提出了密封试样细管排液的体积变形测定方法，该方法可测定水泥石自初凝起的收缩。
A new method of volumetric deformation measurement is proposed, which can measure the shrinkage of cement paste from initial setting.
还对试验性工程进行了水平荷载和垂直荷载作用下墙板的应力和变形测定，并和计算结果作了比较。
Measurements of stresses and strains under load were made and the data obtained were compared with the computed results.
通过试验来测定轮胎刚度，也就是说把轮胎的变形也考虑到课题中去。
Through testing to determine tire stiffness, ie the deformation of the tire also takes into account issues and going.
用于测定单根纱线及合成纤维长丝及变形丝的断裂强力和断裂伸长率。
To determine a single synthetic filament yarn and silk and deformation of the breaking strength and elongation at break.
是测定滑坡体滑动面（带）位置、滑体厚度、滑动方向、滑速及判断滑体深部变形状态行之有效的方法之一。
It is one of the effective methods for detecting position of slip plane, measuring thickness of slidebody, finding slip direction, calculating slipspeed and judging deep deformation case of slidebody.
探讨水泥混凝土路面不均匀变形指标与测定方法，并提出了建议参考值。
Discuss about uneven distort target and determine method for cement concrete pavement and suggest referenced value.
用计算机技术和传感技术组成系统构成型砂多项性能测试仪，测定湿型粘土砂塑性变形临界值。
Critical value of plastic deformation of green sand has been tested by molding sand multi-tester using computer and sensors.
本文引入金属塑性变形传播概念，利用光弹法测定了两种钢的塑性变形传播速度。
The plastic deformation propagation speeds of steels are determined by using photo-elastic coating and high speed photography method.
设计了铸件变形强化测试装置，测定了几种不同材质的铸件抗变形能力。
In this paper, an apparatus for distortion intensive measurement of casting is designed to test the distortion resistance of several kind of casting materials.
主要介绍利用探针和传感器测定拉深过程中摩擦系数的实验方法，据此获得变形区内摩擦系数的分布情况。
A method with probe and sensors is recommended to determine, the dynamic coefficient of friction in deep-drawing process.
用于测定氨纶丝断裂强度、断裂伸长率、定伸长负荷、应力松弛，塑性变形等性能指标。
Used for testing indexes of polyurethane monofilament, such as breaking tenacity, elongation at break, load at specified elongation, relaxation of stress, plastic deformation, etc.
为了给荔枝精深加工机械的研发提供设计依据和理论基础，对荔枝的物性参数(球度、果壳厚度和鲜果平均密度等)和机械特性(压缩破坏载荷及变形)进行了测定。
In order to provide design and theoretical basis for intensive processing machinery of Litchi fresh fruit, physical and mechanical property of Litchi fresh fruit were measured.
测定了TPV的耐溶剂性能和耐热变形性能。
The resistance to solvent and resistance to thermal distortion of TPV were determined.
介绍一种用动态信号分析仪测定强化木地板榫接部位横向变形量大小的方法。
Introduced a measure method to crosswise deformation amount of tenon and mortise place in the high-quality laminate flooring products by means of dynamic signal and analysis apparatus.
用显微硬度、电子拉伸等试验方法，测定了银、铜、钽的硬度、抗拉强度、延伸率与冷加工变形量的关系及冷加工态银、铜、钽退火软化曲线。
The hardness, tensile strength and elongation of Ag, cu and Ta, their relationship with the degree of cold work and soften annealing curves of cold-worked Ag, cu and Ta were investigated.
提出了采用加热空气介质的高温空气槽测定材料热变形温度(HDT)的方法，通过几种高分子材料在油浴中及高温空气槽中测定HD T值的比较。
The way of heating air by using high temperature-air container was designed for the measurement of the heat deflection temperature (HDT) of polymer materials.
本文结果对动力机器基础设计、用共振法测定地基的变形模量和承载力具有实用价值。
This paper is of practical significance on both design of dynamic foundations and the resonant test for the modulus and bearing capacity of ground.
用于测定氨纶丝断裂强度、裂伸长率、伸长负荷、力松驰、性变形等性能指标。
Used for testing indexes of polyurethane monofilament, such as breaking tenacity, elongation at break, load at specified elongation, relaxation of stress, plastic deformation, etc.
本文叙述了用于测定动变形模量和动泊松比的三轴试验设备。
This paper describes the triaxial test system which was designed for determining dynamic modulus and poisson's ratio.
目的：对不同粘附力变形链球菌临床分离株表面蛋白V区、P区编码基因进行序列测定。
Objective: To sequence V-region and P-region gene of surface protein of serotype c Streptococcus mutans clinical isolates with different adherent abilities.
本文从引入虚元的热弹性板元有限元计算和试验测定两方面分析研究了平板堆焊时平面外变形的形态及产生机制。
In present paper, the form and mechanism of formation of out-of-plane distortion during bead-on-plate welding was studied by thermal clastic analysis with introduction of dummy element and experiment.
应用DXC-300A型核孔膜红细胞变形能力测定仪对112例高血压病病人红细胞滤过指数进行了测定。
Red cell deformability was measured by a DXC-300A red cell deformability apparatus in 112 patients with hypertension.
用音弦和电阻应变测量仪器测定构件表面及内部钢筋的变形。
The strains on the surfaces of ferrocement plating and internal reinforcing rods are picked up by sound-string tansducers and strain gauges.
用于测定棉、毛、麻、包芯纱的单根纱线及合成纤维长丝、变形丝的断裂强力和断裂伸长率。
Used for testing breaking tenacity, elongation at break of single yarn made of cotton, wool, jute, core-spun yarn etc, at the same time including synthetic fibre filament, textured yarns.
该文以铅作为试验材料，测定单向压缩有限变形和双向受约束两种情形下的载荷位移曲线，建立了基于欧拉描述的铅有限变形本构方程。
The keypoint to simulate the metal forming process by using finite deformation theory is to define the constitutive equations of the material.
在实验轧机上测定了不同变形率下的前滑值，并用同一数据源对前滑值进行了理论计算。
The forward slip value in different reductions was tested on a laboratory mill. The forward slip value based on the same data resources was also calculated by the theory formula.
本文通过试件的中心受拉试验，测定了砼的受拉应力-变形全曲线。部分试件还进行了反复荷载试验。
Complete stress-deformation curves for concrete in tension were obtained from axial tension tests in which some of the specimens were tested under cyclic loading.
用于测定棉、毛、麻、包芯纱的单根纱线及合成纤维长丝，变形丝的断裂强力和断裂伸长率。
Used for testing breaking tenacity, elongation at break of single yarn made of cotton, wool, jute, core-spun yarn etc, at the time including synthetic fiber filament, textured yarns.
方法测定6 8例老年性耳聋病人和5 0例健康老年人的血浆超氧化物歧化酶（SOD）和脂质过氧化产物丙二醛（MDA）的水平及血液红细胞变形性。
Methods The Red Cell Deformability (RCD)and the levels of the blood plasma SOD and MDA in 68 patients with presbycusis and in 50 healthy old people were measured.
方法测定6 8例老年性耳聋病人和5 0例健康老年人的血浆超氧化物歧化酶（SOD）和脂质过氧化产物丙二醛（MDA）的水平及血液红细胞变形性。
Methods The Red Cell Deformability (RCD)and the levels of the blood plasma SOD and MDA in 68 patients with presbycusis and in 50 healthy old people were measured.
应用推荐