介绍了可编程控制器(PL C)在自动剪板机控制中的应用，对系统的硬件和软件设计作了较为详细的阐述。
This paper presents application of PLC in a plate shearing machine control, and expounds the design the hardware and software of the system in detail.
所有可编程控制器(plc)和处理器应采用植入目标链接(ole)的过程控制(opc)协议，以便与中央控制和数据处理系统的通讯。
All Programmable Logic Controllers (PLC) and Processors shall use Object Link Embedded (OLE) process control (OPC) protocol to facilitate communication to a central control and data processing system.
本文介绍了剪切仪的机电一体化系统的设计，包括剪切仪的工作原理、机械结构及以PC机和PLC(可编程控制器)为核心的控制系统的设计。
This paper introduces the design of electro-mechanical shear instrument system, including shear instrument working principal, mechanical structure and control system that use PC and PLC as the core.
装置采取了可编程控制器作为新型控制系统，实现对模拟量的分析和对电机及电磁阀的控制。
The apparatus adopts programmable controller to the new style control system and can realize the analysis of analog variable and the controlling of motor and electromagnetism coil.
介绍了利用可编程控制器对继电器控制式工业洗衣机进行改造的过程，实现了系统的高稳定性和可靠性。
The original relay control system of industrial washing machine is innovated and replaced by programmable controller, good stability and reliability of the system is achieved.
全面介绍了提高可编程控制器应用系统的可靠性措施，包括程序设计和其它部分的可靠性的措施。
The measures of improving the reliability of programmable controller application system were introduced, including the measures of program design and other.
根据系统要求，分别对控制系统的硬件和软件两个方面进行选择和设计，选用西门子公司的SIMATIC S7- 300可编程控制器。
According to system demands, it is chosen and designed for hardware and software of the control system, and SIMATIC S7-300 programmable controller of SIEMENS Corporation is chosen.
突出了变频器和可编程控制器(PLC)在起重机械中的控制特点，为该系统在其它起重机械的应用提供了实际经验。
The control particularity of converter and PLC in lifting machinery is expressed. The practical experience is provided in order to use the system in other lifting machinery.
介绍了可编程控制器(P LC)和伺服系统在高速管材剪切装置中的应用。
The application of PLC and servo to the device for high speed plastics pipe shearing is introduced.
本文介绍了可编程控制器（简称PLC）在水力发电站液压启闭闸门监控系统中的应用，着重介绍了系统控制原理和设计思想。
The paper introduces the application of PLC in monitoring system of hydraulic power stations hydraulic gate. Emphasos is on the principle of control and conception of design.
通过介绍可编程控制器（PLC）在舞台吊杆控制系统中的应用，阐述PLC控制系统硬件和软件的设计方法。
This paper presents the application of PLC to the control system for platform booms, and the designing method of PLC′s control system is discussed.
介绍了可编程控制器GEM80／163在烧结成品取制样控制系统中的应用，较详细地说明了所实现的功能和系统的特点。
The application of programmable controller GEM80/163 in sampling and preparation control system is described. The functions and characteristics of the system are depicted in detail.
在现代机床电气系统中，保压回路的控制方式可以通过继电器——接触器控制和可编程控制器PLC实现。
In electronic systems of modern machine tool, the control way of circuits of keeping pressure is able to be completed by the relay - toucher and the PLC.
介绍了可编程控制器(PLC)在超声波清洗机控制系统中的应用，对系统的硬件和软件作了详细的阐述。
The paper introduces the application of the PLC in the controlling system of the ultrasonic wave cleaning machine, the system is simple and reliability.
主要介绍了一种新型发光二极管（LED）自动封装机注胶系统的工作原理以及应用可编程控制器（PLC）和位控单元对其进行自动化的控制。
The article introduces the principle of the new LED automatic encapsulation equipment's infuse jelly system and automatic control by applying PLC and position control units.
介绍了橡胶压块机的工作原理和工艺流程，以及用可编程控制器控制橡胶压块生产的控制系统的硬件组成和详细软件。
The principle and process of rubber press as well as the composition of hardware and software design of PLC control system are introduced .
该系统由PLC可编程控制器、故障点选择器、故障形态选择器、合闸角控制器和故障开关组成。
The system consists of PLC, fault position controller, fault mode controller, fault Angle controller and fault switch.
介绍了锅炉吹灰器枪管环缝焊接机床的基本组成和工艺过程，设计了基于可编程控制器的电气控制系统和软件系统。
The technological process and the basic construction of a encircling weld lathe for boiler sootblower's pipe are described in this paper.
在系统的设计中，保留了传统的可编程控制器（PLC）的多点输入和多点输出控制的要求。
The demands of control of multiple input and output in the conventional PLC are maintained.
同时介绍了基于PLC可编程控制器应用于离子泵电源的启动和过流保护的远控系统。
The features of the BEPCII linac vacuum system are described, with the remote monitoring system used in the process of ion pump power starting to normal operation and overflow protection based on PLC.
本系统采用触摸、可编程控制器和称重仪表等构成全自动集散控制。
The system contains touchable, programmable controller and weighing instrument, realizing automatic distributed control.
我们的液压工程师同时也设计和制造可编程控制器及继电器系统。
Our in-house engineers also design and build PLC and standard relay control systems.
冲床通过提料和送料装置分三道工序，用复冲模冲冲出定子冲片和转子冲片，生产线的电气自动控制系统由可编程控制器PLC提供。
Through withdraw material and give material device to divide into three processes, the electric automatic control system of the production line is offered by programmable controller PLC.
结果表明，利用液压传动系统控制机械装置的运动，并与可编程控制器和计算机控制等结合，可以很好地实现工件的翻转。
The results show that workpiece turnover is achieved well by using hydraulic transmission system controlling the motion of mechanical device and combining PLC and computer control.
论文针对笔者自行开发设计的水源热泵的制热机组，设计可编程控制器PLC和触摸屏hmi自动控制系统。
This paper, designed developed for the author, s source heat pump heating unit, designed PLC programmable controller HMI human machine interface.
系统的扩展和移植难度发现的PCI(外设组件接口)总线运动控制器或PC(可编程控制器)的手段。
Difficulty of system Extending and transplant are found by means of PCI (Peripheral Component Interface) bus motion controller or PC (Programmable controller).
简述了钻机控制系统的原理，着重介绍了相关硬件、软件和由可编程控制器组成的控制系统的组态结构。
The theory of drilling machine control system is simply introduced. A PLC control system with emphasis on its hardware, software and control plan and control configuration is described.
该系统是一个实验型的设计，所以主要运用的元件是异步电动机、可编程控制器PLC、D/A转换器和变频器等微型 元件。
The system is a experiment , so use more micro-sensors about asynchronous motor, Programmable Logic Controller PLC, D/A transducer and variable frequency and speed adjusting.
所有元器件均来自一个品牌，包括真空断路器，空气断路器，电流接触器，热继电器，驱动，可编程控制器，输入输出模块，电站管理系统继电器和仪表，不间断电源，传感器和照明器材。
All of components come from one brand, from vacuum circuit breakers, air circuit breakers, contactors, thermal relays, drives, PLC, I/O, PMS relays and meters, UPS, sensors and lighting fixtures.
系统 主要包括图案提取单元、组态软件和可编程控制器以及转速测量和伺 服执行机构三大部分；
It goes through the following steps: First of all, to resolve the organizational points of the pattern to be woven according to the pattern extraction unit;
应用推荐