分析了火焰管缩口的变形特点。
The deformation characteristic of the flame pipe necking was analyzed.
分析了高速工具钢冷、温拔变形特点。
描述了用不同尺寸的毛坯拉伸零件时的变形特点。
The forming characteristics of different size drawing parts were also described.
同一地点同一层土在不同时期的变形特点也不尽相同。
Even the same layers in the same location have different features in different stage.
根据钢管冷斜轧过程的变形特点，建立了辊型设计系统。
Based on the deformed characteristics of the process of steel tube cold cross rolling, an system of roll configuration design has been established.
最后，在分析隧道变形特点的基础上，给出了相应的施工对策。
Finally, based on the deformation characteristics, the countermeasures of construction technologies are given.
本文从边坡倾倒的变形特点出发，分析了倾倒变形的力学机制。
According to the deformation features of toppling slope a mechanical mechanism for the toppling deformation of slope is analyzed in this paper.
对大块非晶合金在过冷液相区内的超塑性变形特点进行了评述。
Superplastic behaviors of bulk amorphous alloys in the supercooled liquid region were reviewed.
本文介绍了圆豆形花纹板的轧制工艺，分析了花纹板的变形特点。
In this paper, the rolling technology and deformation characteristics of strip with surface pat-tern of round beans are introduced and discussed.
分析了采用锥形轧辊，在辗轧角和送进角同时存在时金属的变形特点。
Also analyzed are the deformation characteristics of the metal when conical roll is used and there exist both toe Angle and feed Angle.
针对变形特点，并借助理论分析，解析影响刚架结构变形的主要因素。
In allusion to the specialty of deformation, it resolves the main factors which influence the distortion of the metal rigid frame structure with theoretical analysis.
根据短肢剪力墙结构的受力和变形特点，建立了异形墙肢多垂直杆模型。
According to mechanical property and deformation feature of short-lag shear wall, special-shaped multi-component model is put up.
叠加褶皱与拼接带具有成生联系，且各自代表了不同构造部位的变形特点。
Therefore, the superimposed fold system and the suture zone are interrelated in origin and they have the distinct deformation features in di.
叠加褶皱与拼接带具有成生联系，且各自代表了不同构造部位的变形特点。
Therefore, the superimposed fold system and the suture zone are interrelated in origin and they have the distinct deformation features in different structural positions.
本文分析了初轧的变形特点，研究了基本的计算模型及压下制度的计算方法。
Based on deformation features of bloom in blooming mill, the rational design method of reduction schedule is proposed.
本文旨在通过卷边过程中管子受力状态及变形特点分析，揭示卷边变形行为；
The deformation behaviour is explained based upon loading state and deformation feature during inversion of the tube.
本文根据曲梁的变形特点和虚功原理，分析了约束钢梁自身刚度的变化过程。
In this paper, based on the behaviour of a curved beam, the change of the stiffness of restrained steel beams is studied.
对钢管超高强混凝土长柱、偏压柱在荷载作用下的挠度及变形特点进行了研究。
The deflection and deformation of slender column and eccentrically loaded column of ultro-high strength concrete filled steel tubes under loading were studied.
通过拉延筋基本单元模拟试验，揭示了板料在拉延筋内的变形机理和变形特点；
By means of drawbead unit simulation experiment, the deformation regularity and characteristics of sheet metal in drawbead have been revealed.
摘要深部巷道围岩的高应力、大变形特点，要求支护系统具备高强让压的特性。
Abstract: Due to high stress and large deformation of deep roadway surrounding rock, the support system must have high-strength yielding characteristics.
通过有限元模拟针对斜轧穿孔过程中毛管的变形特点，对其壁厚不均进行了计算。
Addressing deformation characteristics of the shell during rotary piercing operation, wall thickness unevenness is calculated by means of the FE simulation method.
不仅不同的土层有不同的变形特点，在不同地点的同一层土也有不同的变形特点。
Not only do the different layers have difference deformation features, but also the same layers in the different location have different deformation features.
简要介绍了残积土边坡滑动变形特点和地质分布特征，分析了残积土的强度特性。
The slide characteristic and geologic distribution of residual soil slope are introduced, the strength character of residual soil is analyzed.
根据张力减径过程的变形特点，采用组元建模技术，编写了弹塑性有限元计算程序。
Based on the characteristics of tube stretch-reducing process, the elastic FE calculation program is prepared by means of the constituent element modeling technique.
根据深基坑桩排式支护中护壁桩的受力变形特点，分析了被支护土体中的成拱作用。
According to the working characters of retaining piles for deep excavation, the arching effect in adjoining soil is analyzed.
在选定最优吊索方案的基础上，详细讨论了施工过程中主缆、吊索及加劲梁的受力和变形特点。
And based on the optimal sling tension program, the paper discusses in detail the main cables, sling and the girder's force and deformation characteristics in the construction process.
建立数学模型时要根据土层实际变形特点分别建立相应的模型，才能模拟出真实的地面沉降情况。
The corresponding models based on the actual deformation features of the soil should be built in order to simulate the real subsidence condition.
本文分析了数控旋压成形加工中薄板的变形特点及所产生的旋压缺陷，并提出了相应的预防措施。
The force applied, forming characteristic and disfigurement are analyzed for sheet in NC spinning. The approach for preventing disfigurement is presented.
本文依据试验结果建立的考虑黄土损伤效应的流变模型能够很好的描述黄土加速蠕变阶段的变形特点。
According to the test results, a rheological model that can reflect damage effect of loess is built in the paper, the model can analog accelerate deformation character well.
而且对于不同的土层组成，不同的上部结构形式，相互作用体系所表现的受力和变形特点也不尽相同。
Moreover, for different soil composition and different types of superstructure, to some extent, the force and deformation characteristics of the interaction system are different.
应用推荐