亚麻籽胶具有较好的起泡能力和泡沫稳定性。
Flaxseed gum showed good foam properties and foam stability.
并叙述了评价溶液起泡能力和泡沫稳定性手段的进展；
The progress in evaluation methods for foaming power and foam stability of solutions was described.
实验发现，常温下此类表面活性剂有很好的起泡能力和泡沫稳定性。
It is found that the anionic Geminis display good foaming performance at room temperature.
当水解程度在20%左右时，其水解产物的发泡力和泡沫稳定性为最佳。
When the degree of hydrolysis reach 20%, the foamability and foam stability of whey proteins hydrolysate got the best.
十六烷二甲基苯氧乙基溴化铵的乳化能力、起泡力和泡沫稳定性都比较弱，具有一定的消泡和抑泡作用。
The emulsibility, producing bubble ability and the foam stability for PDPB are weaker, and it has definite effect on disappeared and restrained bubbles.
在分析了影响合成过程、发泡剂发泡效率和泡沫稳定性因素的基础上，确定了上述两类发泡剂的最佳工艺合成条件。
The optimum condition for synthesizing the two type foaming agent was established based on the analysis of the factors which determine the synthesis process, foaming ability and the foam stability.
通过研究不同种类的油脂在植脂鲜奶油搅打过程中脂肪球的部分附聚、搅打时间、搅打起泡率和泡沫稳定性之间的关系。
This paper mainly studied the relationship between the oil type and cream whipping properties, such as partial coalescence, time, overrun and foams stability.
具体的说，已发现疏水蛋白能同时提供优越的泡沫体积稳定性和对泡沫粗化的抑制作用。
In particular, hydrophobins have been found to provide both excellent foam volume stability and inhibition of coarsening.
研究表明，影响三相泡沫稳定性的因素主要有颗粒大小、固体浓度和颗粒的疏水性。
The factors that influence the stability of three-phase foam, are the particle size of solid, solid concentration, hydrophobicity of particle and viscosity.
啤酒花用于啤酒酿造，在增加啤酒苦味的同时可改善啤酒的风味和提高啤酒的泡沫稳定性。
Hops used in beer brewing could add beer bitterness and improve beer taste and beer foam stability.
测定了浊点、表面张力、去污力、洗盘能力、起泡力、泡沫稳定性和抗灰尘沉积能力。
Cloud point values, surface tension, washing and dishwashing performance, foaming power, foaming stability indices, and anti-greying efficiency were determined.
文章研究了泡沫复合体系中发泡剂、稳泡剂和碱对复合体系稳定性的影响。
The paper studied the effect of different foamer, foam stabilizer and alkali on foam stability in foam combination system.
碳材料如石墨、碳纤维、碳泡沫和膨胀石墨，他们都具有高导热系数、低密度和良好的化学稳定性。
Carbon materials, including graphite, carbon fibre, carbon foam and expanded graphite possess the properties of high conductivity, low density and good chemical stability.
本文研究了起泡剂的复配、高分子化合物、醇类、酸浓度和温度对泡沫酸起泡能力及稳定性的影响。
The effect of the co-compounding ingredients of foamer, polymer and alcohol, the concentration of acid and temperature on foaming ability and stability of foam acid has been studied in this paper.
粘稠泡沫在对付大量水侵和有效改进岩屑携带能力方面的稳定性，进一步促进了欠平衡泡沫钻井的应用。
The stability of viscous foam in dealing with large water invasion and effectively improving solids carrying capacity further promotes the application of underbalanced foam drilling.
因此酚醛泡沫的热稳定性和阻燃性能明显优于聚氨酯泡沫。
Therefore, the flame retardancy and the thermal stability of phenolic foam are much better than those of PUF.
介绍了油墨粒子大小和气泡大小与数量及其形成的泡沫的稳定性等对浮选脱墨效率和浮选得率的影响。
The effects of the toner particle's size, bubble's size and numbers and the stability of froth on flotation efficiency and flotation yield were introduced in this paper.
在水泥的不同掺量和不同添加顺序的条件下分别拌和泡沫沥青混合料，并进行劈裂强度试验，分析水泥的添加对其水稳定性的影响。
Mix the foam asphalt mixture on the condition of different cement content and adding order, do splitting strength test and analyze the influence of the cement addition on its moisture sensitivity.
本文对泡沫洗井技术的核心问题：如何提高泡沫稳定性进行了系统的理论和实验室研究。
In the dissertation, systematic theory research and laboratory study is conducted to try to solve the kernel problem of foam hole-cleaning treatment: how to enhance the foam stability.
与单一乳化剂相比，不同乳化剂复配的复合乳化剂性能更佳，较低用量的复合乳化剂可以使植脂鲜奶油达到最佳的泡沫稳定性和理想的起发率及泡沫硬度，其最适HLB值为6～9。
Compared with using only one kind of emulsifier, the compound emulsifier have a better quality of foam stability, texture and flavor, and the best HLB is from 6 to 9.
研究了蔗糖酯化合物的其它物化性能如hlb值、乳化力、硬水稳定性和发泡力及泡沫稳定性与结构和产品组成的关系。
Some physiochemical properties of these compounds, such as HLB value, emulsifying power, stability in hard water, foamability and form stability were also investigated.
通过分析磨损率和抗压强度等性能，废尼龙的加入可以提高酚醛树脂和酚醛泡沫材料的韧性和热稳定性。
The tenacity and heat stability of and phenol formaldehyde foaming materials added by nylon, were enhanced based on analysis of wear rate and compressive strength.
通过分析磨损率和抗压强度等性能，废尼龙的加入可以提高酚醛树脂和酚醛泡沫材料的韧性和热稳定性。
The tenacity and heat stability of and phenol formaldehyde foaming materials added by nylon, were enhanced based on analysis of wear rate and compressive strength.
应用推荐