对沥青路面压实质量影响因素进行了全面的分析。
The paper overall analyzes factors affecting the pavement compacting quality.
最大干密度是确定填石料压实质量的一个主要指标。
The maximum dry density is a mainly index of compaction quality for rockfill material.
探讨了压路机在压实施工中，压实质量的动态控制问题。
This paper studied the problem of rolling quality's dynamic control in rolling construction.
目前普遍采用的碾压混凝土压实质量控制方法是密度法。
Density method is generally adopted for RCC compaction quality control at present.
在路基压实质量检测和控制中，压实密度是重要指标之一。
Density is one of key indexes for detecting and controlling the quality of compacted soil.
压实质量的好坏直接影响着沥青路面的强度、稳定性和耐久性。
The intensity, stability and durability of pavement are affected by the Compaction quality to a large extent.
实际数据对比分析表明，该方法能够满足压实质量的快速检测。
The comparative analysis on the actual data shows that the method can satisfy the quick detection of the compaction quality concerned.
对于填石路基填料，现行规范对其压实质量的控制缺乏有效指导。
To the rock filling roadbed, there is no effective instruction for the control of compaction quality in the current criterion.
土体刚度仪是一种路基压实质量检测新仪器，介绍了土体刚度仪的构造和原理。
The organization and principle of geogauge who is new measurement instrument for compacted quality of roadbed are introduced.
目前国内外堆石坝坝体压实质量都倾向于控制碾压参数为主，这将会有很大的主观性。
At present, the compact quality of rock dam at home and abroad is mainly controlled by the compact parameters, which leads to great subjectivity.
土石坝施工的核心是土石料的填筑压实，压实质量的好坏，关键在于能否正确执行压实标准。
The key link of embankment dam construction is fil ling and compacting of earth and rock materials and the compaction quality depends on whether the compacting standard is properly executed.
本文的研究成果对基于冲击压路机压实的厚铺层路基压实质量的快速、无损检测具有实际意义。
This paper's research results have practical significance in rapid, non-destructive testing for compaction quality based on the thick layer subgrade of impact Roller.
具体分析了路面接荐处以及特殊路段的碾压工艺和提高热拌沥青混凝土路面压实质量的关键技术。
It also analyzes the grinding and compaction technology for the combination point between the road surface and special road section, as well as the key technology to improve...
压实质量提高，由于冲击压实技术的应用，使得坝料的孔隙率大大降低，而各区压实的均匀性大大提高。
Compaction quality is improved, with application of impact compaction technique, greatly reduce the porosity of the rockfill to increase the compaction uniformity of each area.
最后对级配碎石进行了两种不同压实工艺的比较，并对同种压实工艺下不同级配碎石的压实质量进行了比较。
Finally, it compares two different compaction process of graded broken stone, it also compares the compaction quality of different graded broken stone in the same compaction process.
就提高沥青路面压实质量问题，从碾压温度、压实速度与遍数、振频与振幅及混合料特性几个方面进行了阐述。
From compaction temperature, compaction speed and times, oscillation frequency, amplitude as well as mixture performance etc, the paper expounds enhancing the compaction quality of asphalt pavement.
同时，发动机转速的恒定也使液压泵输出排量稳定，进而保证了行走速度和振动频率的稳定，提高了压实质量。
At the same time, constant engine speed stabilizes output displacement of hydraulic pump and then stabilizes travel speed and vibratory frequency in turn, so that compaction quality is increased.
对砂砾石料的工程性质、碾压参数和碾压方式对砂砾石料防洪堤坝兼做公路路基的压实质量的影响进行全面分析，可为此类工程实践提供参考。
On the basis of gravel engineering quality, rolling parameter and rolling means, the compaction quality with gravel as flood prevention embankment and highway subgrade is analyzed in an all-round way.
对砂砾石料的工程性质、碾压参数和碾压方式对砂砾石料防洪堤坝兼做公路路基的压实质量的影响进行全面分析，可为此类工程实践提供参考。
The general analysis on the impact of engineering property, rolling parameter and rolling mode on the compaction quality of gravel material can provide reference for similar engineering construction.
对现行土石混填路基压实质量控制指标和检测方法进行评价，根据控制指标之间的相互关系及适用范围，提出以压实度作为土石混填路基的压实质量控制指标。
The evaluations have been conducted on the control targets and test methods, which are used in the control of compaction quality of subgrade filled with earth-rock mixtures.
从影响铸件质量的主要因素出发，提出实时压射控制思路的由来，进一步涉及到实时压射控制系统的实质性内容，及其对压铸优质铸件所带来的实效。
The initiation of real time control thought from the key factors influencing casting quality was introduced, and then the essential content of real time injection control system was expounded.
从影响铸件质量的主要因素出发，提出实时压射控制思路的由来，进一步涉及到实时压射控制系统的实质性内容，及其对压铸优质铸件所带来的实效。
The initiation of real time control thought from the key factors influencing casting quality was introduced, and then the essential content of real time injection control system was expounded.
应用推荐