骨盆是由薄加强侧壁形成的扣和压缩载荷下的磨损。
The pelvic bolster is formed from thin lateral walls that buckle and tear under compressive loading.
讨论了偏心率对平均压缩载荷和载荷-位移曲线形貌的影响。
The influence of eccentricity on the configuration of load-displacement and mean crush load was discussed.
生理压缩载荷下，分别对9种有限元模型的生物力学参数进行测试。
The biomechanical parameters of 9 finite element models were measured under axial compressive load within physiological range.
结果指出：模具钢渗硼层在多次冲击压缩载荷下发生一定的塑性变形。
The boron-doping technology and metallurgical micro-structure of die steel are discussed from the angle of its resistance to repeated shock compression.
三维建模技术，包括3D分析接触气瓶，卷曲，球囊扩张和血管压缩载荷模型。
The 3D modeling technique consists of 3D analytical contact cylinders to model the crimping, balloon expansion, and the vessel compressive loading.
在相同轴向压缩载荷作用下，AFC组椎弓根钉受力移位较内固定组明显减小。
Under the same axial compression load, the dislocation of the pedicle screw in AFC group was apparently less than that in fixation group.
根据计算结果，讨论了三种碳管压缩过程中的构型、能量、压缩载荷等的变化及其差异。
According to the obtained results, the variations and difference of geometrical configurations, energy and external loading for the three carbon-tubes during the compression were discussed.
根据计算结果，讨论了三种分子压缩过程中几何构形、能量、压缩载荷等的变化及其差异。
According to the obtained results, the variations and differences of geometrical configurations, energy and external loading for the three molecules during the compressions were discussed.
辅助夹具有效地传递了压缩载荷和扭转载荷，并保持力和力矩中心线在试验过程中始终不变。
The compressive load and torque were transferred effectively. The Central Line of the force and torque...
采用准静态压缩试验，得到不同规格的空气垫压缩后的接触面积和压缩载荷特性，并与模型理论值比较。
The quasi-static compression was employed, through which the comparison was made between the models and experimental values of the contacting areas and static compressing curves.
采用准静态压缩试验，得到不同规格的空气垫压缩后的接触面积和压缩载荷特性，并与模型理论值比较。
Simulation on quasi-static compression has been carried out to see the influence of the structural parameters used for the honeycomb composites on their capability of absorbing energy.
应用双剪理论对岩石在三轴压缩载荷下的强度和破坏特性进行了理论分析，并将分析结果与已有实验作了对比。
The characteristics of the rock strength and failure under triaxial compressions are theoretically analyzed in detail with the twin shear theory and the results are compared with experimental data.
结果：（1）与假手术组比，骨质疏松对照组的股骨颈最大载荷、第2腰椎最大凹入载荷和第3腰椎最大压缩载荷3项力学性能指标分别降低了50%、40%和27%（P<0·05）。
Results (1)Three mechanical indices of FN, L2 and L3 in rats of OVX decreased by 50% (P<0.05), 40%(P<0.05) and 27%(P<0.05), respectively as compared with that of SHAM.
除了提供包加密外，2.6内核还通过IP有效载荷压缩(IP Payload Compression,IPComp)提供了改进的传输。
In addition to providing packet encryption, the 2.6 kernel offers improved transmission via IP Payload Compression (IPComp).
Dragonlab将为太空试验提供平台，其中包括恢复压缩的和一些未压缩的载荷以及部署小太空船。
DragonLab provides a platform for in-space experimentation, including recovery of pressurized and some unpressurized payloads, as well as deployment of small spacecraft.
本文概要介绍受振动载荷作用的圆柱压缩螺旋弹簧的模糊优化设计。
This paper briefly introduces the fuzzy optimum design of the cylindrical compressed screw springs under vibrating load.
利用优化设计和可靠性设计方法，提出变载荷圆柱螺旋压缩弹簧的可靠性优化设计方法。
Applying optimization design technology and the reliability theory a reliability-optimum design method of variable load cylinder helix compression spring is presented.
研究了轴向坐封载荷与胶筒的峰值接触压力和轴向压缩量之间的变化规律。
The laws between axial set-down loads and maximum contact sealing pressure, and axial compressed displacement were studied.
介绍板在单向压缩和剪切载荷作用下的屈曲模态、临界载荷和平衡路径。
This chapter indicates buckling modes, critical load and equilibrium path of plate under axial compression and shear load.
自动调节气压卸荷导轨利用压缩空气支承部分导轨载荷，以降低导轨面上的正压力，从而降低摩擦力。
In the automatic regulating pneumatic unloading guideways the compressed air is used to support part of the guideway load in order to reduce the normal force on the guideways.
合成氨装置应能够连续运行并稳定在70%的载荷下压缩机无需再循环。
The ammonia plant shall be able to run continuously and stable at 70% load without recycling in the compressors.
泡沫铝是一种性能优良的缓冲吸能材料，研究其在静动态载荷作用下的压缩力学行为和吸能性能具有重要意义。
Al foam is a nice energy-absorption or packaging material, so a study of its static and dynamic compressive mechanical behaviors and energy-absorbing capacity means much to the structural design.
根据土的物理力学性质指标，天然湿度下载荷试验和浸水载荷试验，认为：盐渍土是具有中等压缩性和湿陷性的土。
With reference to its physico-mechanical property indexes, load tests and soaking load tests at natural temperatures indicate that the salt lick soil has medium compressibility and wet depressibility.
弯曲载荷可以对一个物件同时产生压缩应力和张应力么？
Can a bending load makes both compressive and tensile stress in a member?
用有限元方法分析了一种圆柱疏圈螺旋弹簧的压缩变形过程，获得了弹簧的力学参量分布、载荷-行程曲线等结果，包括了弹簧发生塑性变形的情况。
The compression process of a cylindrical-helical spring is analyzed. Distribution of the spring's mechanical parameters and load-distance curve are achieved. Plastic deformation is included.
对充满液体的薄壁圆柱壳经受轴向压缩时的屈曲载荷和屈曲模态进行了弹塑性屈曲分析。
The elastic plastic buckling analysis is completed on bucking load and buckling mode of thin wall cylindrical shells fully filled with liquid under axial compression.
通过应用瑞利里兹法研究了分层椭圆几何参数和缝线等效弹性系数对压缩屈曲载荷的影响。
The effects of geometry parameters of ellipse and stitching thread on buckling loads are investigated by Rayleigh Ritz energy method.
本研究观察了版纳小型猪近交系椎骨、肋骨的解剖学、组织学形态，并对其腰椎进行轴向载荷压缩试验。
The morphology of anatomy and histology of vertebra and rib, and vertical compression on lumbar vertebrae in inbreed line Banna mining were studied.
本研究观察了版纳小型猪近交系椎骨、肋骨的解剖学、组织学形态，并对其腰椎进行轴向载荷压缩试验。
The morphology of anatomy and histology of vertebra and rib, and vertical compression on lumbar vertebrae in inbreed line Banna minipig were studied.
压缩机容量控制采用多段式或无段式，提供更大范围的制冷量，载荷性能好，稳定性和可靠性高，可大大提高节省能源。
Compressor capacity adopts many sections or no sections, providing a wide range of capacity, good load performance, stability and high reliability, greatly improving the ability of energy-saving.
应用推荐