由于水分子及结构材料的介电值之间有极大差异，因此在结构材料中即使有少量水分子都能被探测出来。
Since there is a great difference of dielectric constant value between water and building materials, a very small amount of water molecule in the structure can be easily detected.
本文利用高度非线性有限元分析软件MARC分析轿车行李箱密封条唇边的起皱问题，并对其结构及材料进行了优化。
Corrugation problem in the car trunk sealing strip edges is analyzed with the highly non-linear finite element analysis software (MARC). The structure and material is optimized.
针对奥迪轿车消音器的材料、结构及接头形式，研制了适用于消音器焊接的熔化极气体保护自动焊设备，并对焊接工艺进行了研究。
In order to solve Audi car muffler welding problems, a MIG automatic welding process and equipment arc developed which is suitable for the material, structure and joint type of the muffler.
具有纳米晶、过饱和固溶体等亚稳态结构的材料具有独特的物理、化学及机械性能，因而在诸多领域获得了广泛的应用。
The materials with metastable structures, e. G., nanostructure and supersaturated solid solutions, have unique physic, chemical and mechanical properties, and get extensive application in many fields.
片型刀结构于爪刀、平刀之间，适合破碎普通片材，管材，型材，板材及包装材料等塑料制品。
Slice type blade structure between the claw blade, flat blade, is suitable for crushing ordinary sheet, pipe, profiles, sheets and packaging materials such as plastic products.
在研究其准直原理及理论计算基础上，讨论了材料和结构参数对准直特性的影响。
The optical principle and the effects of material and structural parameters on collimating properties are studied theoretically.
本文对其使用场合、结构特点及材料选用作了扼要的介绍和比较。
The article makes a concise introduction and comparison to its application situation, the construction characteristics and the materials being used.
简介现代数控刀具科普知识和近几年来在刀具材料、结构科技领域里的现状及发展趋势。
The paper briefly introduces scientific knowledge of modern NC cutting tools and presents a review of NC tools' material and structure in recent years.
如有需要，对工厂承诺的改进方案(如材料，流程，产品结构改进等)进行跟踪及检验。
If needed, follow-up the improvement actions from supplier like material, process, construction improvement etc.
探讨了羟基磷灰石生物活性陶瓷的制备工艺对材料结构稳定性及力学性能的影响。
The influence of preparation techniques of hydroxyapatite bioactive ceramics on their structural stability and mechanical property were studied.
本文介绍了改性双马来酰亚胺树脂的分子结构与性能，及复合材料的模压成型工艺。
This text introduced molecular structure and performance of modified BMI resin, and mould pressing craft of the composite material.
介绍了F4112离子交换膜的材料结构、性能参数及膜电阻、膜中扩散系数的测定方法。
The determination of material structure, performance parameters and membrane resistance, membrane diffusion coefficient of the F4112 ion exchange membrane were introduced.
本文从技术逻辑出发，分别从结构及材料技术、建造技术和设计技术三个方面去分析这些技术对建筑形式的影响。
This paper analyses the form of architecture in three aspects in the logic of technology ----materials & structure technology, built technology, and design technology.
聚合材料具有一些重要特性，包括尺寸(或分子量)、软化及熔化点、结晶度和结构。
Some important characteristics of polymers include their size (or molecular weight), softening and melting points, crystallinity, and structure.
简要介绍经济型金属零件LOM技术倾斜切削的概念，重点对倾斜切削专用铣刀的材料、结构及几何参数进行了研究。
This paper briefly introduces the concept of oblique cut in economical LOM for metal part, mainly researches on material, structure and parameters of special oblique milling cutter.
耐火阻燃经国家权威机构检测该材料为级不燃性材料，用其构成的墙体及钢结构保护耐火极限远远高于国家标准。
Fireproof The material is A class frameless one tested state authority institute. The water absorb and max fire durability meet the demand for light inner partition completely.
压制火炮中，模块装药以其模块化的装药结构特征及模块材料参与发射过程的装药组成特征，不同于传统的装药方式。
In the gun howitzers, the modular charges are different from the traditional charges in the characteristics of the modularized charge construction and the compositions of modular materials.
分析了电流线圈骨架零件的结构特点及材料成型特点，介绍了该零件的注射模具设计方法。
After analysing the features of the structure of current coil skeleton parts and material formation, the paper introduces the injection die design method of this part.
在所有结构用金属及合金材料中，镁的密度最低。
In all structural metal and alloy material, the density of the magnesium is the lowest.
文章介绍了相变存储材料的特点，工作原理，相变材料结构及面临的技术难题。
The basic principle of operation, significant advantages, material structures, existent problems and latest progresses of the phase change materials are discussed in the review.
扫描电镜下观察各组材料表面结构及细胞附着情况。
The surface structure of materials and cell adherence in all groups were observed under scanning electron microscope (SEM).
简要讨论了压电变压器的工作原理和结构及压电材料的选择。
This paper gives a brief discussion to the principles and structure of piezoelctrictransformer and to the choice of piezoelctric materials.
结果表明本文采用的分析复合材料结构耐撞性能的模拟策略和方法及建立的有限元模型是合理可行的。
The results are compared well with the experimental data that in turn verifies the proposed numerical simulation strategy and method.
介绍了铸造用原辅材料工艺定额的方法和材料定额管理系统的结构及功能。
The method of technological rating of material used in foundry and the structure of the management system were introduced.
本文就主要的介入治疗器材及材料的结构、特性、用途等进行论述。
This article expounds on the structure, the characteristics and use the main interventional therapy materials.
本文介绍了测量金属及非金属材料厚度的测厚电离室系列的原理、结构及各种性能。
This paper introduces the principle, construction and performances of ionization Chambers for measuring the thickness of metal and nonmetal materials.
本课将通过一系列实验，向学生介绍结构材料的基本性能和简单结构杆件及体系的受力表现。
This course introduces students to basic properties of structural materials and behavior of simple structural elements and systems through a series of experiments.
发现不同的热处理工艺可以改变合金材料的结构及相组成，从而明显地影响该合金的磁性能。
It concludes that annealing processes may change the structure and phase formation of the alloy, and consequently effects the magnetic properties of the alloy.
使用这种测量方法，得到的数据准确、可靠，对材料的物性及材料结构的研究有着十分重要的价值。
With this method, the data is accurate, reliable and it is valuable in studying the feature and structure of materials.
使用这种测量方法，得到的数据准确、可靠，对材料的物性及材料结构的研究有着十分重要的价值。
With this method, the data is accurate, reliable and it is valuable in studying the feature and structure of materials.
应用推荐