热室用于压坯的脱脂、成份调整和烧结。
Its sintering chamber is used for defatting, adjustment of composition and sintering.
比较了这两种复合材料的结晶性能和烧结性能。
Sinterability and crystallization behavior of the two types of ferrite composites were compared.
由于微粒易于聚集和烧结，不得不降低操作温度。
The agglomeration and sintering of fine particles can necessitate a lowering in temperature of operation.
陶瓷元件是将仔细研磨的材料经过加压和烧结制成。
Ceramic elements are made by pressing and sintering finely powdered materials.
分析了烧结温度和烧结保温时间对压坯密度的影响。
Effect of sintering temperature and sintering holding time on green density was analyzed.
陶瓷元件是将仔细研磨的材料经过加压和烧结制成的。
Ceramic elements are made by pressing and sintering finely powdered materials.
金属粉与铬酐的质量比、甩液、烘干和烧结工艺参数。
These include mass ratio of metallic powder to chromium trioxide and technological parameters of paint throwing off, drying and sintering processes.
尖晶石相和其中的铁空位浓度随组成和烧结温度而变化。
The ferric vacancy concentration varies with composition and heating temperature.
本文探讨了成孔剂和烧结温度对钛酸铝多孔陶瓷性能的影响。
The effects of pore-forming materials and sintering temperature on the properties of porous aluminum titanate ceramics are investigated.
根据材料和烧结温度的不同，零件的密度在烧结过程中也会改变。
The density of the component can also change during sintering, depending on the materials and the sintering temperature.
提出了高炉在使用高碱度烧结矿时的碱度和烧结率组合的最佳值。
Moreover, the author also proposes an optimum apportion between basicity and percentage of sinter for the best possible.
粉末锻造零件通常不像冷挤压和烧结零件那样接近最终尺寸或形状。
Powder forged parts generally are not as close to final size or shape as cold pressed and sintered parts.
梳齿筛网主要用于冶金行业的炼铁厂和烧结厂的物料筛分振动设备上。
The hackle screens are mainly used in the shaking screen classification attachments that are in iron-smelting plants and sintering ones of metallurgical industry.
采用石墨炉原子吸收法，测定了铁矿石、球团矿和烧结矿中微量杂质砷。
It was reported that trace amounts of arsenic in iron ores, spherical ores and sintering ores were determined by GFAAS.
进行了回炉料经成型和烧结等工艺制备球形氨合成催化剂的实验室研究。
In this paper, the experiment results for a spherical ammonia catalyst prepared from remelt scrap are reported by using spheroidizer and sintering furnace.
讨论了粉末注射成形在粘结磁体生产中的应用和烧结磁体研究开发的现状。
The application of powder injection molding in the production of bonded magnets and sintered magnets were discussed.
在所有的影响因素中，WC总碳和烧结温度是影响合金性能的最重要因素。
Of all factors, WC general carbon and sintering temperature are the most important factors which have much effects on material performance.
主要介绍了纳米陶瓷的制备方法，包括纳米陶瓷粉体的制备、成型和烧结。
Methods for the preparation of nano-ceramics including the preparation, molding and sintering of nano-ceramic powders are introduced in the paper.
通过优化烧结时间和烧结温度等工艺参数，铬环靶材的烧结成本大大降低。
Through optimizing the process parameters including sintering time and sintering temperatures, the sintering costs of ring Cr-target are decreased greatly.
模型由炼铁系统总体模型和烧结过程子模型组成，二者均为非线性规划模型。
The model consists of two parts, the general model of ironmaking system and submodel of sintering process, both are nonlinear program model.
采用合理的成形工艺和烧结工艺，成功地解决了螺旋铣刀毛坯生产难的问题。
The problem related to the difficult to making screw milling cutter welding blank has been solved successfully by using suitable forming process and sintering process.
前言：采用石墨炉原子吸收法，测定了铁矿石、球团矿和烧结矿中微量杂质砷。
It was reported that trace amounts of arsenic in iron ores, spherical ores and sintering ores were determined by GFAAS.
试验和分析结果将为建立非等温烧结模型和烧结工艺参数的优化方法提供依据。
The experimental and analytical results make the reference for building the non-isothermal sintering model and for the optimization of sintering process parameters.
同样，悬臂式檐金属包钢结构和烧结多孔玻璃汇合而成的波浪也呈现着层层流动要素。
Similarly the cantilevered canopies of metal clad steel structure and fritted pattern glass merge the wave forms into a series of repeating flowing elements.
通过对首钢高炉和烧结过程环保现状的系统分析认为，高炉过程已基本达到较高的环保水平。
By systematical analysis of the ironmaking and sintering processes at Shougang Corp. it is shown that the level of environmental protection of ironmaking is quite high.
大规格超薄建筑陶瓷砖的研究和开发中的关键技术之一就是提高瓷坯的机械强度和烧结性能。
One of the key technologies in research and development of large-sized super-thin ceramic tile is to improve the mechanical strength and sintered properties of its body.
重点研究了球磨时间和烧结温度对烧结合金的密度、硬度、横向断裂强度和压缩强度的影响。
The effects of milling time and sintering temperature on density, hardness, transverse rupture strength and compressive strength were mainly studied.
在新的配矿条件下，研究了碱度对承钢钒钛磁铁烧结矿的强度、矿物结构和烧结过程的影响。
The influence of sinter basicity on quality, mineral structure and sintering process of vanadium-titanium magnetite was determined under the new raw material structure.
介绍酸性炉衬的配料成分，炉衬的修筑和烧结工艺，并对炉衬的使用和保养方法作了详细叙述。
The ingredients of acid furnace liner, liner building process and sintering process was introduced, and the method to put the liner into melting and its maintenance was also described in detail.
介绍酸性炉衬的配料成分，炉衬的修筑和烧结工艺，并对炉衬的使用和保养方法作了详细叙述。
The ingredients of acid furnace liner, liner building process and sintering process was introduced, and the method to put the liner into melting and its maintenance was also described in detail.
应用推荐