将叶片模型变换到加工位置,算出五轴联动刀具轨迹。
The model of blade was changed to machining position, and the track of cutter for five-axis simultaneous machining was calculated.
对空心叶片模型型腔和加强筋结构设计参数进行了分析;
The design parameters of chamber and stiffener of hollow blade model were analyzed.
同时采用刀位显示验证方法对加工某叶片模型所得到的刀具轨迹进行验证。
Then the tool-path of a manufactured blade model is verified by using display verification method.
针对涡轮叶片的弯扭变形对叶片模型配准定位的不利影响,提出一种考虑弯扭变形的叶片模型配准方法,以提高叶片模型配准的可靠性与鲁棒性。
In order to improve the reliability and robustness of the blade model alignment process, a blade model alignment method which takes into consideration its blend and twist deformation is presented.
纽约洛克·菲勒大学的弗朗西斯·科森利用电脑模型来调查叶片上的环存在的原因。
Francis Corson of Rockefeller University in New York used computer models to examine why these loops exist.
此外,维斯塔斯公司发言人迈克尔霍尔姆(MichaelHolm)表示,昨天丹麦有一座V112型风力轮机的模型折断了叶片。
Separately, Michael Holm, a spokesman for the company, said a portion of the blade on the first prototype of its V112 wind turbine broke off late yesterday in Denmark.
论文包括四部分:紊流风场模型、风力机载荷分析、风力机叶片载荷分布、风力机叶片可靠性分析。
The paper includes four parts: turbulence wind field model, the load of the wind turbine, the load distribution of wind turbine blade, the wind turbine reliability analysis.
该模型用于模拟发生严重荒漠化的鄂尔多斯高原植物群落的季节及年生长、叶片投影盖度、蒸发系数。
The model was developed to simulate seasonal and annual growth, foliage projective cover (FPC), and evaporative coefficient in the Ordos plateau, where serious desertification happened recently.
本文从八隅规则、16—18电子规则及杂化分子轨道内在联系简单地介绍了等叶片相似模型。
This paper briefly introduces the isolobal analogy model from 8 electron rule, 16-18 electron rule and molecular hybrid orbitals theory.
本文目的就是要建立一套适合于水轮机转轮叶片刚强度与振动的分析模型和计算方法。
This thesis aims at developing a model and calculation method of rigidity, strength and vibration of the blade .
提出了一种预测汽轮机叶片服役寿命的综合数值模型。
A comprehensive model for predicting the service life of steam turbine blades is presented.
根据非回转体环向缠绕理论及叶片产品的具体要求,分析缠绕工艺,建立了张力控制系统的数学模型。
Next, according as no - gyrating round fiber winding theory and concrete request of vane, analyzing the winding technics, found the mathematics model of tension control system.
实践中采用这种数学模型所设计的控制器极大改善了叶片角度的调节性能。
It has been shown in application that the controller designed by this mathematical model could improve the adjusting performance of blade Angle.
计算中采用的风电场数学模型考虑了风电机组的叶片、轮毂、齿轮箱和连轴器以及异步发电机的特性。
The mathematical model of wind turbine applied in the calculation takes account of characteristics of the blades, hub, gearbox, shaft and asynchronous generator.
提出了一种获得透平叶片及其微孔CAD模型的光学测绘方法。
An optical mapping method for acquiring CAD model of turbine blade and its tiny holes is proposed.
为了研究成组阻尼叶片的特性,本文建立了双边微滑移模型。
In order to study the characteristic of grouped damping blade, the Two-Bar Microslip Model is developed.
通过电站真机与模型转轮应力测试结果的分析证明,混流式转轮叶片应力与机组出力之(?)存在线性关系。
In this paper, the stresses analysis on prototype runner in power station and model runner proved that there is a linear relationship between blade stress and output of Francis turbine.
对叶片式水力机械的水力设计模型进行了深入的对比研究。
This paper is concerned with a comparative study of the hydraulic design model for the blade type hydraulic machinery.
但是,把最高温作为参数输入模型后,太原地区番茄叶片总光合速率降低,而呼吸速率却在升高,从而引起净光合速率的明显降低。
In the model, inputting the radiation and the average temperature the net leaf photosynthetic rate of greenhouse tomatoes in Tai Yuan district was a little bit higher than that in Holland.
利用螺旋的升力线模型和变分法原理对螺旋桨叶片环量分布进行了数值优化。
The optimum distribution of circulation on a marine propeller blade is numerically determined by using the lift_line vortex model and variational calculus.
作为水力模型库的应用验证,进行了叶轮叶片的相似换算设计,获得了令人满意的设计结果。
To testify the application of the hydraulic model library, doing the design of the similar transformation of the impeller blade, and attaining the satisfied result.
将螺旋体分解成螺旋轴和螺旋叶片两部分,建立LS200螺旋体结构的CAD模型,并对其进行有限元网格的划分。
CAD model of LS200 helical structure is established by dividing the helical body into helical axis and helical blade and finite element meshing is performed.
本文对于现有的叶片失速颤振计算模型进行了一些改进,以期使其更接近于真实物理图画。
Some improvements in previous computation models of blade stall flutter in axial-flow compressors have been made on both aerodynamics and structural dynamics so as to make the models more practical.
结果证明间断相位法的计算模型是正确的,研制的叶片振动状态监测系统有良好的应用前景。
It is right that the modal of discontinuous phase method measures blade vibration parameters and the monitoring system has a good perspective in engineering application.
文中建立的模型也可以推广应用于具有其它阻尼器叶片的动力分析,作为阻尼叶片优化设计的基础,为阻尼叶片设计提供实用工具。
Dynamic characteristic of other dampers of blades can also be analyzed by the model, so it may be usable for damped blade design and be the base for optimization of damped blade.
通过对悬臂板,叶片轮盘组合体模型所作的试验说明了这种方法的优越性。
It is shown in the tests that this method has many advantages when it is applied to a cantilever plate and a blade-disc assembly model.
本文应用湍流模型对涡轮叶片尾缘针肋通道的换热与流动进行了二维数值模拟研究。
In this paper, heat transfer and fluid flow in passage for trailing edge of turbine blade with pin-fin arrays is studied numerically.
本文建立的水轮机固定导叶和活动导叶后卡门涡频率预估模型,可在设计阶段进行叶片绕流卡门涡频率的预估。
The vortices shedding frequency calculation model proposed by this paper can be used to predict the shedding frequency of the Karman vortices for hydraulic turbines design.
本文采用环形薄板模型,得到关于卧螺离心机叶片弯曲问题的较为精确的计算公式。
In this paper, a thin ring plate mode is used, and more exact calculating formula is got for bending of the centrifuger vane.
在改进后的损失模型中,定义了新的叶片负荷系数,并用它作为一个特性准则导出了叶型损失计算公式。
In this improved loss model, a new profile loading coefficient is defined and using it as a characteristic criterion, formula for estimating the profile toss coefficient is derived.
应用推荐