计算管线内部流体荷载，也就是管系的压力分布计算。
The fluid load in pipeline is calculated, that is calculating the pressure distribution of pipeline.
气井井筒的压力分布计算对于气井设计及其动态分析具有重要意义。
The calculation of wellbore pressure distribution in gas Wells makes great sense for gas well design and performance analysis.
利用该算法，只需输入管道网络的邻接矩阵，即可自动产生流量压力分布计算的数学模型并进行实时动态求解。
It is shown that after the adjacency matrix of flow network is input, the algorithm can be employed to generate the model of flow network automatically and the practice with this method I...
计算结果表明，机械密封端面压力分布呈凸抛物线状，增加密封端面锥度可降低摩擦系数。
The calculation results show that the pressure distribution shape is a convex parabola and the increase of the radial taper of the seal face can decrease the friction coefficient.
计算结果表明，轴颈倾斜时，轴承油膜压力分布、最大油膜压力、油膜厚度分布和最小油膜厚度等都有明显的变化。
The results show that there are obvious changes at film pressure distribution, maximum film pressure, film thickness distribution and minimum film thickness when there is misalignment.
计算结果表明，其与不带有偏移量的辊间压力分布基本相同。
So during calculating the distribution of pressure between rolls, the model with offset can be instead.
求解压力分布是对轴承各项性能进行分析计算的基础。
Computing pressure distribution is the base of analyzing and calculating various performances of bearing.
对用这种方法得到的一个轴对称进水口曲面上压力分布，进行了松弛法计算，还对另一个进行了气流模型试验。
The pressure distribution along the curved wall of an axially symmetric inlet so obtained was calculated by the relaxation method, and that of another was measured from an air-flow model test.
实例计算表明渗流的非线性对孔隙压力分布模式有明显影响。
The case calculation indicates that the nonlinearity of the flow has an important role in the distribution of pore pressure.
运用自编边界元程序计算了闸门扰动时动水压力的分布，进而推导了附加质量阵的简化求法。
The hydrodynamic pressure due to the coupled vibration is studied with Boundary Element Method, and the simplified formula for the attached mass matrix is derived.
在工程实际中，当基础尺寸较小时，基底压力可当作直线分布，按材料力学公式简化计算。
In engineering practice, when a foundation size is small, the foundation pressure can be treated as linear distribution and simply calculated according to formulas of Mechanics of Materials.
本文提供了一种根据升力面理论计算螺旋桨桨叶表面压力分布和螺旋桨性能的数值方法。
A numerical method is presented for prediction of propeller performance and pressure distribution on blade surface according to lifting surface theory.
使用计算流体力学的方法，计算增加压力平衡槽后间隙密封中的流场分布。
The distribution of flow field in clearance seal with balanced-pressure grooves is calculated by using the method of computing fluid mechanics.
桨叶表面非定常压力分布的计算结果与测试结果的比较表明，本文的预报结果令人满意。
The unsteady pressure distribution on the propeller blade surface by the present program are in satisfactory agreement with experimental data.
计算结果表明，这种新方法不但能估计压力梯度，而且还能给出浆体速度分布。
The computed result shows that this new method can not only predict the pressure gradient but can also give the velocity profile.
计算出了旋流管内的压力场分布、各旋流管压力降以及压力降在旋流管各部件的分配比例。
The pressure field distribution in hydrocyclon, pressure drops of hydrocyclon and the pressure drops distribution ratio in the parts of hydrocyclon have been calculated.
以TNT为例进行了计算，给出了其爆轰波内压力、密度、流速和声速等参数的分布。
As an example, the distribution of the detonation pressure, density, particle and sound velocity along the detonation profile are given for TNT.
计算得到的壁面压力分布、出口处液膜内轴向速度分布以及雾角大小都与实验结果吻合的很好。
The predicted results of the wall pressure distribution, axial velocity profiles at the outlet and the spray Angle agreed well with the experimental datum.
同时，基于上海软土基坑的工程实践，提出了土压力计算的分布图式修正系数法。
And based on the practical foundation pit project of Shanghai, the method of amending coefficient of distribution graphics of earth pressure is presented.
最后，还对窄缝挑坎底板及侧墙上压力分布的计算进行了探讨。
Finally, the dynamic pressure distributions on the bottom and the side walls of slit-type buckets are discussed.
本文采用有限元数值方法和理论解析方法，对护环与转子本体配合面上的压力分布做了分析计算。
The pressure distribution on the surface of interference fit of retaining ring and rotor body is calculated by both finite element method and analytical method.
所有这些计算都考虑了波后非静水压力分布的影响。
The effect of non-hydrostatic pressure distribution downstream of the shock front is taken into account.
结果表明：车体迎风面及背风面表面压力分布规律基本一致，验证了数值模拟计算模型的准确性；
The results show that the pressure distribution on external surface at both windward and leeward is basically the same.
CO2在井筒流动过程中的气液相变对井筒温度、压力分布的计算有较大影响。
The CO2 phase change between liquid and gas in well bore flow has significant effects on temperature and pressure distribution in well bore.
计算了波纹板表面的压力分布，并指出在土壤与农机具粘附系统中波纹形表面摩擦力最大的位置。
For analyzing the adhesion between soil and tillage tools, the profiles of pressure on the wave bulldozing plates were calculated, and we located the position of the maximum friction on the surface.
用这种方式可以减少计算的工作量，算出的溢流面压力分布资料和试验结果符合较好。
The method is applied to free surface sluice gate flow over spillway and computed pressure distribution agrees satisfactorily with experimental results.
对定向井井筒压力分布，计算时根据井斜角的变化采取分段计算的方法。
According to the changes of deviation Angle calculated the pressure distribution of directional well.
利用有限元法理论，对密封圈的压力沿轴向的分布规律、泄漏量与压力变化关系进行了模拟计算。
With the theory of finite element method, the simulation calculation is conducted for the axial pressure distribution law, the leakage rate and the pressure variation of the seal rings.
以此方法模拟了喷管和二维叶栅的多个非平衡态凝结流动，计算和试验测量的压力分布较好地吻合。
The nucleating flows in nozzles and cascades are simulated by this method and good agreement is obtained between experiment and calculation.
以此方法模拟了喷管和二维叶栅的多个非平衡态凝结流动，计算和试验测量的压力分布较好地吻合。
The nucleating flows in nozzles and cascades are simulated by this method and good agreement is obtained between experiment and calculation.
应用推荐