保温材料在施工使用时的含水率应符合设计要求、工艺要求及施工技术方案要求。
The moisture content of insulation materials in construction should meet the design requirements, technical requirements and construction technical requirements.
分层施工能得到更好的的密度、含水量以及材料本身的均匀性。
Layered construction resulted in greater uniformity in the material itself and in its density and moisture content.
一般来说，木塑复合材料的含水率和其微生物降解的易感性有明显的相关关系。
Generally, there is a clear correlation between overall moisture content in WPC and its susceptibility to microbial degradation.
在采用有机保温时保温层的含水率不得超过5%，采用无机保温材料时产品含水率不得超过20%。
In the use of organic insulation when the moisture content of the insulation layer shall not exceed 5%, the use of inorganic insulation material moisture content should not exceed 20%.
不能用水或任何含水的材料和工具来灭电火。
Water or any substance and tools containing water should not be used to extinguish an electrical fire.
方法：利用微波分光仪测量不同含水量的生物材料对微波的透射、反射与折射情况并与微波防护布料相比较。
Methods: Measuring the reflectance and the refrangible of the fresh pigskin and comparing the result with the shelter clothing material.
指出控制聚酯多元醇的含水量和酸值是制备聚氨酯铸模材料的关键。
It was pointed out that controlling the trace water and acid value in the polyester polyols was the key procedure to prepare the polyurethane materials suitable for making cast mould.
影响砂砾石的变形的因素有很多，如砂砾石的材料特性、含水量、密实度、实验方法等。
There are many factors influence the deformation of aggregate, such as material characteristic, content of water, degree of compaction, test method .
以17个玉米杂交组合为材料，对10个穗部性状和子粒含水量进行相关性分析。
Correlation analysis was conducted on kernel water content and 10 ear characteristics of maize for 17 maize hybrid lines.
利用自制的波导网络分析仪，研究不同纤维材料的含水率与电磁波的屏蔽效能和功率吸收率之间的关系。
The relationship between the moisture content in different textile materials and the shielding efficiency and power absorption of microwave was studied with self-made waveguide-network analyzer.
用于各类纺织材料及制品含水率、潮率和纤维含量测定用的标准烘箱。
Used to test the moisture content and moisture regain of all kinds of textile material and production.
用于各类纺织材料及制品含水率、潮率和纤维含量测定用的标准烘箱。
Used for test the moisture content and moisture regain of all kinds of textile material and production.
在DMAD流体中，含水浆料可具有包括可降解材料的固相和包括粘弹性表面活性剂的液相。
In DMAD fluids, an aqueous slurry can have a solids phase including a degradable material and a fluid phase including a viscoelastic surfactant.
对影响产品性能的几个重要因素，包括胶凝材料用量、成型压力、物料含水率和养护制度等进行了研究探讨。
The important factors influencing the product performance are investigated, including the dosage of cementing agent, forming pressure, material moisture and curing regime.
根据水下结构混凝土裂缝中富含水分的特点，设计一种高性能复合注浆修补材料。
According to the characteristic of the cracks in underwater concrete structure that are full of water, a new type of high performance composite grouting was designed.
准确测定电工绝缘材料真空干燥过程中的含水量，并实现实时在线控制，在绝缘材料真空干燥工艺中具有重要的实践意义。
It is important practically for insulation during vacuum drying to measure moisture levels accurately and to realize the control on line.
含水率变化时膨胀土体积会产生吸水膨胀或失水收缩，这与温度变化时一般材料的反应相似。
Water swelling and drying shrinkage due to moisture change is the expansive soil's characteristic which is similar to the thermal effect of material.
材料按一定比例溶于含水溶剂，自发组装成胶束；
The materials are dissolved in an aqueous solvent in definite proportion to form the micelle by self-assembly;
热压过程中热压温度和刨花含水率是两个决定木质复合材料产品性能的关键因素。
Temperature and moisture content are the most important factors which can determine the panel properties directly.
该组合物包含颗粒研磨材料、以及赖氨酸、任选的氧化剂、和为此的含水载体。
The composition comprises a particulate abrasive material in combination with lysine, an optional oxidizing agent, and an aqueous carrier therefor.
水凝胶是一种具有三维网络结构的新型功能高分子材料，以其含水量高、溶胀快、柔软、具有橡胶般的粘稠性和良好的生物相容性等优点得到广泛应用及研究。
Hydrogel was moderate crosslinded, branched polymers, widely studied and applied because of the ability to absorb large quantities of water, swell quickly, soft, elastine and biologic consistence.
纳米水凝胶是一种水溶胀性的，具有交联结构的亲水纳米高分子 材料， 因其含水量高、溶胀快、生物兼容性好等优点得到广泛研究及应用。
Nanogels are sub-micron size, water-swellable cross- linked structures of hydrophilic polymers. They have the ability of absorbing large quantities of water, swelling quickly and biologic consistence.
虽然不同脱水条件使材料达到接近的含水率，但较高湿度脱水对PLB组织细胞伤害较小。
Although the water contents of PLBs at different dehydration conditions were very close, dehydration at higher humidity had less damage on PLB.
虽然不同脱水条件使材料达到接近的含水率，但较高湿度脱水对PLB组织细胞伤害较小。
Although the water contents of PLBs at different dehydration conditions were very close, dehydration at higher humidity had less damage on PLB.
应用推荐