两相流参数检测是工业过程参数检测的一个难点。
Two-phase flow parameters measurement is a difficulty in field of industrial process parameter measurement.
详细论述了参数检测系统的工作原理及系统的组成。
The working principle and system composition of the parameter test system were discussed in detail.
具体给出了参数检测系统的硬件设计及软件控制流程。
The hardware design and software flow chart of the parameter test system were give out.
本文介绍了电力参数检测装置的硬件结构以及参数的计算。
Hardware frame and calculating all parameters are mainly discussed in the article.
解决了非接触生命参数检测系统中雷达探测方向和角度问题。
The problems of radar detection direction and angle are solved with this technology.
因此，准确的识别流型是气固两相流参数检测的一项重要内容。
Therefore, to identify flow pattern accurately is an important component of the detect parameters of the two-phase flow.
通过控制器、参数检测、通讯管理机的工作说明系统的工作原理。
The working principle of the system is described through the introduction of the controller, parameter detection and communication management computer.
其中，自旋参数检测实验和自旋磁性材料是解决上述问题的关键。
Spin injection and spin detection are the key aspects to develop semicondutor spintronics device.
但由于流体流动特性的复杂多变，使得两相流参数检测难度较大。
For the complex characters of two-phase flow, it's really difficult to accurately measure those flow parameters.
目的建立非接触生命参数检测系统与压阻式加速度之间的数学模型。
AIM To construct the mathematical model between the non contact detecting system for life parameters and piezoresistive acceleration sensor.
文章介绍一种用于X光机参数检测的C8051 F单片机的功能开发。
The paper introduces the function development a C8051F SCM used in the parameter testing of X-ray units.
本文结合实际工程对运用掘进参数检测刀具磨损的方法进行了探索研究。
The method estimating the cutter wear by analyzing the tunneling parameters is presented in this paper.
钻进参数检测对钻进参数优化、钻机设计、钻进工艺研究具有重要作用。
It is very important for drilling parameters test to better drilling parameters, design drill rig, research on drilling technology.
此功率因数监测与补偿系统由电参数检测系统和补偿控制系统两部分组成。
This power-factor monitoring and compensation system was made up of electrical parameters detection system and compensation controlling system.
棉纤维成熟度的图象分析包括输入图象的预处理，纤维轮廓的抽取及参数检测。
Image analyses on cotton fibre maturity consists of image pre-processing, extraction of contour and parameters detection.
包括基于DSP的发电机电力参数检测电路，励磁控制器以及一些系统相关电路。
The generator power parameter detection circuit, excitation controller and some related circuits based on DSP are designed.
可根据性能参数检测要求，扳动相应的功率设定开关，任意组合、设定放电功率。
You can combine any of the discharge power according the requirements of performance parameters, setting corresponding power switches.
因此，利用地震波的振幅、衰减等属性参数检测裂缝特征比利用速度参数更有效。
Therefore, seismic amplitude as well as attenuation characteristic attribute may be much better than velocity one for the detection of the fracture system.
提出了一种新的基于数学形态学的红外图像序列中弱点状运动目标的非参数检测算法。
A new nonparametric algorithm based on mathematical morphology is proposed for the detection of dim moving point target in infrared image sequence.
参数检测和带载放电同时进行，单片机控制，可自动检测三相电压、电流、频率等参数。
Parameter test and load discharge can process at one time. It is controlled by CPU, and can automatically test three-phase voltage, current and power ETC.
接触网检测车是目前最常用的接触网检测设备，在接触网参数检测中得到了广泛的应用。
Catenary Inspection Car is the most useful equipment, it is widely used in OCS testing.
视频交通参数检测中的车辆分割需要准确地检测与车辆连在一起的阴影和车灯产生的亮斑。
The shadows similar to the vehicle and the spots caused by vehicle lamps need to be accurately detected in the vehicle segmentation involved in the video-based traffic parameter measurement.
随着电气化铁路的飞速发展，对接触网参数检测系统的需求呈现出多样化和普及化的趋势。
With the development of electric railway, the needs of catenary's parameters inspection system are various and popular.
电容层析成像技术是多相流参数检测领域中的一门新技术，在工业中有着广阔的应用前景。
Electrical capacitance tomography (ect) technique is a novel technique used in parameter measurement of multiphase flow and has a wide application prospect in industry.
结合JSL - 30型钻机结构和工作原理，研制了适用于振动条件下的钻进参数检测系统。
According to the structure and operating principle of the JSL-30 drill rig, a drill parameter tester was developed especially for percussion drill.
本文提出了一种改善分布式参数检测性能的集中式最优加权融合算法，建立了该算法的数学模型。
Centralized optimal weight fusion algorithm is raised to improve the inspection characteristic of distributed parameter; algorithm model and deduction of formula are available.
针对普通电参数检测方法检测精度低、误差大的缺点，提出了一种同步采样法和基2FFT算法。
Aimed at the less detection precision and the more errors arising from the common electric parameter detecting method, this paper proposes a synchronous sampling method and radix 2 FFT algorithm.
基于线阵CCD的油管外螺纹参数检测系统是一种先进的非接触式工业检测系统，包括硬件和软件两部分。
The tubing thread measuring system based on linear array CCD is an advanced non-contact industry measuring system. It includes hardware and software.
具体介绍工业酸度计硬件、软件组成，参数检测及处理电路的设计，系统接口设计，给出了主要技术性指标。
The hardware and software composition, the design of parameter detection and processing circuits and system interface are introduced concretely. The main specifications are given.
通过编制上位机监控界面，本装置除实现特性参数检测外，还具备反力特性曲线显示与反力特性存储的功能。
It is worked out for monitor interface based on computer, which can store testing parameters and counterforce characteristics curve.
应用推荐