在氧气补充控制中采用前馈反馈控制方式。
The feedforward feedback method was used in oxygen replenishment control.
由于采用了电流负反馈控制方式，制动力矩的大小可根据需要进行控制。
Due to electric current negative feedback control, the intensity of braking torque can be controlled as it is needed.
针对纯滞后对象，提出一种串级双环状态反馈控制方式，使这种对象获得较理想的控制品质。
A kind of cascade control system with state feedback for pure dead-time processes is presented in this paper.
以单自由度硅微振动轮式陀螺仪的检测动极板为控制对象，系统的结构特性决定了只能选择反馈控制方式对其进行控制。
The control object in a single-freedom silicon micromachined vibratory gyroscope is the proof mass, because of system structure, feedback control is the only choice to control the proof mass.
功率变换器主电路采用电压电流双闭环瞬时值反馈控制方式，电容电压和电流瞬时值控制环提高了系统的稳定性、硬特性、稳态特性及动态特性。
The voltage and current real-time feedback control method is adopted, which improves the stability, the stiffness, the static characteristics, and the dynamic characteristics of the system.
一种采用脉冲控制方式，此种驱动器与电机闭环，但不反馈到数控系统，这种驱动器在某种程度上可称为开环控制的伺服控制。
A kind of the pulse control mode, the drive and motor closed loop, but not to the numerical control system, the feedback device, in a sense, can open loop control called the servo control.
信息反馈校验指令控制方式普遍运用于同步轨道静止卫星的指令控制系统中。
The command remote control system with information feedback checking is commonly used in command control system of geostationary satellite.
本文采用电压反馈的闭环控制方式，设计完成了数字PID调节器，使逆变器输出稳定的正弦波。
The paper takes advantage of a single close-loop control method based on voltage feedback, and enables the inverter to produce steady sine waves by the digital PID adjuster designed.
另一种采用电压控制方式，通过电压的高低进行电机的转速控制，电机的反馈信号通过驱动器反馈到数控系统进行位置控制。
Another kind of the voltage control mode, through the high and low voltage on motor speed control, motor feedback signal through the drive to the numerical control system feedback position control.
一种采用脉冲控制方式，此种驱动器与电机闭环，但不反馈到数控系统，这种驱动器在某种程度上可称为开环控制的伺服控制。
A kind of the use of impulsive control mode, the drive and motor closed loop, but not feedback to the numerical control system, this drive, in a sense, can open loop control called the servo control.
反馈是系统实现其自动控制的一种方式和手段。
Feedback is a method that a system realizes its self control.
反馈方式控制的应用可以有效地改善系统的动态特性和稳态特性。
Adoption of appropriate feedback contol loop will greatly improve the dynamic and static characteristic of the control system.
简介几种常用电机调速方式。对应用较好的内反馈高频斩波调速技术的工作原理、功能与特点，以及在工业控制中的应用情况予以介绍。
The article mainly the speed governing technology with internal feedback high frequency chopper wave, including its working principle, function and feature, and application to Industry control.
论文针对系统的图像获取方式与图像预处理及反馈控制等关键技术开展研究，并通过对高炉辐射特性的分析研究，确定了CCD的型号、工作波段和参数。
According to technique of image pre-processing and feedback control and radiated characteristic of furnace, the model, working waveband and parameters of CCD is settled.
为提高灵敏度和线性，该加速度计采用静电力反馈闭环控制方式，检测与处理电路采用高精度双极线性电路工艺进行了工艺流片。
To improve sensitivity and linearity, feedback loop was adopted with electrostatic in detection and managing circuit, which is fabricated with high precision bipolar linear circuit technology.
逆变控制采用SPWM方式，由数字PID调节器实现输出电压瞬时值反馈，并采用有效值调节实现稳压。
SPWM method is adopted to control the inverter model. Digital PID adjuster is used to realize voltage loop and the value modulation is used to maintain the value of output voltage.
本文提出了利用谐波陷波法反馈方式进行失真度控制的一种方案，分析了控制过程，并给出了反馈算法。
A precept of distortion control which USES harmonic notch feedback method is discussed in this paper. The control process is analyzed, and the feed-back arithmetic is given.
特点：采用PLC程控，配置日本米亚基ct- 110焊接控制器，三段通电方式，具有电流缓升缓降功能。采用焊接变压器次级反馈控制电流及导通角控制。
Features: PLC programming, equip with Japan Miyachi CT-110 welding control device, three segments electrification method, with current slow increasing and slow dropping function.
特点：采用PLC程控，配置日本米亚基ct- 110焊接控制器，三段通电方式，具有电流缓升缓降功能。采用焊接变压器次级反馈控制电流及导通角控制。
Features: PLC programming, equip with Japan Miyachi CT-110 welding control device, three segments electrification method, with current slow increasing and slow dropping function.
应用推荐