材料进入这些步骤是为了使新材料的可制造性和替代那些没有通过调试的部件。
Materials enter into these steps in fabricability and substitution of new materials for the parts that did not make it through debugging.
产品可制造性评价是并行工程中最重要的内容之一。
Product manufacturability evaluation is one of the most important works in Concurrent Engineering researches.
电路采用常规元件设计，一致性高，可制造性极佳。
The circuit is designed with routine element and has high consistency and excellent manufacturability.
产品可制造性评价是并行工程中最重要的研究内容之一。
Product manufacturability evaluation is one of the most important works in concurrent engineering (CE) researches.
针对零件的可制造性设计，研究制造信息的获取与表达方法。
According to design for manufacturability of the parts, the method was studied to access representation of manufacturing information.
提出了平面二次包络环面蜗杆副可制造性评价的内容和方法。
The evaluation contents and relevant methods are proposed for the manufacturability of plane-generated double enveloping Hourglass worm gear pairs.
过程模型体现了滚动轴承结构的技术性能、行为和可制造性。
The technology performance, behavior and manufacturability of rolling bearing structure are incarnated by process model.
描述了一种采用分辨率提高技术后用于可制造性设计的验证方法。
We describe a post resolution-enhancement-technique verification method for use in manufacturing data flow.
本文细致研究和分析了专家系统技术在产品可制造性分析中的应用。
The technology of expert system applied to product manufacturability analysis is researched in this paper.
可制造性：新式汽车中含有种类繁多的电子组件和复杂的布线线束。
Manufacturability: Modern vehicles already contain a vast array of electronics with complicated wiring harnesses.
本文讨论了产品可制造性的基本概念、指标体系和指标值的确定方法。
A hierarchy of manufacturability criteria is proposed and some calculation and inference methods of manufacturability criteria are determined.
基于SWB环境实现了nm级NMOS集成化管芯的可制造性设计及优化。
Based on the SWB environment, the design for manufacturing and optimization of the nano-level NMOS integrated chips were implemented.
集成电路参数成品率的研究是集成电路可制造性工程和设计研究的重要内容之一。
The integrated circuits parametric yield is important problem of the IC designing and manufacture engineering.
最后以涡轮叶片榫头特征的可制造性分析为应用实例，说明该方法的有效性和实用性。
An example of rabbet feature manufacturability of a turbine blade was given to show the method available.
结果表明，PP S天线罩的可制造性、尺寸稳定性等综合性能优于PTFE天线罩。
The results show that the performances such as producibility and dimensional stability of PPS radome are superior to that of PTFE radome.
提出了一种基于知识的汽车覆盖件可制造性评价系统结构，研究了实现系统的关键技术。
This paper presented the architecture of knowledge based manufacturability evaluation system for automotive panels (KMESAP) and researched the key technologies to realize the system.
针对产品并行设计过程特点，提出一种分层递阶(三层七阶段)的产品可制造性评价策略。
A hierarchy evaluation method of three levels and seven stages of product manufacturability is presented based on the process of product concurrent design.
阐述了可制造性的概念，并对产品可制造性评价方法，即粗评、精评、综合评价予以讨论。
The paper sets forth the concept of manufacturability and discusses the evaluation of products' manufacturability i. e. the rough evaluation, the precision evaluation and the synthetic evaluation.
可制造性设计是一种新颖的设计方法，它是生产工艺质量的保证，并有助于提高生产效率。
DFM is a novel design method. It is a guarantee of production quality, and increases efficiency of production.
借助于该方法，能够在设计阶段有效地获取与制造相关的方向信息，实现对设计的可制造性分析。
By the method, manufacture information can be acquired effectively in the design stage, manufacturability of the design can be analyzed.
硅片上互连线几何变异提取对于超深亚微米工艺节点下集成电路可制造性设计研究开发极其关键。
Interconnect geometric variation extraction is a key factor for the integrated circuit design for manufacturability research and development, under ultra deep sub-micro process nodes.
超大规模集成电路(VLSI)中的参数成品率最优化问题一直是集成电路可制造性设计的重点研究问题。
The maximum problem of parametric yield in VLSI is always an important issue in design for manufacturing (DFM).
它能帮助现有的CAPP系统进行具体的、经济的工艺规划，并且让设计者有效地进行产品的可制造性评估。
It can help existing CAPP systems to generate realistic and economical process plans, and lets designers efficiently undertake manufacturability evaluation.
在电路尺寸达到纳米量级的今天，设计与工艺的独立性被打破，引发了一系列可制造性设计问题与相关研究。
IC design and manufacturing are not independent any more, therefore a lot of design for manufacturability issues are caused.
基于特征对零件设计与工艺设计的并行过程进行分解与重组，基于特征进行零件设计、工艺设计和可制造性评价。
The concurrent process of CAD/CAPP is decomposed and re organized based on feature. The design, process planning and manufacturability evaluation of parts is implemented based on feature.
在此基础上，讨论了基于约束检验的可制造性评价内容和提出了结构工艺性评价和加工可行性评价的分层评价树；
On this basis, the content of manufacturability evaluation based on boundary checking is discussed and the layered evaluation tree of part configuration and machinability is proposed.
它可有效支持自顶向下的并行产品设计以及与主模型相关的可制造性设计和可装配性设计，以缩短产品开发周期。
It not only effectively supports the top-down combine product design but manufacturing design and assembling design related to main model as well so as to shorten the period of product development.
近些年来，它已经推出了专门的设计解决方案，通过处理可制造性，可靠性和收益等有关问题来帮助设计师提高设计的质量。
Over the years it has rolled out solutions specifically designed to help designers improve quality by dealing with issues related to a design's manufacturability, reliability and yield.
面向制造的设计技术和方法是并行设计技术的重要内容和研究热点之一，实时的零件可制造性分析系统是DFM技术的重要组成内容。
Technique and methodology of design for manufacture(DFM) is one of the most hot researches of concurrent design, and real-time manufacturability analysis system of part is important part of DFM.
面向制造的设计技术和方法是并行设计技术的重要内容和研究热点之一，实时的零件可制造性分析系统是DFM技术的重要组成内容。
Technique and methodology of design for manufacture(DFM) is one of the most hot researches of concurrent design, and real-time manufacturability analysis system of part is important part of DFM.
应用推荐