公司主要生产、销售铝合金压铸件。
主要从事汽车用镁合金压铸件的生产及销售。
Our comapny specializes in manufacturing and selling Magnesium casting.
在均衡的锌合金压铸件，确保即使在最苛刻的应用，性能可靠。
The well balanced zinc - alloy die cast body ensures reliable performance in even the most demanding applications.
本文就提高汽车齿轮箱铝合金压铸件使用寿命，进行了失效分析。
According to the enhancing service life of aluminum alloy die-casting part of the automobile gear box, carried on the failure analysis.
建立了一套汽车发动机缸盖罩盖镁合金压铸件外观质量的评定系统。
An evaluation system for the surface quality of magnesium alloy die castings was established based on an automobile cylinder head cover component.
目前已在世界上广泛采用的锥形流道有助于生产高品质的锌合金压铸件。
Recently, the widely applied taper runner in the world is favorable for manufacturing of zinc alloy with high quality in die casting.
文中讲述镁合金压铸件特点和国外汽车行业对镁合金压铸件的需求情况。
The paper explains the characteristics of magnesium alloy die casting parts and points out the demand for magnesium alloy die casting parts in foreign automobile trade.
锌可用来作钢铁的保护层，还可制成锌板和锌合金压铸件用作建筑和工程材料。
Zinc can be used as a protective coating for iron and steel, and as a building or engineering material in the form of sheet zinc and zinc-alloy die-castings.
着重介绍一种简单实用的铝硅合金压铸件涂漆前化学处理工艺及其漆膜的结合性能。
This paper introduces emphatically a kind of chemical treatment process prior to the coating on the die casting pieces of aluminium-silicon alloy and its film adhesion.
流变压铸试片的组织分布很均匀，利于获得高质量的半固态a 356合金压铸件。
The billets with uniformly distributed microstructure in rheo-casting are beneficial to obtaining the A356 alloy die castings with perfect quality.
介绍了镁合金的优点及快速增长趋势，介绍了日立齿轮盖镁合金压铸件模具的设计过程。
Mainly introduces the advantages of magnesium alloy and its rapid increment trend, and the design process of magnesium alloy die casting for Hitachi gear cap.
介绍了锌合金压铸件中最常见的起泡缺陷，分析了起泡产生的原因，提出了解决问题的办法。
The most common blister defects in zinc alloy die casting were described. The reason for the defect formation was analyzed and an approach to defect decrease was offered.
汽车密封条、火车密封条、采暖风管、三元乙丙胶条、橡胶配件、塑料制品、铝合金压铸件等。
Automotive sealing strip, sealing strip trains, heating duct, EPDM tape, rubber accessories, plastic products, such as aluminum alloy die castings.
针对EA111油底壳铝合金压铸件的结构特点及工艺要求，介绍了一种切实可行的压铸模设计方案。
Aiming at the structure features and technological requirements for EA111 aluminum alloy oil tank, an available design plan for die casting die was described.
为解决传统的锌压铸件无氰预镀铜存在的一些问题，提出了一种新的锌合金压铸件无氰碱性预镀铜工艺。
A new kind of non-cyanide alkaline strike copper plating process for zinc alloy die-castings was developed in order to solve the problems in traditional non-cyanide strike copper plating.
本文主要介绍加工中心在铝合金压铸件加工中的应用方法和特点，并指出了存在的问题和今后的开发方向。
This paper mainly analyses its applicable methods and features in handling alufer foundry goods, it also indicates the problems and latter developing direction of Machining Centre.
充氧压铸已在铝合金、镁合金压铸件的生产中得到应用，如车轮、制动器缸体、液压传动阀体以及热交换器等。
Many Al or Mg alloy die castings, such as the auto wheel, the brake cylinder, the hydraulic valve, the actuator body and the heat exchanger, have been produced.
上海舜富压铸制造有限公司，坐落于上海市奉贤区金大公路7955号，是一家中德合资企业，专业生产铝合金压铸件和锌合金压铸件。
Shanghai Shunfu Die-Casting Co. , Ltd. , located in No. 7955, Jinda Road, Feng Xian District of Shanghai, is specialized in production of aluminum alloy and zinc alloy die-casting parts.
锌基合金的压铸件总是在氰化镀液中镀铜。
Zinc base die castings are always copper plated in cyanide baths.
锡焊件、铅锡合金、锌压铸件、铍青铜、磷铜等合金在电镀前也常用预镀铜来改善结合力。
Tin welding parts and lead-tin alloy die casting, zinc, beryllium bronze, phosphorus copper alloy in electroplating copper with commonly used before also gets to improve adhesion.
分析了铝合金端盖压铸件结构工艺性特点，介绍了压铸模的浇注系统及模具结构设计。
The structural characteristics of aluminum alloy cover was analyzed, and the design of pouring system and die-casting die structure were introduced.
在对AM 60 B镁合金轮毂压铸件进行表面耐蚀处理时，发现在前处理酸洗后，表面某些区域会产生黑色条纹状缺陷。
It is found that the surface defect like black stripes appeared in certain surface regions of die-casting wheel hub AM60B magnesium alloy after acid pickling in the anti-corrosion treatment.
采用CAE方法和正交分析法对铝合金支架压铸件的压铸工艺进行了优化设计。
CAE analysis and orthogonal design are applied in aluminum alloy housing die-casting process optimization design.
结合镁合金的压铸特性以及工艺要求，分析总结了压铸件结构设计原则。
The design principle for die casting structure was summarized based on die casting characteristics and processing requirement of Mg alloy.
本文采用流变铸造方法制备铝合金浆料，并对其在压铸件中产生的气泡进行了研究。
Improved rheocast process was studied for performing the high quality of Al alloy casting made of the preparation of the metal slurries.
摩托车铝合金左盖压铸件，壁厚比较均匀。
Aluminum motorcycle left-cover has the features of uniform wall-thickness and large profile dimension.
乐清市红烨通讯有限公司是专业从事锌合金和铝合金压铸生产，铸件加工，压铸模具开发与设计以及压铸件成品组装等。
Ltd. is specialized in the production of zinc alloy and aluminum die casting, casting machining, die casting mold development and design, and die casting product assembly.
不同的锌合金有不同的物理和机械特性，这样为压铸件设计提供了选择的空间。
Because different zinc metal have different physical and mechanical characteristic, we can design cast optionally.
不同的锌合金有不同的物理和机械特性，这样为压铸件设计提供了选择的空间。
Because different zinc metal have different physical and mechanical characteristic, we can design cast optionally.
应用推荐