主要研究了环氧胶接接头在不同温度水中的老化行为，并用扫描电镜（SEM）和傅立叶红外光谱仪（FTIR）分析了其失效的机理。
The effect of temperature on the aging performance of epoxy bonded joint in water was researched, and its failure mechanism was analyzed by SEM and FTIR.
采用傅立叶变换红外光谱、图像扫描和显微分析等手段，研究了静电复印废纸溶剂法脱墨的机理。
The mechanism of de-inking of photocopy waste paper with solvent treatment was investigated by Fourier transforming infrared spectrum (FT-IR), image-scanning and microscope analysis.
所得样品用扫描电镜(SEM)、傅立叶红外光谱(FT - IR)、X射线衍射(XRD)和热重分析(TG)等分析方法进行了表征。
The obtained samples were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA).
傅立叶红外光谱(FTIR)及表面电子能谱(esca)分析表明第一步的GMA和第二步的肝素已依次接枝到PVC表面。
Analysis of Fourier Transform Infrared (FTIR) and Electron Spectrascopy for Chemical Analysis (ESCA) proved that GMA and heparin had been grafted onto the surface of PVC in sequence.
通过实时傅立叶红外光谱（FTIR）研究了杂化溶胶的凝胶固化过程。采用热重分析研究了杂化膜在氧气和氮气气氛下的热降解行为。
Real-time Fourier-transformed infrared spectroscopy (FTIR) was used to monitor the curing process of hybrid sol, indicating the formed imide group decreased with increasing titania content.
用傅立叶转换红外光谱(FTIR)研究了NR、环氧化天然橡胶(enr)和氯化天然橡胶(CNR)的热老化行为。
The thermal aging behaviour of NR, ENR and CNR was studied by using Fourier Transform Infrared Spectroscopy (FTIR).
用凝胶渗透色谱(GPC)、傅立叶变换红外光谱(FT - IR)和X射线衍射(XRD)对降解产物进行表征分析。
Gel permeation chromatography (GPC), Fourier transform infrared spectrometer (FT-IR), X-ray diffraction (XRD) were adopted to characterize and analyze the degraded products.
并且分别利用原子力显微镜和傅立叶变换红外光谱对薄膜进行界面形态和微观结构分析。
The surface morphology and chemical structure of the film are characterized by Atomic Force Microscope (AFM) and Fourier Transform Infrared Spectroscope (FTIR).
方法：运用傅立叶变换红外光谱、拉曼光谱、热分析和粉末x -射线衍射法研究马来酸替加色罗的晶型。
Methods: FTIR, Raman spectroscopy, thermal analysis and powder X-ray diffraction were applied to study the crystal forms of tegaserod maleate.
通过傅立叶红外光谱和氢核磁谱（1H NMR）测试表明所合成的丙交酯和乙交酯具有环状结构。
The resulted D, L-lactide and glycolide were found to have ring structure by fourier transform infrared spectrometry and proton nuclear magnetic resonance(1H NMR) spectrometry.
利用激光粒径分布仪、扫描电镜、差示扫描量热仪（DSC）和傅立叶转换红外光谱仪分别研究了微胶囊的粒径分布、表面形态、热性能和壳结构。
The diameter distribution, surface morphology, thermal properties and structure of the microcapsules were investigated by means of laser particle size analyzer, SEM, DSC and FT-IR, respectively.
阐述了傅立叶变换红外光谱仪的原理，并对红外光谱的特点进行了归纳和总结。
This article has expatiated on the principle of the FTIR spectrometer, and summarized its characteristics.
利用傅立叶红外光谱（FTIR）和X射线光电子能谱（XPS）技术，分析桦木单板化学镀前预处理后，桦木表面官能团的变化和化学镀后元素的变化。
The variation of function group and element on it was analyzed in the pre-treated and plated process by FTIR and X-ray photoelectron spectroscopy(XPS) analysis technology.
采用傅立叶红外光谱（FTIR）和X光电子能谱（XPS）对预处理前后PVDF中空纤维膜表面化学结构进行分析。
The surface compositions of the pretreated PVDF membrane were determined by Fourier transform adsorption spectrum (FTIR) and X-ray photoelectron spectroscopy (XPS).
运用傅立叶变换红外光谱和元素分析对两性共聚物进行了结构与组成的表征；分析了聚合物的热稳定性和抗蛋白质吸附能力。
The zwitterionic copolymers were characterized by FTIR and elemental analysis, while the thermal property and the capability of resistant to nonspecific protein adsorption were studied.
对疏松型纳米氢氧化镁(LN - MH)阻燃剂进行了扫描电子显微镜分析、X -射线衍射分析、元素分析、傅立叶变换红外光谱和粒径测定。
SEM, XRD, elementary analysis and FTIR were adopted to characterize the loose nano magnesium hydroxide (LN-MH), followed by the measurement of particle diameter.
采用一步法和二步法研究了聚乙烯薄膜表面的N- 乙烯基吡咯烷酮光接枝反应，并用傅立叶变换红外光谱仪定性表征了反应结果。
The photografting polymerization of Nvinyl pyrrolidone (NVP) on the surface of LDPE film with photo grafting method was studied and LDPEgNVP was characterized by FTIR qualitatively.
采用一步法和二步法研究了聚乙烯薄膜表面的N- 乙烯基吡咯烷酮光接枝反应，并用傅立叶变换红外光谱仪定性表征了反应结果。
The photografting polymerization of Nvinyl pyrrolidone (NVP) on the surface of LDPE film with photo grafting method was studied and LDPEgNVP was characterized by FTIR qualitatively.
应用推荐