对喷雾干燥粘壁的类型和原因进行了分析。
The types and reasons for wall sticking during spray drying were analysed.
喷雾干燥的雾矩和雾滴颗粒直径可略作调整。
The fog moment and fog droplet of spray-drying can be slightly adjusted.
给出了喷雾干燥法制备超细粉末的应用前景。
The foreground of preparation ultrafine powder by spraying drying was gived.
目的硫酸氨基葡萄糖喷雾干燥后稳定性试验。
Objective To study the stability of glucosamine sulfate prepared by spray drying.
银杏磨浆后经淀粉酶适度水解喷雾干燥最后得到产品。
The grinded ginkgo fruit was hydrolyzed partially by starch enzyme and then the paste was spray dried.
纳滤、浓缩、喷雾干燥得到低脂蛋白质和碳水化合物。
Low fat protein and carbohydrate were obtained through nano filtration, concentrating and drying.
研究了用喷雾干燥法制备酯型儿茶素微胶囊的生产工艺。
The preparation techniques of esters-catechin microcapsule by spray-drying were investigated in this paper.
喷雾干燥是液体工艺成形和干燥工业中最广泛应用的工艺。
Spray drying is a liquid process shaping and drying industry, the most widely used process.
喷雾干燥粉料成型性与其团聚态结构和强度有着密切关系。
Moulding characteristic of SD powder has a close relation with the structural state and the strength of agglomerates.
目的：研究玻璃化转变对中药喷雾干燥过程和产品质量的影响。
Objective: To research the effects of glass transition on the processing and quality of Traditional Chinese medicine spray drying.
建立以年总费用为目标函数的逆流喷雾干燥优化设计数学模型。
The optimum design model of countercurrent spray dryer is established with the annual total cost as the objective function.
需要检验每两周一次翻转一次，如果沙子和喷雾干燥可能是适当的。
Require inspection once every two weeks flipping once, if the sand and spray drying may be appropriate.
模拟结果表明脉动气流喷雾干燥具有干燥时间短，蒸发速度大等特点。
The simulation results show that the short drying time and large evaporation rate are characteristics of the pulsating spray drying.
高粘度糊液不宜使用喷雾干燥法，且这种制法成本较高，一般很少采用。
High viscosity paste should not use spray drying method, and the cost of this method is high, generally use.
方法采用喷雾干燥法，研究并考察低糖型丹桂香颗粒的吸湿性和流动性。
Method Prepareing technology of low-sugar Danguixiang granule on spraying dry law, and investigating hygroscopicity and mobility of lew-sugar Danguixiang granule.
喷雾干燥技术的热干燥机理十分复杂，机理的研究一般采用实验的方法。
The thermo mechanism of spray drying technology is rather complex and generally studied by experiments.
以龙眼为原料，研究了加工过程中龙眼汁酸化和浓缩对龙眼喷雾干燥的影响。
The effect of acidification and concentration of longan juice on spray drying longan powder was studied.
目的对风热感冒提取液喷雾干燥时的条件进行筛选和改进，寻求最佳工艺条件。
OBJECTIVE To screen and improve spray drying condition for the extract and obtain the best process.
聚氯化铝是通过喷雾干燥工艺加工而成。因此也可叫高效级喷雾干燥聚合氯化铝。
Poly aluminum chloride is processed through the spray drying process, so it is also called the high efficiency spray drying of the aluminum chloride.
石灰浆雾化喷嘴是喷雾干燥烟气脱硫装置的核心部件，对烟气脱硫有着重要的影响。
The lime white spray nozzle is the core part of drying haze desulphurization installment, which has the significant influence to the haze desulphurization.
应用包括：尘埃控制、喷雾干燥、加湿、气味控制、产品涂层、产品冷却和气体冷却。
Applications include: Dust control, spray drying, humidification, odor control, product coating, product cooling, and gas cooling.
通过控制适当的工艺参数，采用喷雾干燥法成功制备了VAE类可再分散聚合物粉末。
One kind of VAE redispersible polymer powders were prepared by the method of spray drying with fit technical parameters.
目的：考察喷雾干燥工艺对乌药鞣质微囊防潮效果的影响，并研究了造成影响的机制。
Objective: the influence of spray drying technology on the damp proof effect of microcapsules and the mechanism were studied.
除此之外，用喷雾干燥产品可保证安全性，减少水事故，对居民饮用水非常安全可靠。
In addition, the use of spray drying products can ensure safety, reduce water accidents, the residents of drinking water is very safe and reliable.
介绍了大量连续生产农用有机稀土添加剂的喷雾干燥系统及关键部件雾化器和喷嘴结构。
The spray dying system in continuous mass production for the agricultural use and the structures of the key components-atomizer and spray nozzle wer introduced.
结果表明：经过喷雾干燥处理过的偏钨酸铵粉末颗粒呈球壳状，粉末体孔隙率高达71。
The results show that the AMT powder with a special spherical shell structure exhibiting a high porosity of 71.
以偏钨酸氨为原料，采用喷雾干燥、焙烧、球磨和纯氨氮化工艺进行了氮化钨粉体制备研究。
Nanometer tungsten nitride powders were synthesized as amm onium metatungstate by means of spray drying, calcination, milling and nitration in pure ammonia.
研究了喷雾干燥法制备高包埋率微胶囊化二丁基羟基甲苯(BHT)的壁材组成及工艺条件。
The composition of wall materials and the technology of spray -drying for the butylated hydroxy toluene (BHT) microencapsulation were studied.
本文结合喷动床流态化技术和喷雾干燥法提出了一种新型喷雾—喷动床半干法烟气脱硫系统。
A new semi-dry desulfurization technique using spray spouted bed was proposed which connected with fluidization of spouted bed and spray-drying technique.
本文结合喷动床流态化技术和喷雾干燥法提出了一种新型喷雾—喷动床半干法烟气脱硫系统。
A new semi-dry desulfurization technique using spray spouted bed was proposed which connected with fluidization of spouted bed and spray-drying technique.
应用推荐