本文考虑了一类较一般的塞流反应器模型。
In this paper, a class of more general plug flow reactor model is discussed.
本文讨论化工中连续搅拌反应器模型的控制问题。
The paper deals with the control problem of the continuous stirring reactor model.
采用一维拟均相绝热径向反应器模型模拟乙苯负压脱氢径向反应器。
An one dimensional homogenous adiabatic fixed bed reactor model was adopted to simulate a radial flow reactor for dehydrogenation of ethylbenzene to styrene under vacuum.
并把非等温过程模型的搅拌反应器模型和估计算法应用于实验装置上。
The models of the non-isothermal CSTR and estimating algorithms have deen verified successfully at a pilot plant.
以摇瓶发酵为基础，建立了两种反应器模型，探讨了间歇式发酵的产酸速率、周期和发酵次数等因素。
On the base of the fermentation in shaking table, two reactor model were made up. About intermittent fermentation the factors: rate of produce acid, cycle, number of times were investigated.
利用化学反应器模型及理论可以定量地描述动物的消化过程，阐述动物采取的消化对策和分析食物的消化动力等。
Chemical reactor model is very useful to characterize the animal gut quantitatively and help us to interpret the digestive strategies of animals.
用蒙特卡罗法和有限元相结合方法对加氢精制反应器模型进行5000次抽样，并对其可靠性和灵敏性进行分析。
The reliability and sensitivity of The hydrogenation refined reactor were analyzed through 5000 samples Monte-carlo and finite element method.
该试点阶段的质量模型反映，在一个反应器运行，我们预期的运行长度。
The quality model of the pilot phase reflects, over the run length of a reactor run, what we anticipated.
软件以环氧乙烷反应器神经网络模型为核心，包括训练、回忆、预测及说明四个部分。
The ANN model of oxirane reactor is the core of the software, and training, recalling, predication and illustration are included.
从流体微元出发，用计算流体力学（CFD）的方法建立热管生物反应器的传热数学模型。
Using the fluid differential unit, the heat transfer mathematic model of heat pipe bioreactor (HPBR) was established by the calculated fluid hydrodynamics (CFD).
建立了此反应器的二维拟均相模型，用正交配置方法离散后求解了床层的径向与轴向温度及浓度分布。
Orthogonal collocation method was used to discretize the two dimensional pseudo-homogeneous model used and the temperature and concentration profiles were calculated.
本文介绍了当前多相光催化反应体系中反应动力学模型以及反应器数模研究领域内的主要方法及成果。
This article introduces the main existing methods and achievements in the field of the math models of reaction kinetics and reactor of the heterogeneous photocatalysis reaction system.
数学模型是优化固态发酵反应器的设计和操作的重要工具。
Mathematical models are important tools for optimizing the design and the operation of solid fermentation bioreactors.
应用所提出的数学模型，对自吸气环流反应器的放大方法进行了讨论。
By applying the proposed mathematical model, the scale-up method of the self-suction reactor was discussed.
近年来，由于新型反应器的研制和先进数学模型的建立，固态发酵技术的研究取得了很大成就。
In recent years, great achievements in solid fermentation have been made due to the development of new bioreactors and the foundation of advanced mathematical models.
所有这些实验结果均与前文提出的生物反应器设计模型具有很好的一致性。
All the experimental data are in excellent agreement with the bioreactor design model developed in the previous paper.
文中针对圆管式径向对称流向变换反应器三维模型，利用交替方向隐式方法(adi)建立新的求解格式。
A new computational scheme was developed to solve a three-dimensional model of a periodic flow reversal reactor by ADI alternating direction implicit method.
利用不变区域方法，证明了二氧化硫催化氧化管式反应器流向变换强制操作模型整体解的存在性和一致有界性。
The existence and uniform boundedness of the global solutions of the model for sulphur dioxide oxidation in a tubular reactor with periodic flow reversal are proved by the invariant domain method.
近年来填充床反应器CFD数学模型韵几个研究重点是动量交换系数、毛细管压力以及床层空隙率的非均匀分布性。
Several of the focuses of CFD model in packed-bed reactors were studied, namely, the momentum exchange coefficient, the capillary pressure and the void fraction.
一种循环管式反应器的扩散模型，归结为一类特殊的边值问题，其特点为两个端点的函数值出现在一个边界条件中。
Recycle tubular reactor model with axial dispersion leads to a special boundary value problem, in which one boundary condition involves the values at two end points.
引入莫诺特方程建立了反应器基质降解的数学模型，并测出其动力学参数。
Using monod equation built mathematical model describing organic compound degradation in reactor and measured its dynamics parameters.
文中介绍一种适合于工程应用的电站锅炉炉膛三维传热值计算的反应器网络综合模型；
The present paper deals with a reactor network comprehensive model for the engineering use orented three dimensional heat transfer numerical calculation of utility boiler furnaces.
涡轮反应器内流场数学模型的建立。
The constituting of maths model of flow filed of interior reactor.
综述了聚酯聚合过程中各个阶段及其影响或控制因素、聚酯缩聚反应器、以及聚酯缩聚反应模型等。
The latest progress in polymerization process and technology for polyester was reviewed. The polymerization process and major factors, reactors and reaction models of polycondensation were discussed.
本文提出了轴向流固定床反应器的流动模型和基本方程。
In this paper, the flow model and basic equations in axial flow fixed-bed reactor are given.
运用径向基函数网络结合偏最小二乘回归的方法建立了甲醇合成反应器出口甲醇含量的预测模型。
A prediction model of methanol content at the exit of methanol synthesis reactor was proposed through radial basis function networks and partial least square regression approach.
提出了非绝热式固定床反应器基于改进混合模型的串级非线性推断控制策略。
A new cascade nonlinear inferential control strategy for a nonadiabatic fixed bed reactor based on improved hybrid model is proposed.
利用人工神经网络的方法建立了工业合成丙烯腈流化床反应器的数学模型。
In this paper, a mathematical model is developed for an industrial acrylonitrile fluidized bed reactor based on artificial neural networks.
本文报导了在微型反应器中用模型化合物甲苯及正辛烷表征催化剂的加氢-脱氢及加氢裂解功能的方法。
Hydrogenation-dehydrogenation and acidic functions of hydrocracking catalysts were characterized by the use of model compounds of toluene and n-octane in a microreactor.
本文报导了在微型反应器中用模型化合物甲苯及正辛烷表征催化剂的加氢-脱氢及加氢裂解功能的方法。
Hydrogenation-dehydrogenation and acidic functions of hydrocracking catalysts were characterized by the use of model compounds of toluene and n-octane in a microreactor.
应用推荐