应用砂岩的毛细管压力曲线（压汞法）资料定量研究砂岩孔隙空间结构特征参数，以便更好地进行砂岩评价。
Sandstone evaluation can be better carried on, using sandstone capillary pressure curve(pressuring mercury way) data to quantitatively study sandstone pore structure characteristic parameters.
压汞法是定量研究砂岩孔隙空间结构特征参数的一种新方法，与铸体图象法相比，更具定量研究价值和实用价值。
The pressuring mercury way is a new method to quantitatively study sandstone pore structure characteristic parameters. It has better quantitative and practical value than image way.
研究了非线性参数系统模型的识别问题，通过引入求解线性方程组的松驰法思想，构造了一类新的迭代识别算法。
A nonlinear system parameters identification problem is investigated in this paper by introducing a relaxation method used for solving the linear equations of the system.
根据相似原理，利用量纲法推导试验函数方程。通过试验对机构参数间关系进行研究并进行预测。
A functional equation can be calculated by dimension on the basis of the similar principles of crab claws, and the relation between the mechanism parameters is studied and calculated by tests.
研究了具有参数优化的核函数法及其在聚类问题中的应用。
It studies kernel function method with parameters optimized and its application in pattern clustering.
目的：研究大孔树脂吸附法富集保和丸中有效成分的工艺条件及参数。
Objective: To study the technological parameters of the enrichment purification process of Baohe Pills with macroporous resin.
在结构损伤识别的时域法研究中，数值积分的误差将直接影响反演参数结果的精度。
In study on structure damage identification in time domain, error of numerical integral will affect directly accuracy of parameters resulted from reversion.
采用有限单元法对轧辊辊齿的应力状态进行了研究，得出了不同结构参数对轧辊应力变化的影响。
The paper presents the research into the stress state of roller teeth using FEM (finite element method). The results show that different structure parameter causes a change in roll stress.
对运放参数测试的自动校零方法、测试主回路的闭环稳定性进行了研究。
This paper describes the automatic null-setting method for Op-Amp parameters measurement and the stability of the main measurement loop.
本文考察和研究了脉冲电镀及周期换向电镀法中各项脉冲参数对钯-镍合金的镀层成份、电流效率的影响。
The effects of pulse and periodic current parameters on the composition of Pd -ni alloy deposit and on the current efficiency of the electrodeposition process have been studied.
提出了研究绕组变形的结构参数法。
The structural parameter method was used to study the winding deformation.
选用正交试验法，研究了A356铝合金近液相线半连续铸造工艺参数的影响。
Studying the nearby liquidus semi -continuous casting technics of A356alloy by means of orthogonal test.
通过应用瑞利里兹法研究了分层椭圆几何参数和缝线等效弹性系数对压缩屈曲载荷的影响。
The effects of geometry parameters of ellipse and stitching thread on buckling loads are investigated by Rayleigh Ritz energy method.
本实验采用超滤法分离发酵乳中的ACE抑制肽，研究了超滤工艺的主要技术参数。
In this experiment, the ultrafiltration technology of ACE inhibitory peptides derived from fermented milk was studied.
基于改进的单纯形算法和残数法，对药物动力学房室模型中的有关参数计算进行了研究。
By using improved simplex method and residuals method, a calculation based on the parameters of compartment model of pharmacokinetics is presented.
采用适合离散函数的网格法研究小麦籽粒的长度、宽度、厚度、单粒质量等参数间的分形特性。
Fractional characteristics between length, width, thickness and weight of a single kernel were studied by using net method that adapted to the discrete function.
详细研究了激光反射光声法的测定原理、实验装置及影响参数。
The principle of laser reflection photoacoustic detection, its experimental setup and the influencing parameters are described.
本文着重研究了在实际施工中，利用卡尔曼滤波法进行参数估计的具体做法。
In this thesis, the specific parameter estimating by Kalman filter method was investigated under actual construction.
用一级反应的热动力学无量纲参数法研究了环氧氯丙烷的酸催化水解反应。
The acid-catalyzed hydrolysis of epichlorohydrin is studied with the method of dimensionless parameter for the first order reactions In this paper.
本研究采用蒙特卡洛法模拟一组两参数韦伯分布函数，生成逐日平均风速。
In this paper, the average daily wind speed is generated from a set of two parameter Weibull distributions by Monte Carlo method.
以不同前角刨刀切制两种杨木和柞木刨片，根据参数分离法，对其流变性能进行了测定和研究。
Rheological properties of the flakes of poplar and oak woods cut with knives of various rake angles were studied by applying the method of parameter separation.
针对方孔翻边问题进行了编程式参数化有限元法研究，其结果与现有文献试验结果基本吻合；
The programming PFEA approach is researched by square hole flanging, and the result accords with the experimental result from publications.
由于在国内尚无法得到长周期逐时温度参数，关于温频法气象参数的研究和应用相对缺乏。
Since the long term temperature records are not available in China, there is a lack of BIN weather data for study and application.
国内外对此的研究，主要有集中参数法(我国防雷规程采用)、直接测量法及电磁场法等方法。
There are collective parameter method which is adopted in lightning protection rules, direct measurement method, electromagnetic field method and so on.
本论文的研究对象是房地产估价中收益还原法使用的重要参数还原利率。
The object of this thesis is the important parameter return rate of income capitalization approach in real estate appraisal.
利用模拟软件，运用正交试验法对影响预冲工艺孔板料成形性能的参数进行研究，得出各参数对该情况下成形性能影响程度的规律。
The paper studies the parameters affecting the forming of sheet with punching hole by simulation software and orthogonal experiment, and concludes the law of the parameters affecting the forming.
通过对铣削知识的整理分类，对产生式知识表示法和面向对象知识表示法在铣削参数专家系统中的应用进行了研究。
By classification of the milling knowledge, this paper researched the application of object-oriented knowledge representation in the milling parameter optimization expert system.
通过对铣削知识的整理分类，对产生式知识表示法和面向对象知识表示法在铣削参数专家系统中的应用进行了研究。
By classification of the milling knowledge, this paper researched the application of object-oriented knowledge representation in the milling parameter optimization expert system.
应用推荐