对原电路进行了重新设计与改装。
为此，必须对原电路进行改进。
改进原电路系统，进一步完善PLC程序。
Meliorating original circuit system and further improving PLC procedures.
所导出的全部电路具有与原电路相同的无源灵敏度特性。
The circuits have the same passive sensitivity as that of the original one.
介绍静电复印机AC驱动器的维修经验并提出用固态继电器对原电路进行改进的方法。
Introduced the repair-experience of the AC driver of the electrostatic printer and proposed the method to improve the primary circuit with the solid-state armature.
实训教学中按原电路布线时，易造成接线工艺繁琐、结构不合理，增加连接导线长度等；
In the course of teaching, the original way has its disadvantages, such as, the complicated proc ess, the unreasonable structure, the inaccurate length of wire, etc.
用高速的FPGA代替ECL集成电路制作了北京谱仪的主触发电路，其设计过程中使用了硬件描述语言VHDL，得到了和原电路同样的性能，但增加了灵活性。
Master Trigger Controller was made using fast FPGA instead of ECLIC. VHDL was used in its design. The same performance was obtained with increased flexibility. .
通过对某种调速控制器的剖析及试验，找出了原控制器使用过程中频繁烧坏功率场效应管的原因，斫制出了一种改进型控制器电路，从根本上解决了原电路存在的问题。
Analysis and test of speed controller circuit of certain electric bicycle is performed to find out the reason for a frequent burn-out of power FET of the original controller during working.
通过对某种型号电动自行车调速控制器的剖析及试验，找出了原控制器使用过程中频繁烧坏功率场效应管的原因，研制出了一种改进型控制器电路，从根本上解决了原电路存在的问题。
Analysis and test of speed controller circuit of certain electric bicycle is performed to find out the reason for a frequent burn-out of power FET of the original controller during working.
摘要：本设计是在原车喇叭电路的附加喇叭电路的基础上的一种设计。
Abstract: This design is a kind of design which based on the additional speaker circuits of the original car speaker circuit.
本公司产品型号齐全、安装方便，决不破坏原车电路。
The Company product range, easy to install, and never destroy the original car circuit.
以隔离型对称半桥双向变换器为对象，建立了以原边为参考的4种模式下的简化电路，提出了结合开关函数的状态空间平均模型的建立方法。
For isolated-type symmetry half-bridge bidirectional converter with phase-shifted control, a simplified circuit under 4 modes using the primary windings of transformer as reference object is built.
该分布式电源系统采用高频母线形式，原边电路采用双管正激电路，电压前馈控制，后级利用磁放大器精确控制。
The primary circuit has the form of double switch forward of feedforward control, the second circuit used the magnetic amplifier as the post regulator.
它们具有设计新颖、电路简单、结构合理、防振性好，维修方便等特点，其运行可靠性和主要技术指标已超过原进口产品。
They have the features of; new in design, simple in circuit, and with reasonable structure, well-vibration-proof and major technique norms have overtaken those importations.
该电路采用脉冲变压器耦合MOSFET管驱动电路，具有输出变压器原边平均电流和副边峰值电流的过流保护功能。
The circuit, with over-current protection of output transformer original side average current and side peak current, adopts pulse transformer coupling MOSFET driving circuit.
从确保发电系统的稳定性和安全性出发，对原发电系统中汽轮机的紧急停机控制电路进行了改造。
From the stability and the safety of generating system, the urgent cease control loop of the steam turbine was reformed.
提供电子电路级别维修，高于原厂维修品质的服务，减少客户等待时间，节省客户成本。
RealMeter provides electroniccircuit level maintenance, with higher quality-performance guarantee more thanthe original factory service, while with shorter service period and competitiveprice.
本文提出一个基于性能的LUT结构的FPGA的再设计算法，该算法采用特征函数以及对原布尔网络进行相应的约束实现电路的再设计。
This paper presents a performance based redesign algorithm for LUT type FPGA. The algorithm uses characteristic functions and presents a redesign method based on restriction for an original relation .
废弃电子电路板经王水溶解后，在盐酸介质中，用自制的黄原酯棉吸附。
In HCl medium, cotton cellulose xanthate absorb the solution where the abandoned electronics circuit board is dissolved by the king water.
整个校正电路为一附加的功能模块，对原接收机结构无要求。
As an additional functional module, this correction circuit requires no changes to the original structure of the receiver.
哦，我们还忘了说电路控制部分，对，还是跟原厂的一样，一个音量控制旋钮，和两个音色控制旋钮，不过我们做了些细微的调整，中间档位控制的是琴颈与中拾音器的音色，后档位控制的是琴桥拾音器的音色。
Did we forget the circuitry, sure a volume control as usual, and two tones, but the middle tone works on the neck and middle pickup, with the back tone working on the bridge pickup.
同时，将触发信号源结构、工作原理、差动光电接收电路、微珠玻璃原向反射器的工作原理也进行了详尽的论述和介绍。
Structure and operating principle of the trigger signal source and of differential photoelectric receiving circuit and scotchlite retroreflector are detailed as well.
本发明还公开了一种AC-DC变换器的控制器，包括原边采样电路和数字补偿器；
The present invention also discloses a AC-DC converter controllers, including the primary sampling circuits and digital compensator;
其结构由原边电路、聚磁环、霍尔器件、次级线圈和放大电路等组成， 分直测式和磁补偿式两种工作方式。
The sensor is made up of original circuit, magnetic core, Hall part, secondary coil and magnifier. There are two work modes: direct measure mode and closed-loop mode.
操作电路系统、温控系统由台湾原厂的专业的工程师设计，加热丝及螺杆电机由台湾原装进口，保证了机械的长时间地工作。
Electrical system and temperature controlling system is designed by professional Taiwanese engineer; Heating wires and screw motor is imported from Taiwan, to ensure long hours working of the machine.
在对原芯片进行解剖、显微照相、拼图之后提取出电路原理图。
After the original chip is dissected, photomicrographed, conjoined, the schematic is extracted.
通过本发明，既不对原LED发光效 果造成影响，同时有利于电路简化，从而降低空间占用，减少制造成本。
The invention does not influence the luminous effect of the LED, and simultaneously is favorable for circuit simplification so as to reduce the space occupation and the manufacturing cost.
结果表明：变压器层间电压分布随时间变化，且与电路外部参数如失谐、原边电容电压等存在关系。
The results show that the voltage distribution varies with time, and it is influenced by circuit extrinsic parameters such as circuit mismatch, primary capacitor voltage, etc.
用这种电路替代原721型分光光度计中的光强调节电位器即可实现自动调节光强。
While substituting the regulation-resistor for light intensity adjustment on the spectrophotometer with this device, automatic adjustment of light intensity is realized.
用这种电路替代原721型分光光度计中的光强调节电位器即可实现自动调节光强。
While substituting the regulation-resistor for light intensity adjustment on the spectrophotometer with this device, automatic adjustment of light intensity is realized.
应用推荐