起动模型可以应用到其它涡扇发动机的起动过程模拟和设计中。
The new starting model can be applied to other turbofan engine's starting processes' numerical simulation and design.
可以把这个起动模型应用到其它涡扇发动机的起动过程的模拟和设计中。
The new starting model can be applied to other turbofan engine "s starting processes" numerical simulation and design.
某型发动机的起动过程采用时序控制方式，由起动程序机构来实行控制。
Using time sequence method, the starting process of some aero-engine is controlled by starting control box.
设计了发动机的起动、怠速、智能功率、减速断油和跛行回家等柴油机运行控制策略。
Control strategy for engine running control such as starting, idling, smart power output, decrease fuel cut off, limp home and over-speed protection are designed.
涡轮起动机是航空发动机的重要组成部分，其工作性能直接影响发动机的起动可靠性。
Turbine starter is a very important composing part for aero-engine, its work capability directly affects the reliability of aero-engine in start.
沃尔沃加密锁相当于一个起动锁，因为起动钥匙通过安全加密的电信号和随机滚动码与发动机的起动电路进行通信。
The Volvo Immobiliser serves as a starter block since the starter key communicates with the engine′s starting circuit via security-coded electronic signals and random rolling codes.
研究分析电控发动机转速传感器、喷油器波形变化与发动机起动故障特征的内在联系，从而运用波形分析法快速准确诊断电控发动机的起动困难故障。
The starting failures of electronic-controlled engine can be diagnosed quickly and correctly by analyzing the internal relation between the waveform change and the characteristic of the failures.
第二个主要的部件是起动机，它用于起动发动机。
The second main part is start motor which is used to start the engine.
这些具有不同的特性，由于发动机起动，需要非常高的扫射安培时间很短。
These have different characteristics since engine starting requires very high bursts of amperage for short periods.
本文分析了汽油发动机的冷起动使用因素，介绍了改善汽油发动机低温起动的新装置。
This paper analyses the factors affecting cold starting of gasoline engine and introduces some new devices to improve the engine starting at low temperature.
起动转速取决于发动机的型号、大小和状态以及进入发动机的空气的温度。
The starting speed depends upon the type and size of the engine, its condition and the temperature of the air entering the engine.
最后完成了发动机冷起动参数无线传输软、硬件的设计工作。
Finally, the designation of soft and hard wares for the wireless transmission of engine cold start's parameter.
发动机起动系统提供引气、燃油、点火及扭矩，以使发动机转动并加速到慢车所需的转速。
The engine starting system provides air, fuel, ignition and torque for rotating the engine to an rpm at which the engine can accelerate to idle rpm.
指出采用废气分析仪进行发动机起动故障诊断具有相当重要的实用价值，并通过试验得到了验证。
It is pointed out that diagnosing engine start failures with the exhaust gas analyzer has very important practical value and it is validated by tests.
快速装卸，用以将附件(如液压泵，燃油泵，起动器等)接到发动机附件齿轮箱上的夹具。
QUICK-ATTACH-DETACH, a clamp for attaching accessories (hydraulic pump, fuel pump, starter) to the engine accessory gearbox.
然后，利用建立的数学模型分析部件材料温升对燃气涡轮轴发动机起动性能的影响。
Then, the model was used to analyze component material warm-up effect on the turboshaft engine starting characteristics.
例如在发动机停机或者起动失败时出现的发动机倒转也会导致链条张力的波动。
For example when the engine outage or the defeated starting appears, it will cause the fluctuation of the chain tension.
现在当发动机起动时，关闭的热控制阀引导热废气。
Now, when the engine is started, the hot exhaust gases are deflected by the closed heat-control valve.
在发动机台架上对微型涡喷发动机进行的起动过程控制和转速闭环调节试验表明，该控制软件在时间精度和可靠性方面能够满足发动机控制的要求。
Engine tests of starting procedure control and rotation speed in closed loop have proven that the time precision and reliability of this software meet the demands of engine control system well.
然后，利用建立的数学模型分析起动电机特性对燃气涡轮轴发动机起动性能的影响。
Then, we can use the model to analyze starter characteristic effect on start performance of turboshaft engine.
本论文建立了一个新的涡扇发动机起动过程模拟的模型。
This paper build up a new model of turbofan engine's starting process.
以采用强迫起动方式的补燃发动机涡轮泵联试系统为研究对象，建立了系统的动态模型。
The dynamic model is established for a turbo-pump test system of a staged combustion cycle engine which employs forced start.
为验证原本只为在地面起动发动机而设计的某型燃气涡轮起动机的空中辅助起动性能，在飞行试验台上，对其进行了空中辅助起动试验。
In order to validate auxiliary airstart performance of a gas turbine starter designed only for the ground engine, the test of auxiliary airstart was conducted on the flight test rig.
为研究液压自由活塞发动机(HFPE)的起动性能，对HFPE样机的典型起动方式进行了实验研究。
To study the starting performance of hydraulic free piston engine (HFPE), the typical starting phases of HFPE were investigated through experiments.
研究了不同进气温度、加热方式和蓄热箱容积对发动机冷起动排放的影响规律。
This paper presents the engine emissions at different intake temperature, heating methods and volume of accumulators during the cold start.
研究了不同进气温度、加热方式和蓄热箱容积对发动机冷起动排放的影响规律。
This paper presents the engine emissions at different intake temperature, heating methods and volume of accumulators during the cold start.
应用推荐