在此基础上，建立了厂房结构可靠性的综合评定方法。
The integrated appraisal method of structural reliability of industrial building is set up on the basis.
本发明公开了一种大跨度特重型钢结构厂房结构及其设计方法。
The invention discloses a large-span mill construction with a super heavy-duty steel structure and a design method thereof.
应用振动测试方法，对机器振动对厂房结构的影响进行检测及分析。
The present paper aims to introduce its authors testing and investigation of the impact of machine vibration on the building structure.
论文的研究目的是准确评定厂房结构的可靠性，并制定有效的技术措施。
The purpose of this theme is determined to access the real structural reliability of the building with accuracy, and to make effective technical measures.
分析了厂房结构的自振特性和水力激振载荷作用下的动力响应（谐响应）分析；
Analyzing structure self-vibration features and dynamic response (harmonic response) under the effect of hydro excitation load.
对二、三十年代建造的老厂房结构破坏的原因进行分析，并提出了维修加固方法。
This paper makes a thorough analysis of the structural failure of early built factory buildings and introduces the way of reinforcement.
对二、三十年代建造的老厂房结构破坏的原因进行分析，并提出了维修加固方法。
This paper analyzes the structure failure of the waste heat boiler buildings built in early sixties and introduces a method of strengthening by steel adhesion.
摘要：本文主要介绍了整个主厂房设计过程中进行主厂房结构选型的设计优化工作。
Abstract: This paper mainly introduces the work of main building structure selection and design process of the main building in the design optimization.
论文的基本思想和研究方法对于其他类型的单层厂房结构的安全控制也有很大的参考价值。
Moreover the basic idea and research method in this paper offer a important reference to other types of monolayer workshop structure.
本文介绍一种用现场预制的折叠式V形钢筋混凝土折板作为承重墙和屋盖的单层工业厂房结构体系。
This paper describes the design of a single span one-story factory building, in which the reinforced concrete precast in-situ V-shaped folded plates were used for roofs and walls.
三峡电站厂房蜗壳外围混凝土结构由于其几何形态的奇异而成为三峡电站厂房结构中最复杂的结构之一。
The concrete structure surrounding spiral case of the Three Gorges power station's powerhouse becomes one of the most complicated structures of the powerhouse for its queer geometric figuration.
本文主要针对核电站工程中辅助厂房结构与地基土相互作用体系在地震荷载下的“平-扭”地震响应进行了分析。
This paper is concerned with the dynamic responses of the soil-auxiliary buildings structure interaction system in the nuclear power plant.
通过上述研究，得到了目前采用平面模型分析所不可能得到的许多新的认识，可作为整体厂房结构抗震设计的参考。
Based on above results much information is obtained, which cannot be obtained by plane structural model analysis. The results can be used as reference for earthquake-resistance dyn…
根据试验要求和厂房结构形式，本论文的模型试验在发电机层采用拱顶送风系统，风口对称均匀布置，选取5种风口布置方案。
Adopt arch crest as air supply system, arrangement vents symmetry, and select 5 kinds of vents to arrange the project, according to the experiment request and factory premises construction form.
介绍了利用南向天窗、排雾塔、锯齿形厂房结构、回流式冷凝器及复合式排雾装置的排雾原理和方法，并提出了今后的研究方向。
The principles and practices for mist-removal are presented by southern-facing skylights, zigzag roof configuration, mist-exhaust tower, flux condensers and combined mist removal system.
本文以国内某厂顶溢流式厂房为研究对象，建立了动力分析有限元模型，结合厂房结构自振特性及可能的振源特性进行了共振校核。
For a roof overflow powerhouse under construction in China, a dynamic finite element model of the powerhouse was established to study its vibration characteristics.
但是，对于承受一些特定的较大设备荷载的厂房结构，特别是各榀横向平面框架的刚度不同时，在竖向荷载作用下的空间作用有一定的体现。
But for factory structures under great equipment loads, the space work is shown more or less especially when every horizontal frame is different in rigidity.
利用研制的程序(IFSA)就桥式吊车及其它荷载作用下的屋盖网架与框架柱共同工作时的内力、位移等问题进行了研究和探讨，得出了桥式吊车荷载对整个厂房结构的影响范围及大小。
In this paper, IFSA programme is employed to study the internal force and displacement when the roofing grid and frame column under the effect of bridge crane and other loads work together.
周六，福岛第一核电站一号反应堆钢和混凝土结构的厂房发生爆炸，但日本官员称，爆炸并未危及反应堆核心。
On Saturday, the steel and concrete building housing the Fukushima Daiichi Number One nuclear reactor was blown apart by an explosion, but officials said the blast had not breached the reactor’s core.
针对本工程为重型钢结构，对厂房采双层格构式刚性支撑方案，单位面积用钢量节省10%左右。
For this project is a heavier steel structure, plant production double-layer lattice rigid support scheme, the amount of steel per unit area save about 10%.
这种新的设计概念及方法同样适合于房屋、厂房及高耸结构抗震设计。
This new design concept is also applicable to the aseismic design of buildings, factories and tall structures.
根据目前中国的市场价格，轻钢结构的造价已经低于钢筋混凝土结构，当厂房的跨度越大时，其优势更为明显。
The present market price of light steel structure is lower than the reinforced concrete structure, if the span of plant is greater its advantages become more obvious.
研究了附加质量的计算方法，分析了附加质量对水电站厂房支承结构自振特性的影响。
The calculation method of additional mass is investigated. The influence of additional mass on the dynamic characteristics of supporting structure is also obtained.
对厂房的布置及结构作了简要介绍。
The layout and structure of the powerhouse are briefly presented.
厂房上部结构形式可归纳为梁柱方案、实体墙方案和墙柱方案。
The structural patterns included mainly the beam and column scheme, the solid wall scheme and the wall and column scheme.
轻钢结构在工业厂房及民用设施中得到了广泛应用。
Light steel structures have been widely applied for industrial plants and civilian facilities.
对原有厂房进行检测鉴定，负责主体结构加固图纸设计及外围加固图纸审核校对。
On the identification of the facility for testing, is responsible for the design of the main structural reinforcement drawings and other external reinforcement drawings audit proofing.
原有空间间隔与两幢厂房之间，是一个运货通道，顶面留着旧有的钢结构轻质顶棚。
The original space between the two plants and the space is a shipping channel, the top left the original lightweight steel roof.
广泛适用于钢结构厂房、吊顶、墙体、空气洁净室的大面积吊顶与隔断。
Widely used for large area suspended ceiling and separation of steel structure workshop, suspended ceiling, wall body and air purification room.
厂房和设备的位臵、设计、结构、改建和维护保养应适合于所进行的操作。
Premises and equipment must be located, designed, constructed, adapted and maintained to suit the operations to be carried out.
应用推荐