现在它已能生产高强度结构钢、弹簧钢、工具钢、可热处理钢、耐磨钢、硅钢和不锈钢。
It is currently used to produce high strength structural steel, spring steel, tool steel, heat treat steel, abrasion steel, silicon steel and stainless steel.
齿轮经热处理有较高的硬度和强度，与轴一同安装在可更换的轴套内运转。
Gear after heat treatment with high hardness and strength, and shaft installed in the replaceable shaft sleeve.
采用此方法可评价各种因素对局部焊后热处理的影响，并寻求最佳加热条件。
A series of different PWHT conditions are studied to find the critical heated width by using this method.
该方法可清楚地显示整个热处理过程中的应力变化并可找到临界的加热宽度。
This method clearly shows the whole history of stress relief during PWHT and a critical heated width can be obtained.
通过热处理手段获得可区分晶粒尺度和片层厚度的全片层组织。
The fully lamellar microstructures with different grain size and lamellar spacing were obtained by heat treatment.
适当的热处理可提高聚苯胺的结晶能力。
Appropriate heat treatment can enhance tne crystalline ability of PAn.
它能够实现从钢水到完整的最终产品的不间断生产，包括在线热处理和质量检查，可显著降低成本。
It enables uninterrupted production from liquid steel to the finished product, including on-line heat treatments and inspection procedures which leading to substantial cash-cost.
热处理及表面处理、焊接、喷涂方面有完善的配套供应链，可满足客户比较全面需求。
Heat treatment and surface treatment, welding, spraying have a full package of supply chain to meet customer demand for more comprehensive.
适当的热处理可提高裂纹扩展所需塑性功，从而在一定范围内改善复合材料塑性。
Suitable heat treatment will increase the crack extension energy, and improve the plasticity of the composite.
用碳化钨钢结硬质合金制造螺纹钢丝轧辊，通过选用适当的合金牌号及热处理工艺，可显著提高轧辊的使用寿命。
The service life of screw steel wire rollers can be remarkably raised by using WC steel bonded carbide and suitable heat treatment technology.
通过热处理可提高轨钢的强度及硬度，接触疲劳强度也随之提高。
Heat treatment can increase the tensile strength and the hardness of the rail steel, and the contact fatigue strength is also increased.
试验结果表明，适当的热处理可使相应脱油沥青的蜡含量降低，同时可提高脱沥青油的收率，改善脱沥青油的质量。
Test results showed that proper thermal treatment decreased wax-content of DOA, increased production of DAO and improved quality of DAO.
含钴高速钢采用特定的热处理工艺处理，可充分发挥材料的潜在性能，显著提高其强韧性。
Special heat treating process will bring latent properties of high speed steel with Co into full play and obviously improve its strength and toughness.
齿轮经热处理有较高的硬度和强度，与轴一同安装在可更换的轴套内运转。
A higher gear after heat treatment the hardness and strength, and the shaft can be replaced with bushings installed in the operation.
应用此法于模具和某些易磨损机件上可较大地提高机件的使用寿命，且方法本身安全、经济，在一般的热处理设备条件下即能进行。
This method is safe, economical and easy to adopt with conventional heat treating equipment. Applied to some dies and easily worn-off parts, it can prolong their service life to a great extent.
本发明的方法可良好地实现含稳定化元素的奥氏体不锈钢厚壁管道的焊接及热处理施工。
The method can well realize the construction of welding and heat treatment of the austenitic stainless steel thick-wall pipeline containing stabilizing elements.
结果表明，磁场退火热处理可形成感生磁各向异性，改善薄膜的软磁性能、提高薄膜的应力阻抗效应。
The results show that magneto-annealing can improve film stress impedance effect and film soft magnetic performances, and induce magneto-anisotropy.
齿轮经热处理有较高的硬度和强度，与轴一同安装在可更换的轴套内运转。
The heat have high gear strength and rigidity, and shaft installed in the replaceable together within the collar.
将成组技术、模块化设计分别引入热处理生产和组织管理和热处理工艺设计，可提高效率、降低成本。
The concurrent design method of heat treatment process is presented, it can increase efficiency and reduce cost whe...
后热处理可改善变形和表面应力状态、细化组织、提高硬度。
The post treatment can improve deformation and surface stress state, refine microstructure and increase hardness of cladding layer.
采用热处理与机械力化学改性相结合的方法活化膨润土，可制备橡胶补强填料。
A combined method of thermal treatment and mechanochemical modification of bentonite is briefly presented in this paper.
对复合微球进行热处理除去有机物中心，制备出壁厚可剪裁的空腔硅球。
The polymer cores were removed by calcination and hollow silica spheres with tailored wall thickness were produced.
稀土变质处理可降低铸态韧性，增加硬度，同时提高热处理后的韧性及硬度。
RE modification treatment decreased as-cast impact toughness and increased hardness, at the some time, improved both the impact toughness and hardness in heat-treatment state.
改变热处理方法进行操作，可缩短生产时间2天，提高产品合格率6 %。
The production time can be shortened 2 days and the qualified rate can be improved 6% by the original parameters adjustment and the heat operation improvement.
若环境温度低于冰点，应预先向泵内通入热蒸汽，进行预热处理，然后才可启动齿轮泵。
If the environment temperature is below freezing, should advance to pump into the hot steam, preheating treatment, and then to start the pump.
结果表明，激光处理后试样表面熔凝区的组织主要为胞状枝晶组织，经后续热处理可转变为细小的等轴晶粒组织，并形成了良好的超塑连接条件。
The results show that, after laser surface processing, a melt layer with cellular-dendrite structure is formed, which could transform into very fine-grained structure during the annealing treatment.
结果表明，激光处理后试样表面熔凝区的组织主要为胞状枝晶组织，经后续热处理可转变为细小的等轴晶粒组织，并形成了良好的超塑连接条件。
The results show that, after laser surface processing, a melt layer with cellular-dendrite structure is formed, which could transform into very fine-grained structure during the annealing treatment.
应用推荐