并对双圆弧齿轮的成形过程提出了自己的见解。
The forming process of the double -circular -arc gear is put forward in this article.
模型的建立为解决双圆弧齿轮动载荷问题提供了依据。
Mostly conforming to the actual gearing and loading conditions, the model sets a basis for solving the dynamic problems of double-arc gears.
计算分析结果为双圆弧齿轮的设计和使用提供了理论依据。
The results provided theoretical basis for the design and application of double-arc gear.
二级分流式双圆弧齿轮减速箱结构参数对其振动特性有一定的影响。
The structure parameters have some relation with the vibration behaviors for the reducing box with two stage split flow Novikov gear of with double circular arc tooth profiles.
在此基础上，本文给出了双圆弧齿轮传动的小振动、低噪声设计准则。
On this basis, a design criterion of small vibration and low noise for the dual circular-arc gears is given out in this paper.
然而，我国对硬齿面双圆弧齿轮传动承载能力及可靠性的研究尚属起步。
However, research on loading capacity and reliability of this kind gear is still at initial stage.
叙述了准端面双圆弧齿轮的形成原理，推导了这种齿轮的通用齿面方程。
Theory of quasi-circular-arc gear's shaping is discussed in this paper, and its common tooth-surface equation is developed.
并根据相关文献给出ZY - 1型双圆弧齿轮基本齿廓的详细参数取值表。
And in accordance with the relevant literature, the detailed parameters table of the ZY-1 type double-circular-arc gear basic tooth profile is given.
介绍并推导双圆弧齿轮在安装误差影响下接触迹间载荷分配的计算公式和方法。
The load assignment formula and the method of the double circular arc gear under the wiring error influence between the contact mark was introduced and inferred.
该模型为双圆弧齿轮的三维数字化设计、有限元分析、虚拟制造等奠定了基础。
The model establishes the base for the 3D digital design, analysis of the finity unit, dummy manufacture of the double-circular-arc gear.
本文用回归分析法求得了GB12759—91型双圆弧齿轮的齿腰应力的计算公式。
A formula is given to calculate the stress in tooth middle of GB12759-91 double circular-arc gear via regression analysis in this paper.
试图用尽可能快的速度、单、懂、行的方法设计出技术经济效果最佳的双圆弧齿轮传动。
It tryes to design double arc gear transmission of the best technology and economy effect making the best of speed, simpleness and understandability and feasible method.
双圆弧齿轮减速器中心距和传动比分配的确定，直接影响减速器承载能力、重量和体积。
The selection of center distance and gear ratio distribution for a reducer with double-circular-arc gear will have a direct effect on its size, weight and loading capacity.
并且证明，法面双圆弧齿轮的每一段端面齿廓都是对应椭圆曲线段在相对运动中的包络曲线。
Moreover, the extreme shape of the normal double circle gearing proves to be the involved curve of the corresponding ellipse.
为此，郑州机械研究所针对低速重载齿轮传动领域设计了ZY-1型硬齿面双圆弧齿轮齿形。
Aiming at heavy duty and low speed gear transmission, Zheng Zhou Research Institute of Mechanical Engineering puts forwards ZY-1 case- hardened double-circular-arc gear.
本文详细地推导出加工双圆弧齿轮的砂轮截面廓形的计算表达式、并研制了通用的计算程序。
The expression of the axis section profile of grinding wheel used to machine double-circular-arc gear is derived in detail. And the general calculator program is developed.
试图用尽可能快的速度、简单、易懂、可行的方法设计出技术经济效果最佳的双圆弧齿轮传动。
It tryes to design double arc gear transmission of the best technology and economy effect making the best of speed, simpleness and understandability and feasible method.
通过本文工作，得出中心距误差对准端面双圆弧齿轮敏感性小于其对法面双圆弧齿轮的敏感性。
Through this work, the paper conclusion has confirmed the theory which sensitivity of center-distance tolerance on the Quasi-transverse-circular-arc gear less than normal circular gear.
双圆弧齿轮齿端修形是减小啮入冲击、降低传动噪声、避免齿端崩角、提高使用寿命的有效措施。
The tooth end relief is an effective process for double circular arc gear to lighten the shock, lower the meshing noise, and prevent the tooth end from breakage, so as to prolong the service life.
该模型为双圆弧齿轮三维数字化设计、制造，啮合分析、运动学和动力学分析提供了新的理论依据。
This model offers a new theory for 3d numerical design, manufacture and the analysis of engagement, kinematics and dynamics of double circular arc gears.
本文主要对双圆弧齿轮传动的载荷分配、静念啮合和动念啮合的接触及弯曲应力的分析模型和计算方法做了研究和探讨。
This paper primarily represents the study and discussion about computing methods and modeling of load share of contact stress and bending stress of static mesh and dynamic mesh of DCAHG.
计算分析认为，双圆弧齿轮的啮合点分布情况是齿轮的轴向周节、同一轮齿上两啮合点在轴向的距离和齿轮的有效宽度的函数。
Analysis shows that the distribution of meshing points is a function of the axial circular pitch, the axial space of two meshing points on a tooth and the effective width of the gear.
设计了一种新型双螺杆磨浆机传动系统的结构，提出了在双螺杆磨浆机传动系统中运用双圆弧齿轮的设计思路，设计并校核了双圆弧齿轮的具体参数。
A new structure of the transmission system of BIVIS is designed, and the design idea of using the double circular tooth gear in transmission system of BIVIS is proposed.
根据模糊数学和可靠性设计理论，建立了双圆弧齿轮传动的模糊可靠性设计的数学模型，探讨了其计算方法，并结合实例进行了具体的模糊可靠性设计。
Based on the Fuzzy mathematics and the theory of the reliability design, the mathematics model of the Fuzzy reliability design of the double circular-arc gearing is established.
用有限元方法，对双圆弧弧齿锥齿轮沿齿长方向齿根应力进行了计算。通过应力计算结果的分析，得出了凸、凹两齿侧应力沿齿长的分布规律。
Through the calculation of the finite element method(FEM) models for double circular arc profile spiral bevel gear, the stress changing pattern along the length of the tooth is obtained.
双圆弧弧齿锥齿轮是将点啮合制圆弧齿轮传动形式运用到锥齿轮上的成功例子。
Its basic gear tooth profile is double circular arc spiral bevel gear tooth profile.
本发明的名称是由双圆弧和渐开线组成的不对称齿形的齿轮传动。它属于机械领域。
The present invention relates to mechanics, and is one kind of gear with different bearing capacity for forward and reverse force transmission.
本发明的名称是由双圆弧和渐开线组成的不对称齿形的齿轮传动。它属于机械领域。
The present invention relates to mechanics, and is one kind of gear with different bearing capacity for forward and reverse force transmission.
应用推荐