公司凭借良好商业信誉和对产品质量严格要求，成功地经营着以彩妆为主的产品。
With excellent business credit standing and high product quality, we produce cosmetic products on the makeup mainly more than two years. The brand JIAOER products are more and more perfect now.
随着连铸技术的进步和对产品质量要求的提高，结晶器锥度的优化设计已被越来越多的学者和生产者所关注。
With the advancement of the casting process and to meet the demand of the quality, more and more expert and producer have been concerned about the optimization of the mould taper.
随着环保意识的加强和对产品质量要求的日益提高，相对染色性能好、环保的活性染料是现今活性染料研究重点。
With the increasing improvement of environment consciousness and the quality requirement, producing the clean and good-performance reactive dyes has become the emphasis of its research.
研究了活性炭种类、上样速率、吸附剂种类及其浓度等条件对产品质量和收率的影响。
The effects of activate carbon, in-flux rate and adsorbent on the quality and yield of product were studied.
对BOT模式应用在汽车涂装线中的实践，以及项目实施完成后，如何进行涂装线生产管理和产品质量的控制进行了分析和总结。
This paper summaries use practice of BOT mode in automobile application line and how to do the management and control the quality of products after the project done.
简述了缠绕式垫片生产过程中工艺参数的控制原理，结构和工艺参数对产品质量的影响。
The controlling principle of process technology parameters is expounded. The influence of the structure and technology parameters on the quality of spiral wound gaskets is investigated.
对产品质量管理先进和产品质量达到国际先进水平、成绩显著的单位和个人，给予奖励。
Units and individuals having advanced product quality management, internationally advanced product quality and outstanding achievements are rewarded and praised.
加工温度、物料含水量对系统参数和大米膨化产品质量指标的影响极显著。
The system parameters and rice extrudate properties index were affected significantly by moisture content and barrel temperature.
五羊油漆重视的不仅是生产过程和产品质量，更重视对每位顾客的服务。
Wuyang paint emphasis is not only the production process and product quality, more attention to each customer service.
运用数理统计技术对产品的加工过程进行分析与控制，以达到稳定和提高产品质量的目的。
Analysis and control of working process of product by mathematical statistics, thus reached purpose that it is stable state and raise products quality.
考察了不同还原剂和带水剂对反应收率及产品质量的影响。
The effect of the different types of the reductant and water-carrying agent on the yield was investigated.
在设施、设备和工艺等，对产品质量会产生重大影响的改变需要进行验证。
Significant changes to the facilities, the equipment and the processes, which may affect the quality of the product, should be validated.
处理好热卷箱与轧机的速度匹配关系对稳定生产和提高产品质量至关重要。
It is important to match rolling speed with other equipment that assure stably working and improve quality of product.
对提高产品质量和劳动生产率有重要意义。
And it will raise the product quality and production rate prominently.
因此，研究摩托车曲轴组件动平衡检测方法和动平衡系统的开发对提高产品质量具有重要的意义。
So it is very important to improve product quality that makes research on measuring method dynamic balancing of motorcycle crank module and the development of system.
轿车转向节是轿车上的关键零件，对尺寸精度和产品质量要求很高。
A steering knuckle is the key component in cars, which needs high requirements in dimensional accuracy and product quality.
同时，还探索了分段控温程序、物料配比、反应接触时间等对产品质量和产率的影响。
The temperature-controlling programme, reaction material ratio and reaction time on the quality and yield of the product were also investigated systematically.
本文介绍的系统已成功地应用于汽车底漆涂装车间，对提高生产效率和产品质量有明显的帮助。
This DCS has been successfully applied in the bodywork primer line, which has greatly increased the efficiency and the product's quality.
生丝呈色发色是缫丝厂时有发生的问题，对产品质量和企业经济效益影响较大。
Undesired colour of raw silk often occurring in filatures exertS much influence upon product quality and economic efficiency.
研究了采用铜转炉烟尘制取硫酸锌工艺对锌、铁的浸取率和产品质量的影响。
The effect of preparation conditions of the captioned process on the leaching rete and properties of the product is discussed.
故在设计阶段对其进行结构分析和优化设计，对提高产品质量、降低生产成本具有十分重要的意义。
So, structural analysis and optimization in design are important for improving the product quality and reducing the production cost.
摘要：建筑产品质量管理应是对产品的立项、规划、设计和生产过程的全面跟踪管理。
Abstract: Quality control should be a comprehensive tracking and management on the planning, designing and production process of construction products.
在陶瓷产品生产过程中，快速测量和有效控制粉体的粒度及其分布，对提高产品质量、降低生产成本具有重要意义。
In the ceramic production process, fast mensurate and efficient control powder granularity and their distribution have important meaning in raising product quality and reducing cost.
重点分析和介绍了该脱扣器从设计到生产过程中对提高产品质量和可靠性所采取的一些措施。
Some adopted measures to improve the quality and reliability of ST intelligent release in the design and production are introduced and analyzed.
公司注重产品质量、工作质量和对客户的服务，严格执行行业标准。
The company focuses on quality of product and work and the service to customers, industry standards of strict implementation.
公司注重产品质量、工作质量和对客户的服务，严格执行行业标准。
The company focuses on quality of product and work and the service to customers, industry standards of strict implementation.
应用推荐