用一步原位聚合法制备了电泳显示微胶囊。
Microcapsules for electrophoretic display were prepared by in situ polymerization of urea and formaldehyde without pre-treatment.
还考察了原位聚合法对聚合转化率的影响。
The effects of composites on the conversion rates of the polymerization are observ…
在不同压力条件下用原位聚合法制备了导电聚苯胺薄膜。
The conducting PANI films were synthesized by in situ polymerization under various high pressures.
采用原位聚合法结合多层造壁技术，对分散染料进行胶囊化。
Disperse dye microcapsules were prepared by means of in site polymerization combined with multiple layer shell method.
讨论了用原位聚合法合成物理发泡微胶囊的基本原理和一般工艺。
Principles and methods for producing thermal expandable microcapsule are introduced. Such microcapsules were mainly prepared by a limited coalescence suspension polymerization technique.
以螺恶嗪为芯材，用原位聚合法制备了蜜胺脂为壁材的光致变色微胶囊。
The photochromic microcapsules with melamine resin as wall material and spirooxazine as core material were prepared by situ polymerization.
采用原位聚合法用三聚氰胺-甲醛树脂包覆正十八烷，制备出相变微胶囊。
Phase change microcapsule was prepared by melamine-formaldehyde resin and n-octadecane through in-situ polymerization.
采用原位聚合法制备了聚乳酸-聚已内酯（PLA-PCL）／苎麻复合材料。
PLA-PCL/ramie fabric composite was prepared by means of in-situ polymerization.
分别对高、中、低三种温度类型分散染料，采用原位聚合法进行双层造壁微胶囊化；
Microencapsulated disperse dyes of S, SE and E types with double layered wall were prepared by in-situ polymerization.
介绍了电泳显示微胶囊的构成及常用制备方法（原位聚合法、界面聚合法及复凝聚法）。
Composition and common preparation methods of microcapsules for electrophoretic display, such as in-situ polymerization, interface polymerization and recoagulation, were introduced.
研究采用了以三聚氰胺-甲醛为壁材，正十四烷为芯材原位聚合法制备微胶囊相变材料。
Microcapsules loaded with tetradecane as the core material are prepared by in-situ polymerization methods.
本文以硬脂酸丁酯为相变材料，蜜胺树脂为壁材，采用原位聚合法制备了微胶囊相变材料。
Microencapsulated phase change material was prepared by situ polymerization with butyl stearate as phase change material, melamine-formaldehyde resin as wall material.
以尿素-甲醛为壁材，四氯乙烯为芯材，通过两步原位聚合法和一步原位聚合法制备微胶囊。
Microcapsules were prepared through two-step and one-step in situ polymerization method, with urea-formaldehyde as wall material, and tetrachloroethylene as core material.
本文研究工作分为两部分，第一部分是用原位聚合法以脲醛树脂为壁材制备缓释型香精微胶囊。
Two parts were included in this study, Microencapsulation of rose perfume with urea-formaldehyde resin wall were prepared by in-situ method in the first part.
以氨基安替比林为模板分子，采用原位聚合法制备了具有特定识别性能的棒状分子烙印聚合物。
The recognition of the molecularly imprinted polymer rod was evaluated by comparing the retention values of aminoantipyrine and its analogues.
结果表明，原位聚合法制备的长纤维增强ABS复合材料具有良好的浸润性及优良的力学性能。
The results show that the structure of ABS prepared by in-situ polymerization is similar to that of the commercial ABS, the good …
采用液态原位聚合法制备了碳纤维(CF)增强浇铸尼龙(MC尼龙)复合材料，研究了其吸湿行为。
Monomer casting nylon (MC nylon) composites reinforced by carbon fibers (CF) are prepared by liquid insitu polymerization, and their moisture absorption behaviors are studied.
概述了复合凝聚法、乳液聚合法、界面和原位聚合法、锐孔 凝固浴法等胶囊化的主要方法及其进展。
Methods and theories of the preparation of microcapsule were reviewed. Some approaches methods, such as heterocoagulation, emulsion polymerization etc.
采用原位聚合法，分别使用脲醛树脂和蜜胺树脂两种囊壁材料对生物农药-阿维菌素进行了微胶囊包覆。
The abamectin microcapsules were prepared by in-situ polymerization process in this work, with melamine-formaldehyde resin and urea-formaldehyde resin as wall materials respectively.
采用原位聚合法，分别使用脲醛树脂和蜜胺树脂两种囊壁材料对生物农药-阿维菌素进行了微胶囊包覆。
The photochromic microcapsules were prepared by in-situ polymerization, using melamine-formaldehyde resin as wall materials and photochromic materials as core materials.
采用三聚氰胺甲醛树脂（MF）作为囊壁，用原位聚合法对生物农药鱼藤酮进行包囊，制备微胶囊制剂。
The preparation of microcapsules of bio-pesticide rotenone by means of in-situ polymerization, with melamine formaldehyde resin(MF) as the shell material, is discussed in this paper.
采用原位聚合法，在聚丙烯酰胺的聚合过程中引入金属离子进行改性，合成了一种新型改性聚丙烯酰胺。
A novel modified polyacrylamide was synthesized through in-situ polymerization of acrylamide during which the metal irons was added into the reaction system.
本文采用原位聚合法以十二醇为芯材，以三聚氰胺-甲醛树脂为壁材，制备微胶囊相变材料并对其进行性能表征。
The microencapsulated phase change materials were prepared with in situ polymerization using dodecanol as the core, melamine-formaldehyde resin as the shell.
以密胺树脂为壳材、结晶紫内酯-硬脂酸-十四醇组成的热敏变色材料为芯材，采用原位聚合法制备热敏变色微胶囊。
The abamectin microcapsules were prepared by in-situ polymerization process in this work, with melamine-formaldehyde resin and urea-formaldehyde resin as wall materials respectively.
以密胺树脂为壳材、结晶紫内酯-硬脂酸-十四醇组成的热敏变色材料为芯材，采用原位聚合法制备热敏变色微胶囊。
The photochromic microcapsules were prepared by in-situ polymerization, using melamine-formaldehyde resin as wall materials and photochromic materials as core materials.
采用原位聚合法对分散染料进行双层造壁，制得分散染料微胶囊并应用于分散染料微胶囊/活性染料涤棉一浴法染色。
The pretreatment of pure cotton yarn was carried out using one bath method substituted conventional two bath and two step method in scouring and bleaching process.
以苯乙烯马来酸酐的共聚物树脂作为保护胶体，研究了其对原位聚合法形成蜜胺甲醛树脂微胶囊的乳化和成囊的作用机理。
The effect of the emulsifier styrene maleic anhydride copolymer(SMA) on the emulsification and encapsulation of melamine formaldehyde resin microcapsule was studied.
以丙烯腈为单体，二乙烯苯为交联剂，采用原位聚合法制备出了强极性的有机高聚物多孔层开管柱- OPPLOT - A型柱。
A new type of strongly polar organic polymer porous layer open tubular column (OPPLOT-A) was prepared by in situ copolymerization of acrylonitrile and divinylbenzene.
文中就聚合物对无机粒子表面进行包覆改性的原位聚合方法，包括接枝聚合法和乳液聚合法的研究现状进行了综述。
The methods to modify the surface of inorganic particles with in-situ polymerization, including graft polymerization and emulsion polymerization, were reviewed in this paper.
采用原位吸附聚合法使苯胺聚合于纸浆纤维的微孔壁中制备了导电纸。
In this paper, aniline was polymerized into the micro-pore wall of the pulp fiber by in-situ adsorption polymerization process in order to manufacture conductive paper.
应用推荐