针对零件的可制造性设计，研究制造信息的获取与表达方法。
According to design for manufacturability of the parts, the method was studied to access representation of manufacturing information.
描述了一种采用分辨率提高技术后用于可制造性设计的验证方法。
We describe a post resolution-enhancement-technique verification method for use in manufacturing data flow.
基于SWB环境实现了nm级NMOS集成化管芯的可制造性设计及优化。
Based on the SWB environment, the design for manufacturing and optimization of the nano-level NMOS integrated chips were implemented.
可制造性设计是一种新颖的设计方法，它是生产工艺质量的保证，并有助于提高生产效率。
DFM is a novel design method. It is a guarantee of production quality, and increases efficiency of production.
硅片上互连线几何变异提取对于超深亚微米工艺节点下集成电路可制造性设计研究开发极其关键。
Interconnect geometric variation extraction is a key factor for the integrated circuit design for manufacturability research and development, under ultra deep sub-micro process nodes.
超大规模集成电路(VLSI)中的参数成品率最优化问题一直是集成电路可制造性设计的重点研究问题。
The maximum problem of parametric yield in VLSI is always an important issue in design for manufacturing (DFM).
在电路尺寸达到纳米量级的今天，设计与工艺的独立性被打破，引发了一系列可制造性设计问题与相关研究。
IC design and manufacturing are not independent any more, therefore a lot of design for manufacturability issues are caused.
它可有效支持自顶向下的并行产品设计以及与主模型相关的可制造性设计和可装配性设计，以缩短产品开发周期。
It not only effectively supports the top-down combine product design but manufacturing design and assembling design related to main model as well so as to shorten the period of product development.
虚拟装配是虚拟制造的关键技术之一，它能有效支持自顶向下的并行产品设计以及与主模型相关的可制造性设计和可装配性设计，以缩短产品开发的周期。
As well as the manufacturing possibility design and assembling possibility design correlated with the master model, which will greatly reduce the products research and development period.
基于特征对零件设计与工艺设计的并行过程进行分解与重组，基于特征进行零件设计、工艺设计和可制造性评价。
The concurrent process of CAD/CAPP is decomposed and re organized based on feature. The design, process planning and manufacturability evaluation of parts is implemented based on feature.
为使企业物流更好地支持制造系统重构，在规划设计的各个环节应突出通用性、可拓扑性。
At each link of planning and design, common utilization and being topological should be stressed so that enterprise logistic can support the reconfiguration of manufacturing system.
针对产品并行设计过程特点，提出一种分层递阶(三层七阶段)的产品可制造性评价策略。
A hierarchy evaluation method of three levels and seven stages of product manufacturability is presented based on the process of product concurrent design.
面向制造的设计技术和方法是并行设计技术的重要内容和研究热点之一，实时的零件可制造性分析系统是DFM技术的重要组成内容。
Technique and methodology of design for manufacture(DFM) is one of the most hot researches of concurrent design, and real-time manufacturability analysis system of part is important part of DFM.
借助于该方法，能够在设计阶段有效地获取与制造相关的方向信息，实现对设计的可制造性分析。
By the method, manufacture information can be acquired effectively in the design stage, manufacturability of the design can be analyzed.
本文介绍了基于制造工艺可制备性的复合材料产品设计方法。
This paper introduces the methodology of design for manufacturing for composite structures.
它能帮助现有的CAPP系统进行具体的、经济的工艺规划，并且让设计者有效地进行产品的可制造性评估。
It can help existing CAPP systems to generate realistic and economical process plans, and lets designers efficiently undertake manufacturability evaluation.
良好的设计和工艺制造可提高电容器的可靠性和使用寿命，满足使用要求。
Fine design and technological manufacturing can improve reliability and operation life to meet operation requirements.
另一方面，传统的结构化程序设计方法造成制造自动化软件难以满足可扩展性、可重用性的要求。
On the other hand, traditional manufacturing automation software was developed oriented structure, which hardly satisfies the requirement of reuse and extension.
近些年来，它已经推出了专门的设计解决方案，通过处理可制造性，可靠性和收益等有关问题来帮助设计师提高设计的质量。
Over the years it has rolled out solutions specifically designed to help designers improve quality by dealing with issues related to a design's manufacturability, reliability and yield.
面向产品族设计的可重构制造系统，兼顾了数控加工中心的柔性强和刚性生产线效率高的优点，同时具有良好的经济性，是满足大批量定制要求的最佳模式。
To realize reconfigurable manufacturing, not only the products and their processes, but also manufacturing equipment and production system should be designed with reconfigurable strategies.
集成电路参数成品率的研究是集成电路可制造性工程和设计研究的重要内容之一。
The integrated circuits parametric yield is important problem of the IC designing and manufacture engineering.
可制造性知识包含结构工艺性、设计标准化以及企业生产资源约束等，其内容具有复杂性和不确定性的特点。
The knowledge of manufacturability contains technological property of structure, standardization of design and constrains of enterprise production resource etc.
电路采用常规元件设计，一致性高，可制造性极佳。
The circuit is designed with routine element and has high consistency and excellent manufacturability.
全球经济一体化环境下，产生了一些先进的设计与制造技术，如快速设计与制造、大规模定制生产及可适应性设计与制造等。
Then, using SHU Rapid Manufacture Center as the instance, the integrated rapid design and manufacture system based on CPC and MVPN is established.
由此可避免消声器制造的盲目性及重复实验，为设计优良消声器提供新的有效途径。
These can avoid making muffler blindly and having tests repeatedly, which provides a new and effective way tod…
由此可避免消声器制造的盲目性及重复实验，为设计优良消声器提供新的有效途径。
These can avoid making muffler blindly and having tests repeatedly, which provides a new and effective way to design excellent mu...
由此可避免消声器制造的盲目性及重复实验，为设计优良消声器提供新的有效途径。
These can avoid making muffler blindly and having tests repeatedly, which provides a new and effective way to design excellent mu...
应用推荐