元素摩尔比接近于二元母合金中的元素摩尔比；
The atom ratio of the ternary alloy was close to that of the binary alloy.
根据流体力学和弹性力学建立了轴流泵的流-固耦合有限元方程。
According to the hydromechanics and the elasticity theory established axial flow pump's fluid - solid coupling finite element equation.
在以上研究的基础上，在固桩架有限元模型的建立过程中灵活地结合运用了两种体—壳连接的方法。
And based on the research result, two kinds of solid-shell connecting methods are utilized and combined in modeling the jacking frame.
基于流体的波动方程和结构的动力方程，利用有限元方法研究了考虑流固耦合时的双层加肋圆柱壳体的振动特性。
Based on the acoustic wave equation and structural motion equation, the vibration characteristics from the fluid loaded stiffened cylindrical double shell are studied by using finite element method.
本文把有限元法与边界元法相结合来计算水轮机部件流固耦合振动问题。
In this paper, fluid_solid coupling vibration of hydraulic_turbines is calculated using coupled FEM and BEM.
将瞬态分析的流固耦合有限元模型应用于上海虹桥枢纽多级梯次基坑计算中，参照设计方案，对降水、开挖、支护等一系列工况进行模拟。
The transient analysis model is applied to the Shanghai Hongqiao transport hub's multi-echelon excavation project, the dewatering and excavation process were simulated based on the practical work.
在有限元离散的基础上，基于FEPG系统自主开发了疏松砂岩油藏单相及两相渗流流固耦合有限元程序。
On the base of discrete equations, the fluid-solid coupling finite element programs for single phase flow and two phase flow in unconsolidated sandstone reservoir were developed with FEPG.
本文提出了流固耦合温度场的有限元法，并用于湿式离合器摩擦片的温度场计算。
In the paper a finite element formulation is presented for the fluid-solid integrated temperature fields. It is used in analyzing temperature fields in the friction discs of a wet clutch.
在黑油模型和弹塑性有限元程序的基础上，编制了计算低渗透油藏流-固耦合渗流的计算软件。
The calculation program of oil seepage is designed on the basis of black oil model. The calculation program deformation is designed according to the elastoplastic FEM program.
在黑油模型和弹塑性有限元程序的基础上，编制了计算低渗透油藏流-固耦合渗流的计算软件。
The calculation program of oil seepage is designed on the basis of black oil model. The calculation program deformation is designed according to the elastoplastic FEM program.
应用推荐