实践证明，该压缩模结构合理，产品质量稳定。
The practice shows that the compression_mould structure is reasonable and part quality is stable.
针对敞开式压缩模在生产中出现的问题，对工件进行分析研究，提出新的工艺方法，以冷挤压工艺取代冷冲压工艺。
On the problem of open compression die emerged in production, the part is analyzed and a new processing method is put forward. Cold punching technology is replaced by cold extrusion technology.
它与Skype在许多方面都是一模一样的，除了一点：它运用了开放式标准来管理通话。尽管如此，它的压缩算法和顾客软件跟Skype的一样，都是独家专利。
This is identical to Skype in most respects save one: it USES open standards for managing calls, though its compression algorithms and client software are as proprietary as Skype's.
空气清扫装置可以将任何烟雾物质和可压缩物吹离口模。
The air sweep can direct any smoke and condensables away from the die.
在理论上分析了利用非线性光学环形镜作为等效可饱和吸收体压缩脉冲进行锁模的物理机制。
The advantages of using NOLM as saturable absorber to compress pulse in mode-locked fiber lasers are analyzed theoretically.
介绍一种利用压缩空气顶出塑料件的注射模结构。并指出设计、制造过程中应注意的几个问题。
It introduce an injection mold structure to eject the plastics part with compressed air, and points out several problems to pay attention to during the designing and manufacturing.
高压压缩了聚合物并能使更多的材料流人模腔。这样，“收缩”就减少了，生产的成型件的质量就得以提高。
The pressure compresses the polymer and allows more materials to flow into the mold. Shrinkage is reduced and better quality moldings are produced.
数值模拟了非线性功率脉冲在光纤中的脉冲演化过程，发现利用非线性可以压缩每一脉冲的偏振分量和减小偏振模色散(PMD)。
Nonlinear pulse evolution transmitted in fiber was stimulated through computer. We find that nonlinearity can compress pulse and reduce polarization mode dispersion (PMD).
介绍了冰箱压缩机底座消失模铸造生产中所用的EPS发泡件成型模具的设计过程、结构特点和使用方法。
The designing process, structure characteristics and operating method of the EPS foaming mould used in the lost foam casting production of the compressor pedestal were introduced.
对引进的离心压缩机窄三元叶轮的测绘技术进行了研究；对技术关键点作了探讨，重点介绍了石膏、石蜡灌模及其处理工艺措施。
In this paper, the introduced mapping technology for narrow 3-d impeller of centrifugal compressors has been in further researched and some key points have been discussed.
通过腔镜向腔内注入压缩真空态光场，使腔模向压缩真空态光场衰减。
The cavity mode couples to an injected squeezed vacuum, and the atom is also driven by an extrnal laser field.
并在上述研究的基础上，提出了一种制备多模叠加光场并使该光场产生压缩效应的实验方案。
Based on these, one newly experiment prepare plan for generation of multimode squeezed state light field is raised.
随着场模结构参量的增大，熵压缩的演化周期缩短，压缩时间延长；
The influences of the atomic motion and the field mode structure on the atomic entropy squeezing are discussed.
目的研究四态叠加多模泛函叠加态光场的高次振幅压缩特性。
Aim To study the higher-power amplitude squeezing properties of the four-state superposition multimode functional superposition state light field.
生物质颗粒燃料的生产技术主要有两种方式，一种是热压缩挤压成型技术，另一种是高压模腔成型技术。
Biomass pellet fuel production technology mainly has two ways, one is a hot compression extrusion molding technology, the other is a high pressure cavity forming technology.
本文推导了三个全同的谐振子系统与一个非马尔可夫库相互作用时满足的非马尔可夫主方程，并在此基础上讨论了系统的三模纠缠和压缩。
We do not make the rotating-wave and markovian approximations on the interaction Hamiltonian and treat the environment as a non-markovian reservoir to the oscillators.
重点讨论了口模参数的设计及其影响因素、复合点选取的依据及其优缺点，还就定型段、压缩段、分流段和发散段的设计进行了说明。
The design of the die parameter and its influence factors, conditions of selecting composite sites, and their advantages & defects are discussed specially.
被填充的粉末被压缩在一个预定的压力上采用下模冲方式完成药片。
The filled powder is compressed at a predetermined pressure using an upper and bottom punch to complete the tablets.
小型全封闭式氦气压缩机是G-M制冷机的配套设备，广泛应用于空间环模设备、真空低温泵、真空镀膜等。
Small totally enclosed helium compressor is a componend equipment of G-M refrigerator. It is widely used in space environment simulation equipments, vacuum cryopump and vacuum coating equipments etc.
通过包括施加有性质赋予液体(101)的金属模(61)在内的所述一对金属模(51,61)夹持和压缩所述木质件(1)。
The wooden piece (1) is sandwiched and compressed by the pair of metal molds (51, 61) including the metal mold (61) to which the property granting liquid (101) is applied.
单模腔场的压缩性质受到外加驱动场的拉比频率，腔模频率与外加相干场频率的失谐量以及腔场衰减速率的影响。
The squeezing of the single mode cavity field is influenced by the driving field Rabi frequency, the cavity-mode frequency detuning from that of a coherent external field and the cavity decay rate.
提出一种利用一个二能级原子与一两模腔场的非共振相互作用制备纠缠压缩相干态的方案。
It is based on the nonresonant interactions of an atom with two field modes located in two separated cavities.
目的研究任意多态叠加多模叠加态光场的广义非线性等幂次差压缩特性，从理论上导出该光场呈现高次差压缩的条件。
Aim To find out the squeezing conditions theoretically and the properties of equal-power nonlinear difference squeezing in multimode radiation field with any amount of states superposing studied.
目的研究任意多态叠加多模叠加态光场的广义非线性等幂次差压缩特性，从理论上导出该光场呈现高次差压缩的条件。
Aim To find out the squeezing conditions theoretically and the properties of equal-power nonlinear difference squeezing in multimode radiation field with any amount of states superposing studied.
应用推荐