详细论述了参数检测系统的工作原理及系统的组成。
The working principle and system composition of the parameter test system were discussed in detail.
具体给出了参数检测系统的硬件设计及软件控制流程。
The hardware design and software flow chart of the parameter test system were give out.
解决了非接触生命参数检测系统中雷达探测方向和角度问题。
The problems of radar detection direction and angle are solved with this technology.
目的建立非接触生命参数检测系统与压阻式加速度之间的数学模型。
AIM To construct the mathematical model between the non contact detecting system for life parameters and piezoresistive acceleration sensor.
采用单片机开发了用于三次采油的多功能三元注入泵综合参数检测系统。
Multifunctional three-injecting-pump detecting system suitable for testing comprehensive parameters in tertiary process was designed using MCU.
此功率因数监测与补偿系统由电参数检测系统和补偿控制系统两部分组成。
This power-factor monitoring and compensation system was made up of electrical parameters detection system and compensation controlling system.
随着电气化铁路的飞速发展，对接触网参数检测系统的需求呈现出多样化和普及化的趋势。
With the development of electric railway, the needs of catenary's parameters inspection system are various and popular.
结合JSL - 30型钻机结构和工作原理，研制了适用于振动条件下的钻进参数检测系统。
According to the structure and operating principle of the JSL-30 drill rig, a drill parameter tester was developed especially for percussion drill.
基于线阵CCD的油管外螺纹参数检测系统是一种先进的非接触式工业检测系统，包括硬件和软件两部分。
The tubing thread measuring system based on linear array CCD is an advanced non-contact industry measuring system. It includes hardware and software.
为了分析短路过渡电弧的焊接过程和探讨电弧能量对焊接稳定性的影响，设计了短路过渡电弧电参数检测系统。
A arc parameter-measuring system was developed to analyze the process of short-circuiting arc welding and the effect of arc energy on the welding stability.
基于虚拟仪器的气力输送能耗参数检测系统可显示能耗指标与其参数的关系曲线，并得出能耗最小时的最佳参数组合。
Parameter measurement based on virtual instrument in pneumatic conveying can display curve of relation between energy consuming and its parameters, educing best combination.
本文提出了一种复合数字滤波方法及基于最小二乘原理的直线拟合方法，用于实现火炮接口参数检测系统的滤波和线性度拟合。
A compound digital filtering method and a line fitting method based on the least squares are presented, which are used in the measurement system of interface parameters of artillery.
因此，必须设法抑制由于外界作用而使非接触生命参数检测系统产生的自抖动干扰，提高信噪比，检测出人体的生命参数信号。
So it is necessary to find a way to constrain the self-dithering interference of the non-contact life-detection system and raise SNR so as to extract the life-parameter signal of human subject.
非接触生命参数检测系统由于抖动而产生的干扰，相对于人体的生命参数信号(如呼吸、心跳)而言被称作检测系统的自抖动干扰。
The interference produced by the dithering of this detecting system is called self-dithering interference relative to human life-parameter such as respiration and heartbeat.
最后我们以TMS320F 2812为核心设计了UM 71轨道信号的参数检测系统，并部分实现了移频轨道信号的检测功能。
At the last, we designed a UM71 track signal parameters detecting system base on TMS320F2812, and implemented part functions of the frequency-shift track signal detecting.
说明：尝试使用调用的一个指针参数时-系统检测到无效指针地址。
Description: The system detected an invalid pointer address when it tried to use a pointer argument of a call.
试验结果表明，本检测系统具有良好的稳定性和可靠性，能够准确地检测电控喷油器的重要特性参数。
The test results show that this test system has good stability and reliability, which can test some important characteristic parameters accurately.
整个系统不但对工艺参数取得准确检测，而且对具有非线性、滞后特性的参数得到良好控制。
The whole system not only exactly measures process parameters but also has good control performance to parameters with nonlinear, time-delay property.
本文介绍了我国第一座大型观冰测试站内试验输电线路复冰振动各种参数测试的一套自动检测系统。
This paper introduces a system of China's first large looking ice station for automatic measuring of various parameters concerned with vibration of iced conductors.
本文介绍了电参数的自动检测系统设计方案和实现办法。
The paper introduced the design scheme and realization method which foucus on the automatic detection of the electric parameter.
最后优化残差产生器的参数，使得故障检测系统对未知输入具有较强的鲁棒性，同时对故障具有较高的灵敏度。
Finally the parameter of the residual generator is optimized, so that the fault detection system is robust to the unknown inputs and simultaneously sensitive to the faults.
具体介绍工业酸度计硬件、软件组成，参数检测及处理电路的设计，系统接口设计，给出了主要技术性指标。
The hardware and software composition, the design of parameter detection and processing circuits and system interface are introduced concretely. The main specifications are given.
对实际系统进行了喷涂工艺试验，给出了不同工艺参数条件下，采用红外测温仪进行皮膜温度检测的试验结果和理论分析。
Through the experiments with different process parameters, the result of the coatings temperature measurement with the infrared thermo scope and its theoretical analysis were given.
研究具有多维诊断参数系统的可靠性和检测策略问题。
This paper considers the reliability and inspection policies for a system with multivariate diagnostic parameters.
通过控制器、参数检测、通讯管理机的工作说明系统的工作原理。
The working principle of the system is described through the introduction of the controller, parameter detection and communication management computer.
并用该系统检测了几种软组织的弹性参数。
And the elastic parameter of several soft tissues were tested with the system.
设计出基于呼吸气道流量、压力检测的呼吸力学参数监测系统电路。
The circuit of a monitoring system for respiratory mechanical parameters is designed based on the detection of respiratory flow and pressure.
介绍了一种基于光电检测技术的轮对综合参数自动检测系统。
It introduced an automatic measuring system of comprehensive parameters of wheel set based on optoelectronic detecting technique.
本文主要研究了图像测量处理技术在刀具几何参数的检测系统中的应用。
This paper mainly studied the image measurement technology in the treatment of geometric parameters of tool detection system.
本文主要研究了图像测量处理技术在刀具几何参数的检测系统中的应用。
This paper mainly studied the image measurement technology in the treatment of geometric parameters of tool detection system.
应用推荐