发泡密度高且采用连续发泡式发泡，具有优良的耐酸碱性，耐久性。
Continuous foaming process with high foaming intensity; It has excellent chemical resistance and abrasion resistance.
发泡橡胶的储能模量随着微孔平均密度的增加而减小，而随着微孔平均面积的增加而增加。
The storage module decreases with increasing the average density of microholes, but it increases with increasing the average area of microholes.
利用试验手段，探讨了发泡颗粒轻质土密度、强度等物理力学性质在干湿循环环境下的稳定性状。
By laboratory tests, the density and the strength of light soil mixed with foamed beads are discussed.
介绍了一种新型的化学发泡气体充填与固体充填减轻制备的低密度低温深水水泥浆体系，并对其在海洋深水环境下的性能进行了系统的室内评价研究。
A new low temperature and deepwater slurry system prepared with chemical foaming gas and solid packings, which can reduce the density of the slurry, is introduced.
当剂量增加到足以溅射掉第一代表面发泡时，针孔形成，针孔的密度随剂量增加而增加。
At doses high enough to sputter the first-generation blisters, Pinholes can be formed and pinhole density increased with increase in the total dose.
具有高导热、低密度的新型高性能碳泡沫是最近发现的一种高新材料，它以中间相沥青为前驱体，然后发泡、碳化、石墨化制得。
Carbon foam is a novel thermal management material which is produced from mesophase pitch, and possesses high thermal conductivity after carbonization and graphitization.
优选适宜的发泡机头温度可以抑制气体逃逸，提高发泡倍率，获得更低密度的聚丙烯发泡材料。
To improve the volume expansion rate, lower the density of pp foam, gas escaping should be avoided by selecting the appropriate die temperature.
不会的。我们会根据您产品的形状、重量以及包装测试要求，设计不同密度的发泡原料，并采用最佳的包装方案来降低包装成本。
We will use your product's shape, weight and packaging test requirements, the design of different density foam material, and use the best packaging solutions to reduce packaging costs.
本文介绍了用线型低密度聚乙烯(LLDPE)进行填充发泡的试验结果。
This paper deals with the foaming of Linear Low Density polyethylene (LLDPE) with filler.
高密度发泡实心硅胶密封圈，防尘防水等级高，灯具防护等级IP65,1级电气绝缘保。
High-density foam solid silicon rubber sealing ring, high level of dustproof and waterproof, IP65, electrical insulation protection is 1 degree.
用于PVC发泡制品，使制品气孔结构稠密而均匀，密度更低。
The invention is used for producing PVC foaming products which have dense and even stomata structure and lower density.
研究了压缩率和密度对发泡法制备的泡沫铝样品吸声性能的影响，与报道的日本用发泡法制备的泡沫铝样品的研究结果进行了比较。
Influence of compressive ratio and density on sound absorbing property of foamed aluminum made by bubbling method has been studied and compared with that of Japanese sample.
讨论了稳定剂品种、 改性剂品种和发泡剂用量对制品密度、泡孔结构以及外观表面的影响。
The effect of certain types or contents of stabilizers, modifies and blowing agents on extrudate quality density, surface, and cellular structure are described.
结果表明，发泡后的复合材料密度明显降低，发泡剂含量为1.5%时发泡复合材料的密度降低了17%，冲击强度提高了20%。
The result showed that the density of composite by foaming was obviously reduced. With the 1.5% foaming agents added, the density was reduced by 17% and the impact strength was increased by 20%.
高密度保温材料，采用高压发泡设备进行浇灌，保温效果优异，能效比高。
With the high density heat insulator and adopt high pressure foaming machine to irrigate, the showcase performs excellent heat preservation effect and high energy efficiency ratio.
随着热水发泡时间的延长，泡沫塑料密度呈现负相关的联系。
With extending the period of hot water foaming time, the density of foamed sheet was decreased.
试验结果表明，加入纤维能使镁质中间包涂料的体积密度大幅度地降低，有机发泡剂的加入能够进一步降低涂料的体积密度及干燥收缩；
The result shows that adding fiber can greatly reduce the bulk density of coating. The organic expanding agent can also lower bulk density of coating and linear change in drying process.
本文用水作发泡剂，通过变化用水量，研究软质聚氨酯泡沫塑料的密度与物理机械性能之间的关系。
This Paper studies the relationship between density of flexible polyurethane foam and it's physical-mechanical properties Under the condition of different amount of water as blowing agents.
详细讨论了发泡时间对泡沫铝密度、孔隙率的影响，描述了发泡过程孔结构的演变过程，并对发泡机理进行分析。
Effect of foaming time on the density and porosity of foam aluminum was discussed in detail. Evolution of pores in the foaming process was described, and the foaming mechanism was analysed.
采用超微孔高密度聚胺酯发泡保温层，减少冷量流失，保温效果佳，实现节能降耗。
Using insulation layer of ultramicropore high-density polyurethane foam, loss of cooling capacity is reduced to ensure better insulating effect and to achieve energy saving.
木塑复合发泡材料可以克服一般木塑复合材料诸如密度大、成本高的缺点，同时改善隔音隔热性能。
Foaming wood-plastic composite (WPC) is not only possessing of lower density and cost than general WPC, but also better properties of soundproofing and heat insulation.
但时间延长到一定程度，发泡塑料密度变化不大。
But the time extending enough, the density of sheet has small changes.
高密度发泡实心硅胶密封圈，防尘防水等级高，灯具防护等级IP65,1级电气绝缘保护。
High-density foam solid silicon rubber sealing ring, high level of dustproof and waterproof, IP65, electrical insulation protection is 1 degree.
结果表明，改变CO_2的压力可以控制发泡的泡孔密度和泡孔大小。
The results show that the cells' density and size can be controlled by controlling the processing pressure and the foaming temperature.
适合：泡沫板，低密度板，发泡板等。
适合：泡沫板，低密度板，发泡板等。
应用推荐