介绍了镍基耐磨合金喷焊层的性能。
Introducing the performance of spraying welding layer for nickel wearing resistance alloy.
热喷焊在设备维修中得到了广泛的应用。
The spray weld is used widely in maintenance and repair of the mechanical equipment.
铸铁件的喷焊，如玻璃模具，汽缸、导轨。
Spray-fusing of cast iron parts, such as die for glass, cylinder, and guide.
铸铁件的喷焊，如玻璃模具，汽缸、导轨。
F103 Spray-fusing of cast iron parts, such as die for glass, cylinder, and guide.
详细介绍了喷焊辊子的结构、生产工艺流程。
The structure and production process flow of spray welding rollers have been introduced in detail.
采用喷焊技术在低碳钢表面获得合金熔覆层。
A new alloy overlay was prepared by spraying-welding technique on low carbon steel surface.
结果表明，该喷焊层具有良好的耐高温磨损性能。
Results showed that the spray welded layer had better high temperature wear resistance.
结果表明，喷焊层与基体是冶金结合，结合线清晰。
The result shows that the bond between surfacing weld and base metal is metallurgical bond, and bond line is clear.
试验结果表明，喷焊层质量符合产品设计使用要求。
The test results show that the quality of spray weld coat accords with the demands of design and usage.
将氧-乙炔粉末喷焊技术用于渣浆阀耐磨表面的强化。
In this paper, the oxyacetylene flame alloying powder spraying technology was used to strengthen the wear-proof surface of slurry valve.
抗强烈磨粒磨损，无需加工场合的喷焊，如挖泥船耙齿。
Spray-fusing of parts resistance to strong grain-wear free machining, such as harrow teeth of dredger.
抗强烈磨粒磨损，无需加工场合的喷焊，如挖泥船耙齿。
Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger.
合金粉末表面热喷焊技术是一种新的表面防护和强化工艺。
Surface thermal spray weld process with alloy powder is a new technology of surface protecting and hardening.
一种小型的射吸式喷砂枪，可用作喷涂喷焊前的表面清洁毛化处理。
A mini-sized sand-blasting gun of ejection-and absorption type, used to clean and roughen the metallic surfaces for thermal spraying.
论述了内孔喷焊装置的设计原则，并提出了两种规格机筒喷焊的最佳规范。
The principles to designed the hole used plasma gun is discussed and two kind of spraying welding procedures are put forward.
本文介绍了等离子弧喷焊的工艺过程及采用PC控制的硬件接口和软件编程。
The technique process of plasma spray and its PC hardware interface and software program are introduced in this paper.
得到了镍基喷焊层元素熔入量对奥氏体焊缝显微组织及裂纹敏感性的影响规律。
The influencing rules of the content of alloy elements in nickel-base spraying layer on the microstructure of austenite weld and the crack sensitivity were found.
通过在镍基自熔合金粉末中添加微量稀土，研究了稀土对喷焊层性能的影响规律。
The influential regulation of rare earth on the properties of spray coating is studied by adding rare earth to the self - fluxing Nickel based alloys powder.
当需要喷涂或喷焊时，关闭高压氧阀，打开送粉阀(4)，热喷涂装置即可工作。
When objects require spray coating or spray welding, the user can close the high-pressure oxygen gas valve and open the powder feeding valve (4), so the hot spray device can work.
此外，提出了一种新的梯度材料制备方法——等离子喷焊法，分析了该法的特点。
In addition, a new method-the plasma welding is presented, and the characteristics of the method is analyzed.
研究了喷焊工艺对喷焊层质量的影响规律，提出了改善喷焊层质量的方法和措施。
Through the research on the effect of spraying process on the quality of overlay, the method to improve the spraying quality was proposed.
采用可编程控制器(P LC)控制有助于提高三偏心蝶阀喷焊质量与系统稳定性。
Applying PLC to the plasma spray welding system was helpful for enhancing the quality of triple eccentric butterfly valve and the system stability.
通过工艺试验、耐磨试验和显微组织观察分析，研究了氧-乙炔火焰喷焊层的常规性能。
Through the process test, wearing test and microstructure observation and analysis, the convention performance of oxygen-acetylene flame spray welded layer is studied.
粉末火焰喷涂喷焊设备。用惰性气体送粉，能得到更佳涂层品质，也可喷涂氧化物涂层。
Powder flame spray or spray fusing gun can be used with inert gas to feed powder with best coating effects and can also be used for spary of ceramic powder.
同时指出，为了提高喷焊层的耐蚀性，应综合考虑喷涂材料、重熔工艺、磨削工艺的影响。
And it is came out that, the corrosion resistance of spraying layer is affected by spraying material, spraying technology and grinding technology.
研制成功了一种新型铜基自熔性合金粉末，在高强度钢基体上采用等离子喷焊工艺制备焊层。
A newly developed self fusion Cu-based Cu-Ni-Sn alloy powder and the PTA coating technology are described.
研究了在耐酸不锈钢基体上采用激光熔覆和等离子喷焊两种工艺形成的涂层对耐腐蚀性的影响。
The effect of coating on anti corrosion has been studied, which is formed by laser cladding and plasma spurt welding on metal base of anti acid stainless steel.
等离子喷焊工艺过程复杂，对控制系统的可靠性要求高，采用PLC控制有助于提高喷焊质量。
The technical process of plasma spray welding is complex and requires the control system to have high reliability. PLC used in this system can enhance the quality of spray welding.
等离子喷焊工艺过程复杂，对控制系统的可靠性要求高，采用PLC控制有助于提高喷焊质量。
The technical process of plasma spray welding is complex and requires the control system to have high reliability. PLC used in this system can enhance the quality of spray welding.
应用推荐