这是检测电瓶漏气用的胶球压力试验器。
多级压力、多级速度射胶调整。
由于不良的饮食习惯,压力和毒素,绒毛能成为受损-中断或堵塞了胶类有毒物质。
Because of bad eating habits, stress and toxins, the villi can become impaired - breaking off or clogging up with glue-like toxic substances.
四大辊车间是京山轻机的核心部件生产加工车间,瓦楞辊,压力辊,涂胶辊和匀胶辊均在这里加工成型。
Four major rolls workshop is the core machining workshop of corrugated rolls, pressure rolls, glue rolls and doctor rolls.
对影响产品性能的几个重要因素,包括胶凝材料用量、成型压力、物料含水率和养护制度等进行了研究探讨。
The important factors influencing the product performance are investigated, including the dosage of cementing agent, forming pressure, material moisture and curing regime.
研究了轴向坐封载荷与胶筒的峰值接触压力和轴向压缩量之间的变化规律。
The laws between axial set-down loads and maximum contact sealing pressure, and axial compressed displacement were studied.
阐述胶济线CRH2型动车组列车交会空气压力波实车测试情况,对测试结果进行详细分析,并将实车试验结果与数值模拟计算结果进行比较。
The real train test on air pressure pulses generated in passing of CRH2 EMU trains on the Qingdao-Jinan Railway Line has been made, and the results have been analyzed in details.
通过压力、高低温循环等大量的试验和理论分析表明:采用填充密封胶的螺纹联接密封结构具有优异的密封性,适宜在固体火箭发动机环境中应用。
Based on pressure and high low temperature cycling tests and theoretic analysis, the threaded joint parts filled with sealing glue compound show excellent seal ability, and can be applied to SRM.
将一端背胶揭开约10公分的一条,粘贴到展板上,然后拿到覆膜机上,调理压力至刚好经过展板为止。
One end of the back opened about 10 centimeters a, paste into the panels, and then get the laminating machine, conditioning pressure to just after the board so far.
如果使用更高压力,这种灌胶效应甚至可以被增强。
按照有关国际标准规定的液压胶管的安全系数,我们推荐的工作压力通常为胶管最低爆破压力值的四分之一。
According to the safety modulus of hydraulic hose ruled by international standard, we recommend that the working pressure is one forth of the minimum blast pressures.
下面,我们再简单介绍挤出机螺杆的压力及出胶量等方面的知识,供大家参考。
6 below, we will simply introduce the extruder screw pressure and the amount of plastic and other aspects of knowledge, for your reference.
它实现了对张力、含胶量、温度和压力的网络化控制。
It realizes the control of tension, ratio of glue, temperature nad pressure by networks.
本文研究了三种常用酚醛型粘合剂胶接nbr -金属模压件的固化压力依赖性。
In this paper, the curing pressure dependence of NBR-me-tal bonding of three common phenolic adhesives were studied.
随着顶部胶塞通过胶塞定位浮箍达到相应浮箍位置,水泥在压力指示确认下完成顶替过程。
Cement was displaced with pressure indications observed as the top plugs passed through the plug-locator collar and the top wiper plugs bumped on the respective float collars.
介绍各向异性导电胶导电机理和粘接工艺,以及影响它的粘接可靠性因素和最佳参数的研究,如粘接温度、固化时间、粘接压力、粒子含量等。
Many factors impacting on its bonding reliability and the optimum parameters of bonding were studied, such as bonding temperature, curing time, bonding pressure, conductive particles fraction.
用筛网系数评价弱凝胶体系成胶时间、转变压力评价强度是合理的。
It is reasonable using screen factor to evaluate the gelling time and using transformation pressure to evaluate the intensity.
但是系统上一般都有溢流阀,故冲击压力不会严重影响胶管的疲劳寿命。
To be luckily, there is an overall valve in every hydraulic system, so high impact pressure cannot affect the fatigue life-span seriously.
出胶系统合理,压力低。
资料中有关胶管的动态工作压力是指胶管连续工作时允许的最高压力。
The dynamic working pressure in this catalog refers to the allowable maximum pressure in condition of continuously working.
本发明涉及一种风力发电叶片压力面和吸力面两个半叶片合模用的粘接结构胶及其制备方法。
The present invention relates bonded structural adhesive for two half cane mold clamping of wind-power generating vane pressure surface and suction surface, and a preparing method thereof.
采用环氧树脂-DDS固化体系作为胶接剂,探讨了各种金属表面处理方法、胶接时对胶接面施加的压力、胶层厚度等因素对胶接剪切强度的影响。
The influences of surface treatments, the pressures during bonding process and the thickness of adhesive layer on shearing strength were investigated with epoxy resin-DDS curing system as adhesive.
双道三元乙丙胶条,利用压力平衡原理实现干式密封。隔热、防寒、隔音性能优异。
Dual EPDM tape utilizes the theory of pressure balance to realize dry-type sealing with excellent performance of heat insulation, winter protection and sound insulation.
在胶印机胶辊压缩区域面积计算和胶皮刚度测试的基础上,给出了一种计算胶辊弹性压力及其时域波形的方法。
On the basis of the calculation of compressed roller area and the rubber rigidity test, the authors give a method of calculating the elastic pressure of offset rollers and the waveform of time domain.
双道三元乙丙胶条,利用压力平衡原理实现干式密封。
Dry sealing is achieved by means of pressure balancing principle as it adopts double EPDM rubber sealing strip.
在金属圈内滴封包封胶,填充在硅压阻式压力传感器的四周,隔 绝传感器芯片与外界环境的接触。
Sealing gel is dripped into the metal ring and filled around the silicon piezoresistive pressure sensor, so as to isolate the chip of the sensor from the outside environment.
由于增加了气囊,管柱接箍通过胶筒时,液压腔内的压力升高很少。
Since the gas bag is added, the pressure increase within the hydraulic chamber is very slight when the string collar passes through the packing element.
胶筒下部钢套采用滑套式,在降低胶筒扩张压力的同时,使封隔器在井下受力更合理。
Sliding steel sleeve at the lower end of rubber barrel is used to make reasonable force arrangement for downhole packer meanwhile the expandable pressure of rubber barrel is decreased.
胶筒下部钢套采用滑套式,在降低胶筒扩张压力的同时,使封隔器在井下受力更合理。
Sliding steel sleeve at the lower end of rubber barrel is used to make reasonable force arrangement for downhole packer meanwhile the expandable pressure of rubber barrel is decreased.
应用推荐