前端的可编程输入带宽可确保在所有分辨率清晰，低噪声的图像。
The front end's programmable input bandwidth ensures sharp, low noise images at all resolutions.
主板数字输入端口．仪表主板提供3个可编程输入端口，接收无源触点开关信号。
Motherboard digital input port: the instrument main board provides 3 programmable input port. receives the passive contact switch signal.
该系统实现了可编程输入输出（PIO）和超级直接存储器存取（UDMA）两种模式，实际运行效果良好，达到USB2 .0的高速率传输要求。
The system realizes two modes of PIO and UDMA. The running practice shows good effect and the high speed transmission of USB2.0 is achieved.
使用契约式设计，可以用可编程表达式指定对于组件输入和返回结果的要求。
With Design by Contract, you can use programmatic expressions to specify the requirements on inputs to a component, as well as on the returned results.
Expect不只使用固定“脚本”作为应用程序的输入，而是使交互的每个击键都可编程。
Instead of just having a fixed "script" that you feed as input to an application, Expect makes every keystroke of the interaction programmable.
Arduino是一种经济的、可调节和可编程的开源微处理器，可读取其模拟插脚处的电压形式的数据输入。
The Arduino is an inexpensive, adaptable, and programmable open source microprocessor that can read data input in the form of voltage at its analog pins.
可编程控制器在高于24V的直流电压等级控制回路中应用时需解决输入模块的电压变换和谐波干扰等问题。
In the application of above 24V fort current voltage grade control circuit, Voltage Alternating and resonant wave interference of input model for Programmable Logic Controllers must be resolved.
如果输入信号电平超过可编程阈值，粗调阈值上限指示器就会变为高电平。
If the input signal level exceeds the programmable threshold, the coarse upper threshold indicator goes high.
在系统的设计中，保留了传统的可编程控制器（PLC）的多点输入和多点输出控制的要求。
The demands of control of multiple input and output in the conventional PLC are maintained.
介绍了可编程视频输入编码芯片SAA7111和可编程视频解码输出芯片SAA7185工作原理和接口电路设计。
Introduces operation principle and interface circuit design of Video Input Processor SAA7111 and Video Output Processor SAA7185.
介绍了人们在实践中总结出的关于可编程序控制器的输入输出点数的扩展及节省的方法。
This article introduces the methods concluded from practice about the expanding and saving of data units of imput and output capability of PLC.
PLC可编程序控制器在应用中常遇到由于输入点不够而增加硬件设置的问题。
In application of PLC programmable controllers, it is ofter to meet with the problem to have to add hardware installations due to that the input points are not enough.
该设计采用可编程逻辑器件，VHDL硬件描述语言为输入工具，接口简单，可靠性高，具有一定的实用价值。
The programmable logic device and VHDL is used as input tools, which have simple software interface, good reliability and practical value.
该设计采用可编程逻辑器件，ABEL HDL硬件描述语言为输入工具，接口简单，可靠性高，具有一定的实用价值。
The programmable logic device and ABEL-HDL is used as input tools, which have simple software interface, good reliability and practical value.
具备特定功用的控制输入和可编程输出继电器。
Control inputs and programmable output relays for specifics functions.
输入信号作用于一个以模拟调制器为基础的专有可编程增益前端。
The input signal is applied to a proprietary programmable gain front end based around an analog modulator.
旋转编码器转换成机械和工业PC输入成电子信号，控制器可处理的计数器，转速表，可编程逻辑。
Rotary encoders convert a mechanical input into electrical signals, which can be processed by counters, tachometers, programmable logic controllers and industrial PCs.
两线串行接口，实现输出会被强制平仓，调整和上升和下降，在可编程的摆率与测序的延迟时间。 输入和输出电压，以及输入和输出电流和温度是可读的。
The two-wire serial interface enables outputs to be margined, tuned and ramped up and down at programmable slew rates with sequenced delay times.
最后介绍了应用个人计算机来向可编程序控制器中输入程序。
At last it introduces using the personal computer to input the program into the Programmable Packageing Machinery.
根据IEC61508对可编程逻辑器件功能安全的要求，提出基于ARM的模拟量输入模块的安全设计。
Aiming at the functional safe demands of programmable electronic systems in IEC61508, this paper proposes the safe design of Analog Input (AI) module based on ARM Microprocessor.
AD 73360是一主要适用于工业电表和多路输入系统的可编程三相电量测量ic器件。
AD73360 is a programmable three-phase electrical parameter measurement IC chip. It is mainly used in industry ammeter and multi-input systems.
所有元器件均来自一个品牌，包括真空断路器，空气断路器，电流接触器，热继电器，驱动，可编程控制器，输入输出模块，电站管理系统继电器和仪表，不间断电源，传感器和照明器材。
All of components come from one brand, from vacuum circuit breakers, air circuit breakers, contactors, thermal relays, drives, PLC, I/O, PMS relays and meters, UPS, sensors and lighting fixtures.
所有元器件均来自一个品牌，包括真空断路器，空气断路器，电流接触器，热继电器，驱动，可编程控制器，输入输出模块，电站管理系统继电器和仪表，不间断电源，传感器和照明器材。
All of components come from one brand, from vacuum circuit breakers, air circuit breakers, contactors, thermal relays, drives, PLC, I/O, PMS relays and meters, UPS, sensors and lighting fixtures.
应用推荐