是专业制造精密塑胶模和精密压铸模。
Precision is a professional manufacturer of plastic model (including thermoplastic and thermoset) and precision die-casting mould.
有压铸模具设计经验者优先。
铸件螺纹脱模是压铸模设计的难点之一。
In the design of die casting die with screw thread, the automatic screw thread unloading is a difficult point.
本公司是一家专业的塑胶模具、压铸模具制造厂家。
The Company is a professional plastic mold, die-casting mould manufacturer.
研究热管结构对压铸模具冷却能力影响的定量关系。
The quantitative relation between hot pipe structure and cooling ability of partial die casting mould was approached.
通过上述方法可提高压铸模的设计效率，缩短设计周期。
By above methods, the design efficiency is increased and the design periods is shortened.
压铸模具的型芯变形失效很容易造成铸件的成批量报废。
During die casting, core deformation resulting in batches rejected castings is very easy.
某厂铝合金烤盘压铸模因模面出现大面积龟裂而早期失效。
Large area crack appearing on the surface of the aluminium alloy bakeware casting dies causes its early failure.
阐述了不同压铸模分型面对模具工件和压铸件质量的影响。
According to the typical example and analysis of split face design, the influences of different split faces on die-casting quality are elaborated.
本公司擅长设计和制作各种吹塑模具，注塑模具和压铸模具。
My factory is good at making any kind of plastic blowing mould, injection mould and die-casting mould.
采用宏观分析、显微检验和硬度测定对压铸模进行了失效分析。
This failure analysis was performed by using macro check, micrography and hardness measurement.
旗下设有，河源市速达光电加工厂，山西速品精密压铸模具厂。
Its features, Heyuan City SuDa photovoltaic plants , Shanxi SuPin precision die casting plant.
在分析端盖零件压铸工艺的基础上，论述了压铸模的设计要点。
Based on analyzing die casting process of cover part, the authors discuss the main points of the design of die casting mould.
以汽车变速器后体为研究对象，探讨了反向工程在压铸模中应用。
Taken rear of automobile transmission as study object, the application of reverse engineering on casting die is discussed.
详细介绍了从压铸产品设计到压铸模制造全过程中应注意的问题。
The problems required attention during the whole process from die-casting products design to die-casting die manufacture are introduced in detail.
该压铸模一模四腔，带有齿轮-齿条传动旋转自动脱螺纹型芯机构。
There are four mould cavities and the gear-rack mechanism for the rotational automatic thread demoulding on the mould.
在压铸模具传热过程合理简化的基础上，建立了压铸模具温度场的数学模型。
On base of the reasonable simplification to heat translating process of die casting dies, the mathematical models of temperature field of die casting die were established.
这些方法已在注塑模和压铸模的设计制造中得到部分应用，取得了很好的效果。
The approach presented in this paper has been partly applied in certain cast and plastic injection mould manufacturing company, and the effect is fairly good.
为了提高斜销抽芯式压铸模设计的质量和效率，对传统的设计过程进行了优化。
In order to improve the quality and efficiency on die casting die design with oblique pin drawing core, the traditional design process was optimized.
压铸模设计中，根据要压铸零件支架的参数性能要求，设计定模和动模两部分。
Die-casting in the mold design according to toeing die-casting the parameter function request of the spare parts support, design to settle the mold and move two parts of mold.
有工程类产品的销售和市场经验，最好具备精密类压铸模零件或塑胶模具经验。
Experience in sales and marketing of engineering products, preferably with the experience in precision die-cast components or plastic mouldings.
为了研究压铸模与铝合金金属间化合物的形成与分解过程，进行了热浸铝试验。
The hot dip aluminum has been carried out to research the formation and dissolution of the intermetallic layer between die casting die and aluminum alloy.
交叉复合弯销与液压抽拔交叉型芯压铸模结构，用于压铸带内侧凹的杯形零件。
A die casting die with pumping crossed cores by crossed compound dog-led cams and hydraulic pressure is used for cupulate parts with inboard concave.
利用扫描电镜对失效压铸模具热疲劳裂纹的宏观、微观、断口形貌进行了分析。
The macro-morphology, micro-morphology and fracture morphlogy of failure die casting dies were analyzed.
介绍了国外压铸模CAD／CAM的研究进展和国内已经取得的成果和研究简况。
The application and research of die casting die CAD/CAM at home and abroad are intro duced.
分析了铝合金端盖压铸件结构工艺性特点，介绍了压铸模的浇注系统及模具结构设计。
The structural characteristics of aluminum alloy cover was analyzed, and the design of pouring system and die-casting die structure were introduced.
同时，从压铸机选择、工艺参数设置、浇注系统设计角度探讨了压铸模设计关键技术。
The key technologies for die casting die were approached from some aspects of selecting die casting machine, setting processing parameters, designing gating system.
分析了铝合金水龙头零件的结构工艺性特点，介绍了压铸模的浇注系统及模具结构设计。
The structural characteristics of the aluminum alloy tap part were analyzed, and the design of pouring system and die-casting die structure were introduced.
近年来，模具CAE技术虽然已在注塑模、压铸模设计中得到应用，但仍存在不少问题。
Though mold CAE technology has already been used in injection mould and die casting mould design recently, there are still many problems.
近年来，模具CAE技术虽然已在注塑模、压铸模设计中得到应用，但仍存在不少问题。
Though mold CAE technology has already been used in injection mould and die casting mould design recently, there are still many problems.
应用推荐