均匀化热处理是变形铝合金生产工艺中重要的工序，对产品的质量影响很大。
The homogenization is an important heat treatment step during wrought aluminium alloy production, it influences greatly the quality of the products.
通常，在标准与手册或其他有关读物中对变形铝合金材料的状态代号都未作详细的说明。
Commonly, the temper symbols of deforming aluminum alloy materials haven t have the detailed explanation in the standards, handbooks and other relative readings.
本文系在硫酸、硫酸亚锡溶液中对添加有稀土的6063变形铝合金进行了阳极氧化和电解着色。
The anodic oxidation and electrolytic colouring of 6063 aluminum alloy containing rare earths in solutions of sulfuric acid and stannous sulfate are studied.
结果表明：变形铝合金半固态模锻成形件经新工艺处理后，力学性能明显提高，缩短了处理时间，节约了能源，提高了生产效率。
The results show that the mechanical property of semi-solid drop-forgings is improved obviously, its processing time is shortened, the energy is saved and the production efficiency is also improved.
这个过程还依靠用在铝合金中的硅粒改变形状来完成，即找到气泡并阻止其膨胀。
It relies on silicon fragments, which are used in aluminium alloys, changing shape and, in effect, pinning down the gas-containing pores to prevent them from expanding.
本产品拉网夹头及框架全部采用专用铝合金型材制作，保证受力后不变形。
This product pulling chuck and all adopt special aluminum alloy frame, ensure no deformation force.
全新高强度铝合金金属结构，有效防止变形及保持表面亮度。
The new high-strength aluminum alloy structure, effectively prevent the deformation and maintain the surface brightness.
移动工作台采用高强度挤压铝合金制造，强度高，不变形。
Movable table is high strength extruded aluminum alloy, high strength, not deformed.
伸缩缝由于铝合金温度变形较大，为使幕墙有足够的变形随动性，幕墙立柱需设置伸缩缝。
Expansion joints due to large aluminum alloy temperature deformation, to make the curtain wall has enough deformation servo, curtain wall pillar setting expansion joint.
为超高强铝合金材料通过大变形来获得高性能产品进行了初步的探索。
The primary explore is processed for high performance of ultra high strength aluminum alloy by great deformation.
结果表明，此状态下的铝合金在超塑性变形过程中晶界宽度和形态会发生改变。
The results showed that grain boundary width and grain boundary form of the aluminum alloy would change during superplastic deformation.
对两种形式的温差拉伸控制铝合金薄板焊接残余变形的效果和规律进行了研究。
The effects of distortion control in welding thin aluminum alloy plates by two kinds of thermal tensioning were investigated.
对质点强化型的高强度7475铝合金超塑变形中显微组织变化进行了研究。
The microstructural changes of high-strength aluminum alloy 7475 in the process of superplastic deformation were systematically investigated.
采用合理的平均力试验验证了模型的有效性，为进一步研究航空铝合金数控加工变形提供了可靠的边界条件。
The milling force model is validated according to cutting experiments and it can offer a reliable boundary condition for the further study of NC machining distortion of aviation aluminum-alloy.
研究LC4铝合金的高温变形规律，拟合出具有较高精度的高温本构模型。
The deformation regulations of aluminum alloy LC4 at high temperature were studied, and a precise constitutive model was developed.
采用电解复膜-光蚀技术研究了LD2 铝合金薄壁管材变形和再结晶组织特征。
The structure characteristics of deformation and recrystallization for LD2 Aluminium alloy tube were investigated by means of an electrolytic coating film-light etching technique.
研究了防锈铝合金LF6热变形工艺对组织的影响。
The relationship of the heat deformation processes of the antirust aluminum alloy LF6 and its microstructure were studied.
对轿车铝合金轮毂模具涂敷装置的基本结构及工作原理进行了探讨，并对杆件的变形予以分析与计算。
In this paper, both basic structure of lubricant coating device and its working principle are discussed and the deformation of some workpieces is analysed and calculated.
在正常使用情况下，肯德基门若出现变形，很可能是由于使用的铝合金型材原料质量差和厚度过薄导致。
In normal use case, if the KFC door if deformation, it is likely due to the use of aluminum alloy material quality difference and thickness lead.
借助于高放大倍率的二次复型组织，观察了LF6铝合金超塑变形后的表面晶粒组织。
With the secondary duplicated model structure with high magnification, the surface grain structure of LF6 aluminum alloy superplastically deformed is observed.
研究了LF6铝合金超塑性变形中的显微组织变化及断口形貌特征。
The microstructural change and fracture morphology during superplastic deformation of LF6 Alumini-um alloy have been examined.
对温差拉伸和随焊激冷配合使用控制铝合金薄板焊接变形的联合工艺进行了数值模拟和试验研究。
The technique using thermal tensioning and trailing intense cooling simultaneously to reduce welding distortion was investigated by both numerical simulation and experiments.
全机采用高强度铝合金结构梁组成，超强结构耐久不变形。
The whole machine is composed of high strength aluminum beam structure, super structure, durable without deformation.
用TEM、电阻、力学性能试验等方法研究了固溶后的冷变形对6082铝合金时效析出过程的影响。
The effect of cold deformation on the aging precipitation of the solution-treated 6082 Al-Mg-Si alloy was investigated by the methods of TEM, electric resistance, mechanical properties tests.
对于铝合金检具变形引起的尺寸不稳定，给予规范的热处理和粘接装配，使发动机缸体用检具本体变形得到控制。
The dimension instability is caused by aluminium alloy deformation. The methods such as heat treatment and assembly to control the inspection device deformation are put forward.
为获得轧制态5083铝合金超塑性变形行为的工艺参数，对超塑性变形行为及其原理进行了研究。
Aimed at obtaining the technology parameters of the super plasticity, this paper introduces the investigation into the rolled 5083 aluminum alloy and discusses the theory of the super plasticity.
铝合金导线拉拔成型塑性变形大，数学模型复杂，集几何非线性、边界非线性、材料非线性于一体。
Drawing process of aluminum alloy wire has large plastic deformation, which mathematical model is complicated including geometric nonlinearity, boundary nonlinearity, material nonlinearity and so on.
利用温度与变形实时测量系统，对铝合金5a12薄板氩弧焊接动态角变形过程进行了试验研究，探讨通过特征值来描述角变形动态行为。
The characteristics of dynamic welding angular distortions of aluminum alloy 5a12 with tig welding are investigated by self-made welding dynamic temperature and distortion measuring system.
利用温度与变形实时测量系统，对铝合金5a12薄板氩弧焊接动态角变形过程进行了试验研究，探讨通过特征值来描述角变形动态行为。
The characteristics of dynamic welding angular distortions of aluminum alloy 5a12 with tig welding are investigated by self-made welding dynamic temperature and distortion measuring system.
应用推荐