通过改性环氧树脂及固化剂，实验研究了浸渍胶的粘度、韧性及耐冷热冲击性、浸渍性。
A sort of modified epoxy resin and curing agent in terms of its viscosity, tenacity, cold-proof and heat-proof impinge and dipping properties were described.
采用二步法，研制成重防腐粉末涂料用的环氧树脂及固化剂，其主要性能指标达到国外同类产品水平。
By use of two-step process, an epoxy resin and hardener for heavy duty powder coatings have been developed, the main technical specifications reached the similar standard of products abroad.
所谓复杂化学文联型聚氨酯网络是指固化体系中含有官能度大于4的预聚物及固化剂固化形成的交联网络。
The complex chemical crosslinking PU network means that a PU network is cured from the curing system which includes the prepolymer and curing agent with the functionality more than 4.
对e - 20进行了填料改性及固化剂配置，并且通过正交试验与极差分析，对涂层性能作了较为深入的研究。
Orthogonal test and range analysis are used to study the performances of coatings when combined with different modified fillers and curing agents.
有机耐磨防腐涂料该涂料是由几种耐腐蚀，耐磨损的陶瓷骨料，环氧树脂，改性的聚氨脂树脂，固化剂，及少量添加剂配制而成。
Organic Anticorrosive coating The coating are preparation with a series ceramic powders, epoxy resin, modified polyurethane resin, solidification agent and a few additive.
本文着重从银粉的粒度、添加量和固化剂的种类、用量以及固化条件等方面研究和探讨了环氧-低分子聚酰胺-银粉导电胶体系的导电性及强度。
In this paper the effect of size of silver particles, proportion, curing agent and curing condition on epoxy resin - low - molecular polyamide - silver particles system are studied and discussed.
同时创新性的发现并采用硫磺作为该环氧树脂的固化剂，并对该体系的双固化特性、固化机理及硫磺与其它固化剂的复配效果进行了深入的研究。
And innovatively adopting sulfur as the curing agent of epoxy and deeply studying on the double-curing behavior, curing mechanism and the cooperating effect of sulfur and other curing agent.
采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。
Using lead benzoxy as curing agent, cured epoxy resin was analyzed by means of IR spectrum and DSC curves. Lead benzoxy was considered to be catalytic curing agent.
微胶囊型固化剂，其制备方法，热固性树脂组合物，预浸渍物及纤维增强的复合材料。
Microcapsule-type curing agent, method for producing the same, thermosetting resin composition, prepreg and fiber reinforced composite material.
该成果同时也为其他涂料用固化剂中异氰酸酯游离单体的脱除及非涂料行业同类产品异氰酸单体的脱除开辟了一条新路。
The results also open a new path for the removal of other coatings with curing agent in isocyanate monomer and the removal of isocyanate monomer of non-paint industry.
本文探讨了聚氨酯胶粘剂几种固化剂的合成及甲苯二异氰酸酯(TDI)三聚体的固含量、用量等对不同类型的聚氨酯胶粘剂初粘力的影响。
In this paper, several curing agent of polyurethane were synthesized. Influences of solid content and dosage of TDI tripolymer on different PU adhesion high initial bonding strength were discussed.
环脒在催化剂和固化剂方面的应用及聚脒的一些应用。
Application of cycle amidines on the catalyzer, solidifying agent and the application of polyamidines.
研究了DCPD酚环氧树脂与酸酐及胺类固化剂的固化反应活性。
It was studied on the curing activity of DCPD phenol epoxy resin with anhydrides and amines.
并对re树脂、固化剂及各种填料对胶粘剂性能的影响进行了较详细的论述。
And the influence of re resin, curing agent and various fillers on the putty properties are discussed in detail.
讨论了制备用作压裂支撑剂的树脂覆膜砂使用的树脂和固化剂的选择、包胶设备及工艺。
The selection of resin and curing agent and the equipment and the technology are discussed for manufacturing resin coated sand as proppant for hydraulic fracturing.
第二部分包括要达到需要的粘度所要 求的类型及数量的固化剂和粒状填料。
The second part includes a curing agent and a particulate filler of a type and amount required to achieve the desired viscosity.
由优质环氧树脂、改性胺固化剂及活性稀释剂制成；
Use solvent free epoxy resin and high quality epoxy diluents andcuring agents.
并用该树脂与固化剂、惰性添料配制了胶泥，测试了其常温、热处理及腐蚀后的胶泥的力学性能、腐蚀率及焦化时间。
The dynamic performance, corrosion rate and coking time of the mortar were tested under normal temperature and after heat treatment and corrosion individually.
简要介绍了固化剂的选择、不同增韧剂的优劣及活性填料等材料对胶粘剂力学性能的影响。
This paper concisely introduced the effects of the choice of curing agent, the flexibilizer quality and the active filler on the mechanical properties of the adhesive.
玻璃耐酸胶泥由水玻璃、固化剂及粉状填料组成。
Acid-resistant glass cement is composed of water glass, curing agent and powder filler.
为了提高合成树脂及聚氨酯固化剂的质量，采用抗氧剂控制其色泽是行之有效的方法。
In order to upgrade the quality of the synthetic resins and PU curing agent, an effective practice is to use the antioxidant to control their color during production.
研究了固化剂用量及丁腈羟用量对粘接性能的影响及这种增韧环氧树脂的玻璃化转变、动态力学性能和电性能，并对反应机理进行了初步探讨。
The effects of the amounts of curing agent and HTBN on the adhesive properties, as well as glass transition temperature, dynamic mechanical properties and electrical properties were investigated.
本文研究了不同固化剂ddm,DDBA和DDS及不同固化反应条件对液晶环氧浇铸体性能的影响，采用扫描电镜分析了微观结构。
The effects of curing agents, such as DDM, DDBA, DDS and technology on properties of liquid crystalline epoxy resin have been studied. The microstructure have been observed by SEM.
本文讨论以水泥作固化剂的深层搅拌桩的设计、施工工艺及质量控制问题。
This paper discusses the problems of the design, construction craft and quality control of plutonic mixing pile.
本文介绍高性能彩色固化剂及彩色印模辅助材料的组成特性、生产工艺及印模技术。
In this article, the component characteristic of HPCH and secondary cementitious materials, productive techniques and moulage technology are introduced as a whole.
用不同掺量的HAS固化剂来固结粉煤灰、石屑及煤渣进行性能试验。
By mixing hardening agent HAS of different quantity with fly ash, stone bits and slag, some tests are carried out.
结果表明该类聚酰胺固化剂具有较普通聚酰胺固化剂粘度低、粘接强度大、韧性大及耐热性好等优点。
It was found that this kinds of polyamides had advantage such as low viscosity, stronger adhesive strength, high flexibility and good heat-resistance over the ordinary polyamides.
在低分子聚酰胺树脂固化环氧树脂的体系中 ，通过添加一定量的酚醛胺固化剂 ，直接影响该体系的表观及固化物力学性能。
The aperance and the mechanic properties of epoxy resin and low molecular polyamide adhesive system would be affected by the addition of mannich amide.
结果表明，键合剂的效能与键合剂和粘合剂的互溶性、粘合剂的链段结构、粘合剂的活性基团和固化剂的反应速度及它们的相互作用等方面，有强烈的相关性。
The results have shown that the function of the bonding agent has a strong correlation with miscibility between the bonding agent and the binder, chain structure of th...
一种固化剂4,2-及4,4-二苯基甲烷二异氰酸酯预聚物及其制备方法。
Curing agent 4, 2 '- and 4, 4' -methyl diphenylene diisocyanate prepolymer and preparation thereof.
应用推荐