供电行业远远走在了前面，主要原因是他们可以利用电网来收集传感器反馈的数据和控制伺服开关。
Power utilities are well ahead, not least because they can use the grid itself to collect sensor data and control switches.
一种采用脉冲控制方式，此种驱动器与电机闭环，但不反馈到数控系统，这种驱动器在某种程度上可称为开环控制的伺服控制。
A kind of the pulse control mode, the drive and motor closed loop, but not to the numerical control system, the feedback device, in a sense, can open loop control called the servo control.
本文设计了基于DSP56F805，由速度和电流反馈控制回路构成的伺服系统实时仿真软件，并给出了其设计和编制过程。
This paper illustrates the emulation software architecture of the system based on DSP56F805. The design and implementation of the speed and current feedback loop are described in detail.
提出一种具有神经网络补偿的状态反馈控制方法并用于液压伺服位置控制系统。
This paper proposes a state feedback control strategy with a neural network compensator, which is applied in a hydraulic position servo system.
并就机械手伺服控制系统的速度调节、位置检测与反馈、各关节动作的协调等方面的设计作了说明。
Meanwhile, the speed regulation, position detection and feedback, movement coordination of each joint in the servo control system of this manipulator are described in the article.
设计的灰色反馈线性化控制系统可以实现间接磁场定向感应伺服电机来跟踪速度给定。
The designed grey feedback linearization control system was implemented in an indirect field-oriented induction servo motor to track speed commands.
论文详细介绍了伺服控制的经编电子送经系统的开发过程及送经反馈偏差和停车横条与电子送经系统的关系。
This paper introduces the development of the servo control electronic yarn feed system and analyzes the warp knitting machine's let-off feedback deflection and the.
基于变极点状态反馈控制理论，对电液力伺服系统进行了数控软硬件的工艺设计及其实现。
Based on the theory of variable pole state feedback control, this paper makes the process design and implement of NC software and hardware on electro-hydraulic force servo system.
系统提出采用闭环位置伺服控制，建立跟随误差和数字反馈的模型和算法。
The system proposes the application of a closed loop position servo control and sets up a model and algorithm of er ror tracing and digital feedback.
一种采用脉冲控制方式，此种驱动器与电机闭环，但不反馈到数控系统，这种驱动器在某种程度上可称为开环控制的伺服控制。
A kind of the use of impulsive control mode, the drive and motor closed loop, but not feedback to the numerical control system, this drive, in a sense, can open loop control called the servo control.
针对单回路电液位置伺服系统的动态特性，提出了一种等效流量反馈的控制方法，从而实现了串级控制。
This paper studies the dynamic characteristics of Electro hydraulic Position Servo System, and proposes a method of equivalent flow feedback to realize serial control.
其基本组成包括加工程序、数控系统、伺服系统、辅助控制设备、反馈系统及机床本体等。
The equipment composing concludes processing program, numerical system, servo system, assistant control device, feedback system and machine tool.
针对舰船柴油机的振动隔离问题，本文对液压伺服隔振系统反馈控制理论进行了研究，建立了双层隔振系统的理论模型，用传递函数分析法推导出系统力传递率。
As far as the issue of vibration isolating of ship, this paper studies the feedback control theory of hydraulic servo isolation mounting and sets up the theory model of two_stage isolation mounting.
基于这种情况，本课题提出了基于负载自适应的流量伺服阀和电液比例溢流阀双阀反馈补偿控制方案。
So a new design scheme about double valve compensation feedback control system based on adaptive load is proposed.
为解决双转子涡喷发动机多变量系统的控制问题，采用了输入变换和状态反馈的方法，并对解耦后的系统设计了伺服跟踪控制器。
The input transform and state feedback are used for multivariable control system, and the integral servo tracking controller is designed for the decoupled systeins.
而机器人控制系统将对接收回来的反馈信息拆包解密，结合机器人的当前状态，运用视觉伺服机器人数学模型控制机器人到达相应的位置。
The robotic control system will drive the robot to the proper position according to the feedback data and the current state of the robot.
伺服系统由多个子系统组成，如位置控制器、速度控制单元、位置反馈装置等。
One servo system consists of several subsystems such as position control, velocity control and feedback of position.
针对典型电机伺服系统的性能要求，提出一种基于复合非线性反馈(CNF)控制和扩展状态观测器(eso)的控制方案。
A new control scheme was proposed, which combines a composite nonlinear feedback (CNF) control technology with an extended state observer (ESO).
针对典型电机伺服系统的性能要求，提出一种基于复合非线性反馈(CNF)控制和扩展状态观测器(eso)的控制方案。
A new control scheme was proposed, which combines a composite nonlinear feedback (CNF) control technology with an extended state observer (ESO).
应用推荐