无锡压电陶瓷，无锡压电陶瓷片厂家首选惠丰电子。
Wuxi piezoelectric ceramic, piezoelectric ceramic chip manufacturers preferred Wuxi Huifeng electron.
所述选针器采用压电陶瓷片，并采用“三功位”选针方式。
The selecting needle machine adopts a piezoelectric ceramics tablet, and adopts a three work bit selecting needle manner.
对自由压电陶瓷片，组合电声换能器。 600W的超声清洗器。
The vibration modes and frequencies of a free piezoelectric ceramic plate, an electro-sound combination transducer, an ultrasonic cleaner of 600W.
压电陶瓷片驱动的扫描电镜中纳米材料拉伸装置属于纳米材料原位测试领域。
A nanometer material stretching device in a scanning electron microscope driven by a piezoceramics plate belongs to the testing field of a nanometer material original position.
从压电材料的一维压电方程出发，推导出了压电陶瓷片以及压电堆的作动方程。
Start form the one-dimensional piezoelectric equation, the driven equation of the piezoceramic slice and piezoceramic-stacks have been calculated.
与用普通压电陶瓷片或电感线圈构成的振动传感器相比，这种传感器的灵敏度更高，频率响应宽。
Compared with piezoelectric ceramic vibration pickup or inductance vibration pickup, this vibration pickup has higher sensibility, more widely frequency response.
提出了嵌入形状记忆合金丝和压电陶瓷片作为联合变形驱动器的二元智能结构，并建立了有限元模型。
A hybrid smart structure integrated with shape memory alloy slims and piezoelectric ceramic patches as united actuators, was presented and modeled by finite element methods.
绘制出定子一阶弯曲振动时振型函数与应变曲线，得出压电陶瓷片位于定子一阶弯曲振动波腹处为最佳贴片方式。
The curves of vibration and strain under the 1st flexural vibration mode are illustrated. It is educed that sticking PZT pieces on the peak of vibration is the optimal method to stick PZT pieces.
在外界拉力下一个光纤布拉格光栅反射波长的漂移被转变成从另一个被压电陶瓷片调制的光栅反射的光脉冲间隔的变化。
The shift of reflective wavelength of one FBG under external strain is translated into a change in time interval of the optical pulse from another FBG drived by a PZT plate.
用压电陶瓷片直接制作这种换能器工艺比较复杂麻烦，形状受到了材料的制约，因此，在实际应用中受到了很大的限制。
Manufactured this kind transducer with the piezoelectricity is complex in techniques, the shape restricted by material, and much fetter in it application.
埋置于混凝土中的压电陶瓷片可用于混凝土结构的无损监测，而其自身的力学行为可视为一周边固定的复合薄圆板的振动。
The piezoelectric ceramic piece which placed in the concrete can be used in the monitoring of the concrete structure, and its mechanical action may see as a vibration of compound thin disc.
由于所研究的压电陶瓷片是由压电陶瓷层和薄铜片两种不同材料所组成，因此不仅存在自由度的耦合问题，同时还存在不同物理场的耦合问题。
This piezoelectric ceramic piece is composed of two kinds of different materials, there exits coupling question of degree of freedom, and the coupling of different physical field.
在机构的弹性杆件上贴上压电陶瓷片作为驱动器，通过测量弹性杆上输出点的动态应变，确定机构动力系统的状态，实时地进行最优反馈控制。
The state of the dynamic system is determined by measuring the dynamic strains of the output points at the flexible links, and the real time optimal feedback control in operated.
利用自驱动、自传感特性的压电陶瓷片，粘贴在外部结构的表面，结合动态阻抗的概念，提出了一种机电耦合的在线压电阻抗技术用于结构健康诊断。
Combined with impedance concept, a method for on line structure health monitoring based on self sensing piezoelectric patches, which are bonded on the surface of the structure, is presented.
结果表明，当压电梁振动阶数较高时，陶瓷片的横向布置对梁的振动特性影响很小。
The results show that the effects of orientation of piezoelectric ceramic on high order vibration characteristics of beam are low.
本文对压电陶瓷变压器的材料性能，工艺参数和瓷片的特性进行了一系列试验与讨论。
This paper presents a series of experimental results and discussions on the material behaviors, technical parameters and ceramic-disc characteristics of the piezoelectric transformer.
本文对压电陶瓷变压器的材料性能，工艺参数和瓷片的特性进行了一系列试验与讨论。
This paper presents a series of experimental results and discussions on the material behaviors, technical parameters and ceramic-disc characteristics of the piezoelectric transformer.
应用推荐