当将单片机用作测控系统时，系统总要有被测量信号的输入通道，由计算机拾取必要的输入信息。
While using MCU as detecting system, input channels of measured signal should always be demanded in the system, and the necessary input information is collected by computer.
该设计采用单片机编程软件对其内部功能模块进行控制，从而达到测量的目的。
The design uses a microcontroller programmed to control its internal function blocks to achieve the purpose of measurement.
利用组态王和单片机通信进行模拟量的测量，在PC上应用生动形象的画面进行显示；
With the use of KingView communication with single-chip, this design measures the analog signal and finally displays vivid image in PC.
为提高某型飞机轰炸军械系统的故障检测水平，采用单片机控制与测量技术研制了轰炸军械系统及所属机载军械设备故障检测仪。
For raising the fault test level of the bombing ordnance system of the plane, the author developed the fault test instrument using microprocessor in bombing ordnance test system.
硬件部分采用51系列单片机实现，水下测量浮标通过RS- 485串行口与岸站接收处理系统进行通讯。
Microcontroller of 51 series is applied in the hardware and the underwater buoy communicates with the receiving and processing system of the land station by RS-485 serial interfaces.
文中以at89c52单片机为核心，阐述了多场合温度测量控制系统的设计，讨论了系统软件、硬件的设计原理和方法。
In the text, it USES AT89C52 as core, elaborated the design of control and temperatures measure system, discuss the design principle of the system software, hardware and method.
利用单片机的定时器可对信号进行实时测量分析，该方法智能、灵活、经济、实用。
Using the Timer of the Single-chip Processor can measure and analyse the real -time signals. This method is intellectual, flexible, economic and practical.
该系统由PC机，MCS - 51系列单片机以及数字电参数测量仪组成。
This system is composited by PC, MCS-51 microchip and digital electric parameter detector.
介绍了一种基于单片机的切纸机位移测量系统。
This text introduces a measure system based on Single chip which can monitor displacements of the paper cutter.
分析了基于AT89S51单片机的角度测量的硬件组成、电路设计原理。
The hardware structure and principles of the circuit design of the angle measuring device based on AT89S51 are analyzed.
论文基于普通的体硅工艺设计实现了一个单片集成式硅微惯性测量组合。
This paper presented one single chip micro inertial measurement unit based on ordinary bulk micromachining process such as dissolved wafer process.
本文介绍用单片机作在线电阻测量的原理、线路和提高在线电阻测量精度的几种措施。
This paper describes the working principle of single chip microcomputers in dynamic resistance measurement, the circuits and various methods of improving measurement accuracy.
设计了单片机控制双臂电桥测量低电阻电路、多谐振荡测量电容电路、辅助调平电桥电路、输出显示等电路。
The two-arm bridge measuring low resistance circuit of MCU control, multivibrator measuring electric capacity, auxiliary leveling bridge circuit, output display circuit are designed.
焊管机组板速、板长测量仪是以单片机技术为核心开发的应用于制管车间板速和板长测量的装置。
Strips width and length measuring meter of welded pipe unit is applied for strips width and length measuring unit on pipe mill based on single chip technology as core developed.
通过对污水流量的测量原理的分析，设计出以单片机AT89C2051为核心的流量测量系统。
The flow measuring system based on the single chip processor AT89C2051 is designed by the analysis of the measuring principle of sewage flow.
本文介绍了在激光加工中，采用单片机构成激光脉冲能量的测量与控制系统。
This paper presents the laser pulse energy measuring and controlling system using single chip computer in laser machining.
介绍了ADE7757芯片的结构和测量原理，并提出了一种以ade7757和P 87lpc764单片机为核心的电能测量的方法。
The paper introduces the structure and measuring principle of the ADE7757 chip, and suggests an electric energy measuring method based on ADE7757 and P87LPC764 microcontroller.
采用PID同步控制算法、单片机控制技术和光电数字测量技术，研制了多电机同步传动微机控制装置。
By adopting PID synchronous control algorithm, single chip microcomputer and photoelectric digital measuring technology, multi motor synchronous drive microcomputer control device ws developed.
针对激光瞬态散斑测量中所应用到的单脉冲、双脉冲激光光源，研制了基于AT 89 C51单片机的激光瞬态测量用光源的脉冲发生器。
In this paper the solid state laser trigger based on AT89C51 MCU is developed used for single or double pulse laser light source, which is used in laser transient speckle-shearing measurement.
通过对污水流量的测量原理的分析，设计出了以新型单片机PIC 16c73为核心的流量测量系统。
The flow measuring system based on the new type of single chip processor PIC16C73 is designed by the analysis of the measuring principle of sewage flow.
同时，PC机控制单片机系统驱动步进电机，完成整个光度测量过程。
Meanwhile, the PC controls the MCU to drive the step-motor to implement the whole measurement process.
比较了常见的转速测量方法，指出了它们的不足，提出一种基于单片机的转速测量算法。
The common measurement methods of rotary speed were compared and their shortcoming was pointed out, a measurement algorithm of rotary speed based on micro-controllers was proposed.
本文讨论用单片微机系统实现真空测量的智能化。
This paper is about how to realize the intelligent measurement of vacuum with the microcomputer system.
通过对步行速度的测量可以启动存储于单片机中相应的力矩模式，从而实现跟踪步行速度的膝力矩自动控制。
Based on speed measurement during walking, the corresponding moment pattern which has been stored in a micro computer, will start. Therefore, the knee moments can be changed automatically.
本文提出了用8031单片机系统来完成电感测量的方法，介绍了软件设计，给出了硬件电路原理图。
A method for a system with 8031 single chip microcomputer to measure inductance is presented. The software designing is introduced and the circuit diagram is given.
硬件电路主要包括：单片机接口电路，电源及控制电路，测量电路。
Haredware circuit mainly including microcontroller interface circuit, electrical source and control circuit, measure circuit.
论文以该传感器为步速采样传感器，研制出基于AT89C51单片机的步速测量模块。
Using this sensor as walking speed sampling sensor, this paper develops the measurement module of walking speed based on AT89C51 singlechip.
该测头采用PSD作为敏感元件并采用单片机技术完成对测量数据的处理。
The PSD (positinon sensitive detector) is utilized as the sensitive detector of the sensor, and the microprocessor to implement data processing.
该测头采用PSD作为敏感元件并采用单片机技术完成对测量数据的处理。
The PSD (positinon sensitive detector) is utilized as the sensitive detector of the sensor, and the microprocessor to implement data processing.
应用推荐